Posts

Chosen Solution So my pixel doesn’t seem to play audio from the speakers, including the ringer. Although it also doesn’t play any videos on YouTube, instagram or Snapchat so I’m not sure if it’s a software issue? Weird thing is that from time to time it works and works with Bluetooth headphones (headphone jack is broken). Is it because it is trying to direct the audio to the headphone jack? But that doesn’t explain why it doesn’t play videos?...

Chosen Solution Just as the title says, my volume button is stuck in the up position. This means I cannot power up my phone without it going into fastboot mode, thus rendering my phone useless. I did not bump or hit the phone prior to this, my phone was just in my pocket the whole day. Any ideas on the fix? I have the same issue! I must have bumped my phone against a surface at some point and now the volume button is permanently pressed....

Chosen Solution Hello , I have a spare iphone 6 can i replace my wobbly parts and use the ones from iPhone 6 in my 6S? thanks Hi Antonín , You should be able to if you take a look here you should be able to find a guide to help you. Hopefully this helps.

Chosen Solution I have a small portable Vornado Heater that was making a noise every once in awhile when I had it on. I tapped it, and the noise went away - thought maybe paper or something was stuck in it, but then it quit running all together. I have power going to it, but appears the fan is not spinning? Is there a way to take the device apart and fix the fan?...

Chosen Solution My Macbook Pro, late 2011, started to overheat and go to sleep mode. So i decided to renew the thermal paste. After disassembling and renewing thermal paste, i reassembled it back and turned it on. Some additional information at this point. I was using this notebook with bootcamp. In order to work around the UEFI boot problem, i installed rEFIt earlier. Therefore i used to press alt-key at startup and choose which OS i wanted to boot in....

Chosen Solution How do i fix error 0x07674dd6? HP has removed all of the support information for your printer from their website. But whenever I search on this error code, I get information about an ink cartridge problem. Check this site: https://support.hp.com/us-en/document/c0… Perhaps it will be helpful for you. Apparently this is a really old printer. Have you considered getting a new one? You can get an HP or Canon all-in-one printer at Walmart....

Chosen Solution i gave my phone to someone to use it and he put the sim lock but he forgot it now. now the only way to remove the sim lock is to reset the phone itself but i do not know the phone password. i put a phone lock on ma Samsung GT-E1205y but can’t remember my gt - e 1205y phone locked Take out the SIM and try the following: #*7728# #27672878# *# #99983855# Note that this may reset your phone and wipe your data....

Chosen Solution What’s this cable for? I accidentally separated the black cable from a metal plate that’s sticking to the screen, i tried to pry the cable but my pry tool somehow went in between the plate and the cable causing a portion of it separating, will this affect my touch id? And is this plate important? Or just a plate to keep the ribbon cable down? Update (10/07/2019) This is the exact plate, the corner is slightly separated from the ribbon cable, it’s not torn or anything, the adhesive is just loose....

Chosen Solution What size of tap used to clean headbolt threads on the 4.6moror === === Windy Martinez just for completion sake. The thread size is M11x1.5 2004 and after uses a M11x2.0 One other point. You really shouldn’t clean bolt holes with taps. The problem is taps can cut and damage threads. There are clean-out taps that are made specifically to clean threads. Much better option. They usually come in a kit that will cover both metric and standard sizes....

Chosen Solution my headphone jack got bent because it was sticking out like a sore thumb You can try to replace it or possibly find a universal replacement jack. If that doesn’t work it sounds like you might have to replace the headset.

Chosen Solution When powering on my vu 32 inch full hd led TV (model- 32d6545) backlight flashes only once and thereafter the screen goes black with sound only. I checked the voltage on led supply pin. When I power on the TV and the “VU” logo appears, the voltage is 76 volts but just after that the logo dissappears and voltage drops to 44 volts. What is the reason? Ajay Kumar Tiwari since you still show power on the LED lines when it turns off it does sound like an issue with either the main board or the power board....

Chosen Solution How do I get a charger for my creative Zen m 60 GB Hi @dre1 Here’s a link to the charger cable that may help. All you need to do is to plug it into a compatible USB port on any computer or some mobile phones also have chargers/adapters (example only) that you can plug/unplug the cable into.

Chosen Solution where is the fuel rest button located on a pontiac 2004 grand am car @dedree , There is (NO) fuel reset/shut off switch or button on your 2004 Grand Am. There will be fuel pump fuse/relay(link for your manual below, fuses/relay locations). If fuses all good, relay good, and you are certain the pump does not come on, the pump only runs for a few seconds to build pressure unless the engine runs....

Chosen Solution Just moved the TV and I do remember ignorantly grabbing it in the car and pulling it with the top bezel ?. Is this possibly a light diffusing sheet that just needs to be readjusted? It looks like instead of rolling over the sides this top part of the TV is coming out flat against the TV as if it is getting pinched by something, I’m not sure. It’s only NOT visible straight on or in dark scenes....

Chosen Solution I have been experiencing very intermittent bluetooth connectivity (most notable with audio connections) over the last couple of weeks on my 2019 iMac 27”. As my computer is connected to my network using ethernet, WiFi connectivity isn’t something I’ve been concerned about. What I need advise/suggestions on are: best way to check the Airport/Bluetook card to see if it needs replacementis the Airport/Bluetooth card in the 2019 iMac 27” the same as the previous version of the iMac....

Chosen Solution Hi, After updating my iphone 5s to iOS 10.2 stopped [123] key on the keyboard stopped working. I tried “reset all settings” and restarted the iPhone few times, but nothing worked! Any idea on how I can get that fixed? Any help would be appreciated. CS First confirm whether this is a hardware or software problem. Take note of the physical spot where that key appears on your screen, then launch several apps and see if that specific physical spot recognizes your touch in those apps....

Chosen Solution I gotta carpet piece tangled in it and when I got it loose I noticed the brush isn’t spinning anymore. I cleaned everything out but it still isn’t working, is there a drive belt for the brush head? If your Dyson Ball Animal vacuum cleaner is no longer sucking up dirt, dust, and debris when using the standing vacuum, see the Dyson Ball Animal Has Loss Of Suction problem page for possible problems and solutions....

Chosen Solution The cold water does not shut off when filled thus overflowing. Hot water does shut off. What is the problem? Cause 1 Water Inlet Valve Try shutting off power to the washer while the machine is filling with water. If the washer continues to fill with water even when it is not getting power, this indicates that the water inlet valve is defective. If the water inlet valve is defective, replace it....

Chosen Solution why my toshiba not holding a charge and wont power on .i replaced every thing I’m having a similar problem with my u500. It was over heating. Note it just stopped working. Why are there no answers at all. A clue at least? Nothing…..

Chosen Solution My 5s was run over so i purchased a locked iphone and swapped my original logic board and home button to the new phone. The home button works but not touch id. I get the unable to use touchid message. What could be the issue? Make sure they are the same pair, if they are, hard reset, if still nothing, you must have torn something. The iPhones Touch ID is linked to the original logic board it came with, Maybe during repair your may have bent a pin or cable, this is very unlikely since it works....