Posts

Chosen Solution Hi! I have a frigidaire CFLE 1011MW1 washer/dryer combo and while the water fills up, it won’t drain. It happened after I heard a strange whirring sound and it continued to wash. It’s built into the walk in closet so I’m not sure what I can do. Solution 1: Drain Pump Sometimes, small objects or articles of clothing can get caught in the drain pump. To determine if anything is blocking the drain pump, remove the drain pump and check the pump for obstructions....

Chosen Solution My Son had a tumble while carrying a backpack containing of all things 1 litre of juice, and his iPhone 4 A1332 model. Due to the backpack being waterproof, and the bottle of juice getting smashed the iPhone was left submerged for a few minutes while we sorted him out. I stripped the back from the phone, disconnected the battery and left it to dry. I got a thirsty bag on order and never touched the phone for 2 weeks....

Chosen Solution My sister dropped her iPhone 5s in the water for about 2~5 seconds and immediately took it off. I don’t know if she turned the phone off (or if it was still working) and I can’t ask her right now because se is travelling. I opened it and tested the battery in the multimeter and it read out 3v so i assumed that the battery is ok. I also claned it the whole board with a kind of alcohol (the seller said it is made to clean PCB) and a tooth brush....

Chosen Solution Dear friends, My MBP got what I consider a minor water intake. I went to de Apple Store and you know the story it was not covered. My MBP turns only with the charger plugged in but not with the battery itself. It also does not charge. I hope to hear from you soon. JL Contact your insurance agent and see what your deductible is. Before you destroy it trying to fix it yourself know that water damage can be the most difficult thing to diagnose....

Chosen Solution I have late 2015 macbook that have water in keyboard! It was working after I cleaned the keyboard with tissue and I close the laptop The next day i try to turn on but nothing happens and i try to charge it and nothing happen ! What should i do ? What could be the problem? Can i fix it ? I have yet to see a liquid damaged keyboard (that has shorted out and refuses to start) be repaired by cleaning with anything....

Chosen Solution Hey everyone, I ordered a Lenovo Ideapad Gaming 3 a couple of weeks ago, and it arrived last week. I’ve been wanting to upgrade the RAM to 16GB, so I decided to open it up for the first time. I’ve never opened a laptop before, and I did not open it successfully. The areas with the hinges were giving me a hard time so I told myself that I would open it later in the day....

Chosen Solution The contact point (bent over piece of metal with copper ball) just above and to the right of the black wire cable came off of the mainboard. What does this do and how should it be reattached? It contacts plastic on the board frame so I can’t understand what it does. Is it just a spacer?

Chosen Solution Hi, I mean the length, width and diagonal of the screen of Apple Watch Ultra. Thanks. this is the specs i seem to find as google will show you if you search, 49 x 44 x 14.4 mm

Chosen Solution In an effort to clean my logic board, I managed to tear the connector that connects TO the touch bar cable on the Macbook Pro A1706. I couldn’t simply replace the touch bar cable as this isn’t the problem. It’s the cable that connects to the touch bar cable. Could someone tell me what part I require in order to replace this? Sorry to say Apple does not offer a replacement cable or even the touch bar....

Chosen Solution hi my dell lazer printer has a error 009-654 contact custom support? I had this error on my Dell C1760nw, i had been trying to fix why it was printing light grey instead of black and after cleaning sensors in back and reseating toners and updating firmware and uninstalling etc i got fed up and used the old faithful. Tipped it on its side so the toners were at the top the picked it up about 2 inches and dropped it a couple of times, turned it on it made a lot of grumbling noise but you know what it cleared the error code and made it print in black again might sound daft but i think there was a blockage and it cleared it...

Chosen Solution The question as you see in the title, So what’s the difference You should not shock the item you are working on if you use (Electrostatic Discharge) ESD gloves, you should not leave dust behind in the item you are working on if you use dust free gloves.

Chosen Solution The night vision appears cloudy, what can I do to fix it? Lights Are Reflecting You may have to re-situate the position of the camera if the lights are reflecting. Re-situate it and then aim the camera the correct way.

Chosen Solution my phone is not booting up,what will be cost for motherboard replacement from third party, i dont want to go to nokia service center, they will charge very huge amount, can anyone tell me where can i get lumia 1020 motherboard replacement nielrajput there is no standard price. I’d suggest to use your favorite search engine and scour the internet. Ask proper question to any vendor about the condition of the board and any warranty since you are most likely going to get used boards only....

Chosen Solution So I replaced the terminal and then I reconnected the battery and the horn start blowing it were not turn off like an alarm or something so I had to disconnect the battery again but it won’t turn over or nothing not worn even light of the dashboard or anything but could be is in a shut off switch and alarm switch or something You may have triggered the alarm system when you disconnected the battery....

Chosen Solution So recently I replaced my phone screen everything is working fine… the only thing that’s wrong is on the bottom of the screen when you push down (not hard whatsoever) it’ll show a bunch a different colors and what appears to be the small box under it…. I’m pretty sure I put the phone in right and the screws and everything is tight.. even got a new screen thinking it might be a defect… so what am I doing wrong?...

Chosen Solution Techno c8 only charges with a particular charger. Have tried different chargers at stores but it won’t charge. It just stays at the same percentage. So I’m worried is it a motherboard problem ? And if so how do I go about it. Could it be broken contacts? A guide on troubleshooting and repairing such related problems would be welcome. Also , there’s a caveat. Why is it that the phone charges well with just that one particular charger but rejects all other chargers twice as powerful ?...

Chosen Solution Hello A friend gave me a GB classic in a very good condition. At least from an oustide point of view: not yellowed, no scratch on the screen, etc.. The only problem is that the direction is down so I decided to fix it and opened the GB by thinking that it was only a contact issue But no.. I noticed that the logic board was a little “broken and splitted” in the area of the direction pad circuit....

Chosen Solution Hi. I have the Afterglow PDP AGU.1S. On the microphone part, the blue light is flashing, and when I go to the support site for the headset it tells me to download and install new firmware onto the headset. The tool however told me that the firmware is corrupt, and I have now sent two tickets to the support team over the last five days without any viable fixes....

Chosen Solution Hi, I have a LG that has been broken for a while so we switched it out. Now we are debating to fix it to sell it. But I am not sure if it is worth it. It has the freezer on the bottom and it thaws making huge puddles of water on my floor. Then it refreezes. There is always a huge layer (like 1/2 in + thick) of ice at the bottom of the freezer....

Chosen Solution The tone arm seems too lightweight and skips and skates over my records. The turntable does not spin at an even rate. I am not referring to pitch control. I can clearly hear that the record is not playing evenly. sounds as if your anti skate needs adjustment, it should be almost the same as the counter weight adjustment , Also your belt should be replaced or if you have a direct drive it may be the motor speed adjustment or motor is malfunctioning there are manuals available on line...