Posts

Chosen Solution the flex of the screen was damaged and I want to disconnect it to use it with external screen as main, who can tell me which is the central flex of the screen? First alter the display primary screen using the Display preference setting with the external connected. See if you can get things working by using either a USB or Bluetooth keyboard and mouse/trackpad. Then just close the display the system should realize the screen is the external and just use it....

Chosen Solution What is the name of the motherboard in dell mini 9 Hi, Don’t know the answer as there are several variants but you could use the ifixit Dell Inspiron 910 Speaker Replacement guide to access the motherboard to find out what is written on there, either the board number or the Dell part number. If you don’t want to do this you could try entering the laptop’s Dell service number on this website to see if it identifies the board that is already installed in the laptop....

Chosen Solution Does anybody have a good quality display supplier at a resonable prince for this device? It is the same as P2a42 (32G ROM). Hi @ovilu , the best seller of the original parts (according to me) is parts4repair. I don’t know, what does “reasonable price” mean, but I think, the price corresponds to the quality. For a better result, proceed with the following guide.

Chosen Solution After changing the keyboard, the LCD backlight stopped working. I think whoever changer the keyboard didn’t disconnect the battery and popped the fuse in the process. I’m thinking of changing it, but I can’t find it. I’ve tested continuity in some components of the board, but I didn’t find anything wrong This is the first time I use this site, so I don’t know if the images are what or where they’re meant to be, so tell me if something’s wrong Also, if you think the problem is something else, please let me know....

Chosen Solution Dose anyone have any images of teardown of these headphones to do some repairs. Alot of people have had defects with their pair. From the LEDs stop working, low sound coming from the left or right channel of the ear cup speakers, or distorted sound from the cat ear speakers. I bet any help would be better then what is currently out there from a Google search. As I have looked without and real definitive way to fix the problems....

Chosen Solution Where can I obtain a data sheet for the LCD screen only? I need a pin diagram. That is all. If I want to find used parts or new parts with data sheets where do I go to look for them? Here are the full specs on your model: http://www.imei.info/phonedatabase/91927…

Chosen Solution I have a 40 year old Asta stove top tea kettle and the handle falls over, so the wooden part of the handle ends up in the fire. The screws that attach the handle have been tightened, but what looked like rubber washers have broken down with age. What would be able to withstand the heat from a gas burner to replace the “washers” ? Here is a chart to help you determine the inside diameter of washers: https://www....

Chosen Solution What can i do as the left side of my samsung tv is dark @anniemeg could be a backlight, a power board, T-con board or worst case Panel issue We would need to see what you see. Post some good pictures with your QUESTION Adding images to an existing question For now I go with a backlight or T-con board issue but again we need to see what you see to be reasonably sure....

Chosen Solution My battery health shows that it needs service. I was wondering if the battery provided at ifixit.com is compatible with MQAF2B/A model. Hi If ifixit says that it’s compatible with the iPhone X it is Ifixit it really good at mentioning the compatibility of parts so unless they mention it ,it shouldnt be a issue:-) Hopefully this helps Any questions please ask Thanks:-)

Chosen Solution i attached the image of what exactly i think is causing the phone not to charge, but im not 100% sure if that’s the problem. had this phone for YEARS so im sure there might be other things wrong. what can i do to fix this?! That definitely shouldn’t be bent like that, I suppose you can Try very carefully bending it back in place with a very small tool as a solution and see if that works, other than that, completely replacing that connector entirely may be possible, though it is directly connected to the mainboard....

Chosen Solution Is there a replacement part for the seal. The back fell off watch fell off and the seal is ruined. Yes.. go the the manufacturers online page and you can buy a new seal….

Chosen Solution the screw driver seem to rolling in the the tri point screw head and it won’t come off, what can I do Make sure that you use the correct sized tri-point bit. When unscrewing, try putting a bit more downforce to prevent the bit from coming up from the screw as easily. If the screw already is a bit striped, try doing the same with the next bigger sized bit and this may help you....

Chosen Solution i bought a wifi nic card for the xbox one. replaced my old non working card but i still get the “there is a hardware problem” when trying to set my xbox up. i reset the xbox so i dont know if there is a way to bypass the start up screen. I really want this to work. before resetting the console i was able to use ethernet. now i cant use any of it...

Chosen Solution So yesterday I accidentally dropped my mac and after that, the touch bar was not responsive at all, and I check the accessibility settings to only not find any touch bar zoom settings at all. From what I know, it seems like the touch bar was completely disconnected from the system, and does not function anymore. Is there any possible way to fix this problem? (Another thing that keeps happening is that the system crashes after trying to wake up from sleep....

Chosen Solution My iPhone 6 + screen is not responding, if I left it for 2 days there is a chance it works again but after 5hours it ain’t working anymore. I think it’s the touch disease but I don’t see a grey flickering bar at the top of my screen. Can someone confirm it’s the touch disease or it’s something else? I already replaced the screen by a new one but it’s the same problem....

Chosen Solution I followed the iFixit video guide for replacing the old battery on my phone very carefully, and the touch screen no longer registers any input at all. The phone seems to work fine otherwise. I’ve cleaned it out, I’ve checked for damage on the cables, I’ve re-seated the cables a couple of times. The re-insertion of the screen cables felt perfectly clean as well; it’s not like I got a bad angle and bent something or tried to force it....

Chosen Solution Hi guys I have problem with my iPhone 7 touch screen ! It doesn’t Response at all and it seems display has a problem too because it’s filled with lots of small squares in background But homepage can be seen good ! I tried hard reset but it didn’t fix . After I powered up my iPhone in Apple’s logo there was a shadow of battery Percentage ! Did anyone face this problem ever?...

Chosen Solution I tried a couple months ago to upgrade to Catalina, however my MBP rebooted automatically into the firmware password thing. I set it up a long time ago but I forgot it. My MacBook is second hand and I’ve since then been logged in with my iCloud-account. I tried to call Apple Support and explained that my iCloud-account is set-up since I’ve had bought my MBP. However they said without an official recipe they can’t unlock my MBP....

Chosen Solution I have 6 yr old lg 42cs410-tb. I turned it on and a loud pop came from the back with a strong electrical burning. The red light still shows but no pic or sound. I have removed the back and no visible burning. Pics attached. Thanks Not sure where your pictures went….Anyhow this sounds like something on your powerboard went up in smoke. Could be some capacitors but I have seen and smelled failed rectifiers that are doing the same thing....

Chosen Solution Tv stopped working, only the red light comes on and stays solid. Model number is tc-p50x5 @gsparks the very first place to start troubleshooting this will be the power supply. Unplug the set and remove the back cover. Then, without touching anything, do a visual inspection of the board. Check for obvious damaged components like domed or leaking caps. Post some pictures of all of your boards with your question....