Posts

Chosen Solution I want to download new Apps and transfer some Apps already in the phones memory to a SD card. I have a BLU Energy X Plus 2 , When I connect to my lap tops USB port it will make a connection for charging only. If I put it on data transfer the connection is broken. The SD card has been formatted for phone storage but nothing can be transferred to the card and if I download a new App it defaults to the phones storage....

Chosen Solution After 8 months of use, with a physical damage on my part the Dell U2718Q is broken. The warranty is for 12 months, but I accepted that it might not cover physical damages. I asked for paid repair, paid replacement, and even about purchasing original device screen so that I can repair it myself - but Dell said no for all. Now, I’ve found this: https://www.aliexpress.com/item/40000838… but I’m not sure if I should go with this?...

Chosen Solution My camera does not switch on no charge? Have you checked that the battery is fully charged or is still good? If you ruled out a battery issue then check that the terminals on the camera are clean (no build up on the terminals where the battery contacts). You can clean them with a cotton swab and some iso alcohol (wait for it to dry before re-inserting batteries). Also your manual may have some helpful hints Canon Manual 3350 One more note: Some canon cameras have a switch that opens and closes when the battery door opens....

Chosen Solution Can I send my dodgee phone to you for repair? @nashyboy iFixit does not do repair. This is a self help forum where you can get assistance and some guides which may empower you to repair your own device. Let us know what model your Doogee is and we will always try to help a fellow fixer out.

Chosen Solution Hi, im having a problem with an ibm thinkpad a21m, which only turns on if i charge the battery on another thinkpad (same model), if i use the charger nothing happens, btw the charger works fine, its the one i use in the other thinkpad, i wonder what could be happening?, btw all the fuses on the mother were checked and works fine. Any clue or help plz!...

Chosen Solution The icons at the top are doubled and you can see the same text etc directly above the original http://s32.postimg.org/va8dd1t05/2016051… Can be caused by a drop… OR a software problem but I don’t think so

Chosen Solution Not possible! Between the case being very different the logic board is as well. They are very different systems. I would encourage you to review the IFIXIT teardowns here: 13" MacBook Pro with function keys teardown13" MacBook Pro with touch bar teardown The newer 2017 models are exactly the same, just with an upgraded CPU.

Chosen Solution I recently replaced my iPhone screen cause the digitizer in the old one stopped working. The screen was not cracked. Just the digitizer. The button membrane appears intact, and I followed the teardown closely Is there any way to get the button to work? Touch ID not working after screen replacement?

Chosen Solution I recently received a used TV that won’t power on. It’s a Samsung model ln-t4061f. I’ve opened the unit up, and saw that a few capacitors on the board were bad. I replaced them, reinstalled the board, but the television still wouldn’t power on. I then replaced the board entirely with a new purchase from Ebay, but it’s still not working. Is there anything else I can troubleshoot to better identify what the problem might be?...

Chosen Solution If I insert the battery in to lg TV remote control the IR emitter sends a signal, without press any button on the remote control, how can I solve this problem? Hi @ayaya Check if any buttons are stuck down. If not you will have to open the remote and clean the motherboard using Isopropyl Alcohol 99%+ (available from electronics parts stores) as something is shorting out the tracks on the board that the buttons make contact with when pressed....

Chosen Solution We replaced the suspension rods on this washing machine and are still getting uneven loads during the spin cycle. Then I proceeded to clean the washing machine on the allfresh cycle. It still did an uneven load without clothes in the machine. I guess this says it all. “Maytag with a low rate of customer satisfaction and a high rate of failure” Does it spin, or does the error stop it from spinning?...

Chosen Solution My telus (Canada) iPhone 5s has been water damaged and ruined the logic board. I cannot find a telus logic board for it anywhere. Is it possible to buy a logic board from a compatable carrier (ie. AT&T or t-mobile) and unlock it to be used on the telus network? If your in Canada , Im assuming they are using the GSM network, which means any GSM unlocked phone will work including AT&T and T-Mobile....

Chosen Solution i dont know why my USB on zenfone 5 not recognize. Before this, its fine and work properly. My phone brick last month and i fix it. That time my USB(phone) work properly and i can install new sofware but this time. my phone software crash again and i want to debrick again but its fail because of the USB not recognize. I have install all driver needed but still face same problem....

Chosen Solution Looking for some help. The tv will turn on and show the vizio logo but then it immediately turns off. Any ideas? This issue is caused by faulty firmware. this can be resolved by forcing an update (vizio does theirs ota so no go), replacing the eeprom with manual firmware loaded or reflashing the eeprom if still good (requires eeprom reader/writer), or replacing the main board that has all of this already done....

Chosen Solution VIZIO SB2821-D6 remote not responding..did all the trouble shooting..I have extra new remote that will not respond either..factory reset didn’t work.. @shirky since neither one of the remotes works it is possible that the IR board inside the soundbar is no longer functioning. To get to it, you would of course have to take it apart and then find a replacement board or someone that can troubleshoot it since there are no schematics available....

Chosen Solution Since receiving the phone, outgoing calls have been garbled to the person on the other end of the call. The phone was given to me by my girlfriend and she said that she’s never had this issue with the phone. I did a little research, and it appears that the iPhone 6 is notorious for having noise cancellation issues and most of the threads online suggest that I should replace it at an Apple store - which isn’t an option....

Chosen Solution I’d received damaged AirPort Time Capsule A1470. The status light’s 3 electrical wires and 3 pin connector were cut. The only “3 wires” are left inside. I wanna know how those wires connected to the logicboard. Thanks in advance. They connect to the logic board J1700 connector which is just to the right side of the power supply connector. Here’s a good picture of the connectors: Step 4 image from this teardown: AirPort Extreme A1521 Teardown which is it twin without the hard drive....

Chosen Solution So I have a late 2010 MacBook Air. The ssd inside is toast. Burnt toast. Unusable. I’m looking to replace it but first I need to know what type of connector it has. What type of connector is this one? It’s not an M2 or a SATA…. It looks like it might be an apple proprietary one. Can anyone shed some light on the situation and maybe offer up a replacement SSD?...

Chosen Solution Warning light reads “PART TIME”. cturtlepro53 let us know what exact year your GC is. The Part Time warning light lets you know that the Transfer case i slocked. Check your transfer case shifter to see if it is part time or full time. If so, it is possibly a bad sensor which is located on the upper side of the transfer case, next to the selector lever.

Chosen Solution Hi, yesterday I accidentally dropped my cellphone into water, and it stayed in there no more than 1 sec, then I tried to turn it off, but already was turned off itself, or I don’t know what happened, but it did not turn on or off, so I exposed the phone for dry, on the morning I tried to turn it on again, I thought it was already dried, but doesn’t work when tried to turn it on, I put on charger then the screen turned on at 0% battery then turned off, I did it twice and happened the same, so I exposed the phone for drying but it doesn’t turn on, what would have happened and how to solve it?...