Posts

Chosen Solution Are there any reccomended tools for fixing this blender? Thanks in advance! Yes. All the tools you need to fix this blender are in the Pro Tech Toolkit. Here is the link to purchase a kit. [linked product missing or disabled: IF145-072-1] Hi, in my case I only needed a screw driver, but of cause, it depends on what actually is broken. If you just need to replace the small metal drive pin which you can probably find in a close hand tools shop, so no more tools need for it....

Chosen Solution Need to take oven apart to clean after accdent what type of screws are holding the oven to gather. They resemble Allen tyoe but I’m not sure as I can’t see them that good. If you could take pictures of the screws and upload them that would help us identify them. But the best thing to do would be to buy the ifixit bitset that way you have all of the bits available....

Chosen Solution I know that most of you have encountered this problem, but I can’t seem to find an easy solution. Yesterday, I was repairing a hair iron everything went fine until I forgot to re-install a part and had to disassemble again. Unfortunately, I managed to strip the head of a screw– requiring me to drill out the head to be able to reopen the case. Now I am missing a 1 cent screw which I need....

Chosen Solution where does this rubber ring go back to? i removed the logic board and this popped out and i couldn’t figure out where it goes. is it underneath the gold screw with the hole at the top of the head? (the only non-philips screw on the inside of the iphone? you need a flathead for it) Thanks Ok, so it’s not the back camera Are you sure its rubber?...

Chosen Solution I can’t completly close my Mac. The top part of the case is fine but the bottom part is “bowed” up. I haven’t taken it apart yet. The Mac runs but is very slow and some of the keys don’t seem to work. I didn’t use it for 6 months because I use an iMac at work. Before I stopped using it the battery would only had a usage time of about 2 hours....

Chosen Solution i have a LG 60LB7500 it won’t turn on and the light blinks 6 times @becool start off by removing the back of your TV. do a visual inspection. Check for obviously damaged components like domed or leaking capacitors. Post some pictures of all of your boards with your question. That way we can see what you see. Use this guide Adding images to an existing question for that....

Chosen Solution When I fill my washer with clothes and then start it it fills but does not run. I tried to move it to rinse but it does not. Any help? If your washing machine is not starting or running when you fill it with clothes and try to start a cycle, there are a few potential causes to consider. Here are some steps you can take to troubleshoot the issue: Make sure that the washing machine is properly connected to a power source and that the power switch is turned on....

Chosen Solution When you turn on the laptop, a thin horizontal black line appears that occupies the entire screen. Curiously, they are removed by lowering the screen and leaving it approximately 5 fingers. Update (01/16/2022) Ouch! I’m suspecting the ribbon cable connection to the LCD has become damaged. So its making and breaking contact. Sadly, this requires a new display assembly MacBook Pro 13" Retina (Mid 2018-Mid 2019) Display Assembly And here’s the guide MacBook Pro 13" Touch Bar 2018 Screen Replacement

Chosen Solution I dropped my iPhone 7 a while back and it started vibrating really loudly after that. After getting annoyed I decided to open up the screen with the tools i have since I’ve been replacing screens and cameras in iPhones for years. I fixed the vibration and when starting the phone up it took forever, and the Touch ID and 3D Touch won’t work. I can’t add fingerprints or use it for any apps or to unlock my phone....

Chosen Solution The touch screen on my Chromebook pixel does not work. No physical damage and the rest of the Pixel book works flawlessly try hard reset first If the reset doesn’t work and the device is out of warranty then try reseating the cables. Ive found with Chromebooks compact designs the cables back out easily. If you want added assurance use some anti-static tape to help keep the cables mounted....

Chosen Solution Hi, so my problem is that the panel has 2 horizontal stripes that alternate between black and brighter color. At the same time this happens the backlight dimmers down and up again. Turned off all dimming option and other things I’m the settings. Updated the software. Changed the Lvds cables and clean and reset all contacts. Is it something else I can try? Thank you in advance Samsung 65ks7005 Tv Update (08/25/2018) Can you see the video :) ?...

Chosen Solution i have 65 inch curved UHD samsung smart TV that has a busted screen how much would it cost to fix the screen itself and is it worth it? @matthew3707 replacement Displays (specially this size) are incredibly hard to source. If you do find them they often cost you more than a new TV. Of course always check ebay or Craigslist, local pawn shops etc. and see if you can find a TV same model that you could use to harvest the display from....

Chosen Solution Hello… I’am facing an Occasional two fuzzy vertical lines and some unstable touch functionality like ghost touches and unresponsive screen,However, when the two lines appear the touches seems to be working perfectly except for the region where the two lines , when the two lines are not appearing I may face a ghost touches and unresponsive screen, only in the right side of my screen, moreover, the adhesive stripes of the battery i guess they are not working anymore because can hear the battery moving in it’s housing, and also the front panel covering the LCD connectors with the board is missing… I’am 60% sure that this is caused by the Electric static charges from the battery....

Chosen Solution After finishing the job, my roomba i3+ doesn’t empty automatically. The error says “Unable to empty bin: motor problem”. I’m living in Europe and iRobot support is not helping me I assume the tower has an issue either with an internal sensor or with the actual motor that cleans (sucks empty) the Roomba’s canister. Did you check for any stuck debris or cleaned the tower’s internals? Here you can find a written teardown of a tower base....

Chosen Solution Hi I’m Vishwa I kept my S3560 mob for charging longer time by then it is not powering on, I tried hard reset however im unable to power on my mob.. is there any troubleshooting step that i can perform and resolve this issue… Yes this is my problem and i buy 6 original battery. I found same problem with one of my friend on Samsung J1, Need to change Chipset inside i....

Chosen Solution After the replacement of the battery the vibration motor stopped working. Did you repair it yourself or did a shop do it for you? The component is propably damaged and needs to be replaced, If the shop repaired it for you they should replace the broken part.

Chosen Solution hello, quick question. I have a vizio TV model number M65-D0, came into my shop as it would turn off and on, showing the logo, then turning off over and over again, did a diagnosis and it seems to be the power board, however, after waiting for the same model of the power board to arrive, plugging it in and putting the ground screws back in, it continues to do the same thing, has anyone encountered this before?...

Chosen Solution My device Samsung Galaxy A5 (16) mobile phone’s Volume key down button malfunctioned (it wasn’t physically broken), sometimes it would randomly decrease the volume of my phone all the way to silent unless I press the Volume up key. When I restarted the device it got stuck in Safe mode and the volume down key would not work. I sent it for repair to the customer service, but when I received the phone they told me that due to a fault in motherboard my device can’t be fixed (I didn’t have Warranty for a replacement)....

Chosen Solution Hi i want to upgrade my hard drive with SSD. Crucial and wd are the ones i m thinking about. Will those be compatible? Hi, Here’s a video that shows how to replace the HDD with an SSD in your laptop Here’s a link to the supplier’s advisor tool that will help you to find SSDs that are compatible with your laptop Yep! there shouldn’t be any incompatibilities when upgrading your storage drive to an SSD....

Chosen Solution Accidentally washed my Galaxy S5 in washing machine. What do I do now? saperkins01, just like any other device that has been liquid damaged. First thing you want to do is stop using it. Do not turn it on, or try to sync it etc. Disassemble your phone and remove the motherboard. Follow this guide. Then clean every part with 90%+ isopropyl alcohol (unless you have an ultrasonic cleaner) To clean your phone properly, follow this guide....