Chosen Solution I am fairly new to ds repair so I can sometimes do more damage than fix and I broke off the vr2 screw thing. (picture below) https://imgur.com/a/e12xHDk Professor Smartie that “screw thing’ is actually a Variable Resistor. Some people also call the (Trim) Pot for Trimmer Potentiometer. Your DS Lite should have two of those. VR1 is for the upper display and VR2 for the lower display with touch....
Chosen Solution The back of my watch keeps falling off. Looks like it was held together with some sort of adhesive. It appears to be a compression fitting. See if you can find someone with strong hands and thumbs to press it into place.
Chosen Solution Pin has com apart from strap on my fitbit Hi, It seems like you can either replace the pin (supplier example only) or replace the band for your watch. Just search for Fitbit Versa (insert band or pin) to find suppliers that suit you Here’s a link that shows how to replace the band which may help.
Chosen Solution Hello ! I have a Samsung galaxy S7 edge . The digitizer stopped working a week back . I took it to the service centre , got the front LCD replaced ( as digitizer is a part of the screen ) under warranty. On the way back home , the touch panel has developed cracks , however there is no distortion , black spots or dead pixel on the LCD, can I replace the touch panel under warranty ?...
Chosen Solution To the far right and far left side of screen and functioning. I did touch both sides of the keyboard parts and swipe together as one whole original keyboard. Now the keyboard has positioned about 1" above the bottom of the screen? If I’m not mistaken dragging the 2 key boards together should fix the problem, let me know if it worked
Chosen Solution Touch on my iPhone 6 plus was glitching so I purchased and replaced it with the iPhone 6 Plus LCD Screen and Digitizer Full Assembly from iFixit. After restart, touch works and I am able to enter the pass code and use the phone. After few minutes, touch becomes totally unresponsive. Have tried to remove and reinstall, hard boot, and even restored the phone but no luck. Any ideas?...
Chosen Solution Was having power cycling issue. Now it will not turn on. It will power on with the x main board unplugged. is it safe to assume the x main board needs replaced? look for blown capacitor. they should look bulging at the top.
Chosen Solution Tried unplugging & using a different socket Changed remote batteries. Reset remote. Tested remote and it is working (IR flashes when press) There is power to the TV. The red standby light is on still, not flashing. But TV will not turn on or show any picture. Tried controlling from TV also. Red light flashes when press buttons but no picture or sound no external devices. please help - I’m working from home & my kids are climbing the walls on Inset day!...
Chosen Solution How can I upgrade my first generation ipad to iso10? You don’t. You have to buy another iPad. Even if it’s possible you will have a very slow iPad that would crash a lot due to very obsolete hardware inside the iPad. The space in the iPad is probably the bigger issue like only 8GB. You cannot. iOS 10 is a 64-bit operating system. iPad 1 is only 32-bit Even if you managed to get it on the iPad, the processor with 256mb of RAM is too slow....
Chosen Solution When the exchange of USIM card connector USIM recognition possible? Then, is it possible to replace the USIM card connector? It’s possible to replace the SIM card connector, but need to be very professional because it’s soldered on the motherboard and you need to disassemble the phone. Before replace the SIM card connector, i suggest that Clean the SIM card. Try the SIM card in other phones to see if it’s well....
Chosen Solution My watch isn’t turning on, how much does it cost to fix it? Does it turn on while on the dock? Is it just showing the white Samsung Logo? I have my watch on the dock but nothing is coming on My watch doesn’t turn on no more
Chosen Solution Hi, i recently bought a joblot of old macbooks and iphones, included was this macbook pro mid 2012, i have opened it up and it seems very apparent its water damage that is the problem with this mac. i am wondering what would you guys reccomend me do next, would submerging it in isopropyl help the case or is it already too late for this machine, thanks Unfortunately with the extent of visible damage to that board (not even seeing the other side), it would need extensive low level board repairs....
Chosen Solution just replaced water filter and still not working. I unplug the power cord, plug it back in and water duspenser works for about 1 minute, then nothing again sounds like a rectifier or a diverter prob check ur relays if one of them is shutting off
Chosen Solution Kenmore Elite model NO. 596 75523400 Problem started from yesterday, during afternoon it trips the breaker. We’re not sure what happened. When I turn the switch on the breaker back to “ON”, (it has it’s own breaker in our breaker box) it started working, but very different from before. I feel it can still cool down a little bit, but now much. The humming sound from the compressor is different, not so powerful, and doesn’t last long enough each time....
Chosen Solution I have a Series 3 with a busted screen. The watch turns on, but no longer responds to touch commands. What exactly do I need to replace to get my watch working again? As in the outside glass? Or the digitizer? I have all the tools I need to do this, I just need to know what exact part I need to order!! Tia! You need a complete display assembly, here’s the needed part, make sure you sleet the correct one!...
Chosen Solution I have the 6TB version of the drive linked below: https://www.amazon.com/dp/B01JHN5BZE/ref… I assume that since it’s available in a 10 TB capacity I should have no issues opening it up and installing a 10 TB drive? Has anyone installed a larger drive? I may go up to 12 TB if possible. If this is the correct model https://shop.westerndigital.com/en-gb/pr… it goes up to 14TB. You may need a bios update but this is unclear....
Chosen Solution Hey guys , there’s this bracket near the bottom of the iPhone XS Max, with like four wishbone thingys that have corresponding gold areas on the screen- what is this bracket called and what does it do? One of the connectors came off during screen repair, and the phone still seems to be functioning fine see item removed on attached image The bracket has some kind of RF isolation purpose apart from just holding stuff in place, the signal may degrade a little bit but not significant....
Chosen Solution Hello, I Noticed the other day on my Kenmore dishwasher that there was some standing water in the bottom after the cycle is done. When I hit the cancel/drain button Instead of draining the water, more water started to come in like it was starting a new wash cycle. The old water is not draining, I cannot start a new cycle to get the standing water out. I pulled the bottom apart and can’t find any blockages....
Chosen Solution No trigger is not sticking now & again it might go on & off again It looks like the light is powered at the same time as the motor. therefore the fault is the motor itself. It is possibly the brushes. There is a slim chance that you could repair the actual motor (it is not a serviceable part) depending on the fault otherwise you will have to replace it....
Chosen Solution Hi all. This is yet another version of this “popular” issue. So, here’s the thing. I have the Apple product dongle and cable between the two (thunderBolt 3 to Thunderbolt2 conversion). I reset SMC and reboot. Cmmand-F2 works the first time. If I Command-F2 is pressed again to stop Target Display Mode that works too. From then on, if Command-F2 is pressed the iMac display is barely visible with no way to increase brightness....
