Chosen Solution I press power button, everything is normal, then my screen start blinking. At the same time when my screen brightness turns off or blink, keyboard brightness turns off and button brightness. It doesn’t depend on time. It can happen after two minuetes or the screen will be black for 1 minuet. The best part i still can see my desktop and use mouse to shut m y laptop down....
Chosen Solution Toshiba Tv turns on and backlight works but no image on screen not even the tv’s UI, my son was playing xbox and the screen went black about 30 mins in and has not changed ever since even when every device is unplugged, still no images of any kind but the screen does light up. the tv is only a year and a half old at this point....
Chosen Solution The phone in question had an aftermarket LCD assembly including home button installed on it for awhile. I recently found the original screen assembly for the phone, however after switching them out, the touch ID still does not function. The popup saying touch ID can’t be activated has gone away, but i cannot add a new fingerprint to the device. Any ideas? I’m running iOS 10.3.2 and would like to keep it that way if possible....
Chosen Solution Hi, I have Acer Aspire 5732Z laptop. Yesterday I’ve done a fresh Windows 7 64-bits installation on the laptop and everything was running fine and smoothly. But I wanted to update all the possible drivers to make everything more stable. But when the turn came for the touchpad driver, I got the driver from https://www.acer.com/ac/en/ID/content/su...; … firstly I tried the “Synaptics” driver which made my cursor very laggy after installing it....
Chosen Solution Recently I had rediscovered this tablet and decided to use it for work purposes. Not even a day later a friend of mine thought it would be funny to smack the think out of my hand and onto the hard pavement. Miraculously, The only physical damage that could be seen is a slight crack through the left part of the screen itself. However when the actual device itself is turned on the entire left side is simply unresponsive while the right works perfectly fine....
Chosen Solution Why are there two GPU options (HD5670m and HD5750m) for my iMac and which of the two is best to use to replace the stock GPU. (btw which is the stock GPU?) Update (09/08/2021) Thanks again Dan u are a real treasure! The hurdle I’m facing is to not knowing which of the two candidate cards were used by my system Radeon HD 5670 512 MB or Radeon HD 5750 1GB I have a few photos of the card but I can’t tell which one it is...
Chosen Solution What is involved in replacing a damaged UCB-C port on the LG V20? Actually, I could ask a similar question for my iPhone 6S Lightning port. It’s been pointed out that one advantage to “wireless” charging is the reduction of wear on power sockets. With daily use, that would be around 700 plug ins over a two year period, so wonder if this comes up often as an issue, and if so, how to replace a damaged power port....
Chosen Solution trying to find vcc main short with the dc power supply. When I connected the wires to the vcc main line and turn on the dc power supply I cannot go beyond 0.5v with 1.5 current. If anything more it causes shorts with annoying beeping sound. What can be wrong with it? try turning the amps up to 2 and feeling around the board for heat
Chosen Solution I dropped my macbook yesterday. Now my screen only displays all black with white vertical stripes ever 3" or so. Is this permanent damage or do I Just need to try to re-seat a loose connection? The computer is 100% functional when hooked to an external monitor… I’d imagine replacing the screen assembly is not worth the cost of the mac. It could be the LVDS cable or the LCD itself....
Chosen Solution It shuts off randomly with no rhyme or reason as to why. Powering on and off restores the image until it occurs again, usually within an hour. I have done the flashlight test and can see my picture just fine. What steps should I take next as far as repairing this unit as a new television really isn’t in the budget right now. I’m pretty confident in my ability to repair any parts shy of soldering....
Chosen Solution I power the TV on and get bright power LED. Connected receiver turns on as usual (CEC working) then power LED fades to super dim. I opened the back up and haven’t seen any obvious signs of damage (blown caps, etc.) but I did find a “spare” screw laying on the main board down by the inputs. I’m just looking for some ideas as to what to replace first....
Chosen Solution Spilled clear water on macbook pro keyboard and dried it out over three days. Unhooked the battery as it was trying to cycle on and off everytime i opened the lid. So i have battery unhooked and back open and drying upside down for three days. Is it safe to leave the battery unhooked an plug into wall to test? Or should I plug the battery cable back in to test?...
Chosen Solution unfortunately i didn’t close my water bottle, so some water pervades into the phone. The indicator is now rose. What should i do? Victoria, the first thing I would do is to remove your battery. After that you do want to disassemble your phone and clean it with some high grade isopropyl alcohol. That will displace all the water that may have accumulate on the inside of your phone....
Chosen Solution I dropped my phone on the kitchen floor (i.e. hard slate tile) and although the phone seems to be working, the screen is not displaying anything. Could I get away with just replacing the screen? or would that not fix the phone since the glass is intact? I’m a total newb at this sort of thing, so go easy :) It’s hard to say whether replacing the screen will fix it....
Chosen Solution Every time the car is started, mainly when it’s cold it makes a loud rattling noise for a while and then if you rev up the motor it tends to go away.i changed the tensioner pulley thinking that would solve it but no luck. Please anyone have same issue help!! And it’s not low on oil already thought that. 2006 Suzuki Forenza My toyota lj70 with 1kzt 3.0 engine also does that and it s also the blue smoke coming from the exhaust....
Chosen Solution Based on a lot of research, my iMac was suffering from the vertical lines hardware display issue and I found a place on eBay that replaced broken GPUs. After replacing my video card the screen is still black. I see the backlight come on during boot and I can control the computer, play music via keyboard shortcuts etc, but no images display, no boot apple logo, etc. I’ve checked the cables like 10 times and rebooted this thing so many times....
Chosen Solution i have a samsung grand 2 ,when charging volt is 1.65-2.35v is blinking then ,i was change its charging usb socket after that my phone gone dead and no reasponce any but still charging voltage is blinking on battery connector when connect it with charger but not show charging and not turn on my phone ? how to solve this problem ? please help me any one its urgent ....
Chosen Solution Okay so when I turn my laptop on I can hear everything starting to work then they are fully working but my screen will only show white. I found out it’s the password page but I see white no matter what. I hooked up a external monitor, entered my password and I was in my laptop, I could only see it on my monitor. I can’t do anything because all my applications open on my lap top cuz my thing is set to expand....
Chosen Solution When I plug in my ipad to any of the outlets in my house it says not charging, but if I leave it alone for a while it gets power but it takes forever. If you are running a Mac or have a friend with one, you can run Coconut Battery when it is plugged in and get detailed information on the battery status. https://www.coconut-flavour.com/coconutb… Hello @dannnnny If you have not already try getting a plug with 5 volts and 2 amps - 2....
Chosen Solution My A1-840 screen suddenly stop working. When I push power on button, the screen brigths slighgly from the border but nothing appear on it. I connected the hdmi cable to a LED TV and verified that software is working OK and the touch control is also working. How could I determine whats wrong?. Is the digitizer or is the screen?. The screen seems phisically undamaged. i have the same problem
