Chosen Solution
I’m upgrading my mid-2010 iMac 2389 and I have the iFIXIT kit in hand. What are the correct reassembly steps involving the OWCDIDIMACHDD09 that’s included? I know how to position the adhesive backed temperature sensor on the SSD, and where and how to attach the two strand sensor cable on the logic board. Are both or either of the three and the five strand SATA connectors on the OWC used in a reassembly employing the ICY DOCK MB882SP-1S-3B that’s included in my kit? If they are, how?
It goes in-between the power feed cable and the drive which is held in the Icy Dock in your case. I use a different adapter frame which doesn’t offer the conversion of the connectors to the 3.5” drives alignment. I figure its one less point of failure.
