Chosen Solution hi I have changed a screen on a iPhone XR, have used the supplier and XR screens before and never had a problem. the phone was working fine, then after 4 days the customer turned the phone off and then touch stopped working. I did a force restart and the touch works fine, once the phone is turned off the touch stops responding again. a force restart and it works fine again....
Chosen Solution I have a BCL14181H battery charger (Ryobi) that does not charge. No blown parts. I am having trouble identifying components. Does anyone know the component number for U5? It is a 20 pin SMD chip. Also there are some components that look like an SMD resistor but appear to be jumpers. they are labeled RJ1, etc. Component U4 has what looks like T8L05 stamped on it. Anyone have an idea what it is?...
Chosen Solution Heard loud sharp pop, screen went completely dead. Cannot turn on, no lights no sound. Waited then cracked the back. Can see obvious damage as shown in photos. I cannot locate a blown fuse. I do have a multimeter available I do not know what the burned looking items are, how to remove them (other than with pliers?) or where to get them to replace them. Please help! Thank you in advance!...
Chosen Solution So I was watching my tv and hit the Netflix button on the remote and my tv shut off and a red light in the corner started blinking. I turned it off and back on and it will sound like it is about to turn on but and the screen flickers but then it shuts down again and goes back to the blinking red light. I have tried holding the power button for 60seconds on and off with no success as well as the power button with the volume button....
Chosen Solution Hi, I have a iMac 27” (Late 2012) model, but screen cracked. Don’t want to invest in the whole LCD unit replacement which can’t be reused down the road. So I want take the internals out and put it in a separate PC case, and connect it to a separate monitor. I went online and did some research and found that, this might be possible, but the main issue is the LCD thermal sensor....
Chosen Solution Hello friends, I have vertical dash lines on the screen and stuck on the loading screen. Those lines are present in any process that I’m doing like rest SMC, install windows or Linux. Also I changed the screen but still they are here, Also they are present in external monitor. I don’t know what is this?? @armin1 those are originating from the GPU. The issue here is that your are having a processor issues....
Chosen Solution My Vizio m422i-b1 42inch HDTV has starting having an issue with pixelated horizontal lines that will appear on screen in random spurts. I first noticed it about a week ago and then it would only flash the lines for a few seconds before the TV resumes as normal so I thought nothing of it. Now though the lines will last for a few minutes at a time before stopping and the TV will resume normal picture quality....
Chosen Solution on permanent press cycle halfway between 4 and rinse, small load. what could be the problem. it seemed to attempt to start again, but only ran about 5 seconds. 22 year old kenmore Update (03/30/2022) this is about where the washer stopped. i tried to run it in a different cycle, but moved it back Hi, Here’s a link that shows where the drive belt is for the washer....
Chosen Solution When the screen is replaced, the water proof still working in my apple watch? who can guarantee that? Once the seal is broken, I would not be confident that it is water tight like it is from the factory. According to Apple the series 3 watch is hermetically sealed, which means it’s airtight. Even with proper adhesive and what we may feel is a tight seal, I wouldn’t trust it....
Chosen Solution Hello, all. Sorry, I’m a bit stumped and frustrated. I manage to find one site with the issue I am having but I don’t think it’s 100% what I’m having. See, earlier the Passport was doing just fine. Now? Any time I have it plugged into the PC, everything is extremely slow and constantly loading. Really, I have work related stuff in my PC. Had this since… maybe 2016?...
Chosen Solution Hi I have a Westinghouse roku TV that I bought a few months ago. Today it just randomly went to a black and white screen. Kind of like black and white vertical boxes. I turned it off then on and it was completely black, then after a few seconds it turned like a dirty black and white with no distinctive pattern then after about a minute or so it makes the vertical boxes again with black vertical boxes on the left and white ones on the right....
Chosen Solution I recently received several important messages that came to me in Outlook. I almost immediately found out about it and clicked on one of the letters. But unexpectedly for me there was an error unknown to me because of which, I can not see the text of the letter. I’ve repeatedly tried to check the system block for viruses, but in my problem this did not lead to anything....
Chosen Solution is it ok when sheets came up blurry and double-shoted It sounds like there might be a ‘double exposure’ setting on this camera. Try to find information about “double exposure” in the owner’s manual.
Chosen Solution I am moving my legion t530-28icb to a new chassi. But when I look on the motherboard I can figure it where power, reset, led and hdd led goes. I now sort of what clusters of pins, but I don’t know what pin is minus or plus or whatever. The board doesn’t say. Hi, Which header pins do you mean? If it is for a fan or a LED light, then if they’re reversed, for a fan it will run in the reverse direction (or not at all) so maybe sucking air in rather than blowing air out and if a LED light then it won’t turn on Here’s the hardware maintenance manual that shows what and where all the motherboard connections are, although admittedly not how to correctly connect to them....
Chosen Solution purple, pink, blue, and brown tint growing from one side of screen Looks like LCD damage from a blunt object. for example hitting something while the phone is in your pocket. repair guide is here Samsung J7 Pro LCD Display Replacement
Chosen Solution This machine (model # 110.47088 600) will not light up at all to make a wash selection. There is a “ringing” sound when the power button is pushed, …but no other indication this thing has any life in it. boloto download the service model from the bottom of this page. Kenmore Elite HE3 Washing Machine Repair. Follow the troubleshooting procedure on page 39 and on. It is possible that you are having an issues with the control board....
Chosen Solution when power is off on tablet then the charger gets plugged into it the screen appears on then off then on then off over and over again until the charger is unplugged but also the tablet wont turn on at all…why Hey Jenifer, perhaps the battery is dead/dying. How old is the tablet? I am not sure how technically minded you are but these batteries are really cheap but will require a certain amount of skill to open the tablet and desolder the old battery from the board....
Chosen Solution Has anyone here tried to temporarily repair a laptop touchscreen crack with LOCA glue, epoxy or other? I don’t want to replace the screen just yet and so I am looking for a temporary solution to stop the crack getting worse. It’s a thin crack from the corner, the display is fine and only the glass is affected. I have add some Glue on an old cubot p9 and yes, it stops the glass cracking to expand and keep the glass in place, but be sure that you will not glue the interior LCD while trying to glue the Digitizer....
Chosen Solution Hey All ok i have an iPhone X and i restored the the phone to 12.1 since then i can not activate the phone. Find my iPhone has been switch off before i don’t the restore its off on the system and its unlock to any network. i have Dfu restored also with recovery on countable times when i connect to wifi to active i get the error “Your Phone could not be activated because the activation several is temporary down” connect throw iTunes i get the error “THE iPhone could not be activated because the activation information could not be obtained from the device....
Chosen Solution I bought a 16 gb meomery cars I put it in to my tablet it didn’t read it. Did you put the card in the SIM tray or the mSD tray? It should be in the mSD tray to work. If it is new you might want to plug it into a pc and see if it is recognized, if so format it and plug in back into the tablet and see if it is found....
