Chosen Solution Some of the teeth in the port broke off and it doesn’t allow the tablet to charge. Is it possible to replace that part in the tablet or will I have to buy a completely new tablet? depending on the make and model of your machine replacements can be bought from most tech stores and also ebay. see this link as an example: http://www.ebay.co.uk/bhp/micro-usb-port a search can be made if the specifics are known....
Chosen Solution I have water damage and Canon did not want to touch it. Camera works fine other than light sensor not working properly. try here lisa, http://www.londoncameracentre.com/camera…
Chosen Solution My display cord is disconnecting and reconnecting it happens every 1-5 minutes and goes dark for about 30 seconds every time I’m pretty sure it is my display cable every time it disconnects it says it is disconnected on the oculus app. Best advice I can give is to remove the part of the headset your face rests against (it just pulls out and snaps back in), and removing the cable and putting it back in....
Chosen Solution My son dropped the camera on our hardwood floor and cracked the LCD screen on the rear of the device. It seems like the camera still works ok but it’s hard to see the screen. What can I do to make this better? It seems like a waste to replace the camera since it works fine but looks broken. It’s likely that the plastic screen that protects the LCD Panel is cracked....
Chosen Solution I dropped my instax mini 8 and now the lights on the settings keep changing. I was in my room and the light should have been telling me to use the house setting but it kept changing to the other settings. I was wondering if there is any way to fix it so that my camera tells me the correct setting to use. If not, any tips on which settings to use and when would be useful....
Chosen Solution The top part of my speaker has come off so I lost it… do you sell this part ? Unfortunately, iFixit does not sell the part. In fact, I am having trouble finding the front cap anywhere else too. :-(
Chosen Solution an error occured while creating the backup folder The file system on most USB external HDD’s is some form of FAT or NTFS and may not be supported by the time machine software. I ran into a similar compatibility issue a while back using a time machine style backup software (back in time) on a linux system. These style systems rely heavily on symbolic links to do the magic they do....
Chosen Solution The touch bar on my macbook pro recently started flashing a white rectangle next to the power button. It does not do it whenever the touch bar display is on, but starts randomly flashing whenever the display is off. Found a video of someone else with the issue here: https://forums.macrumors.com/threads/tou… Looking on forums, Apple’s solution seems to be replacing the entire upper case assembly and sometimes the logic board....
Chosen Solution I just replaced the screen and it was working fine, but i kept opening up the phone to try and fix a problem with the proximity sensor, but now I have a new problem. Watch the video. Also, can anyone help me with the proximity sensor? I can’t get the screen to turn off when I put it up against my face. I’ve already scraped out some of the circle so that there’s no chance of it being to dark....
Chosen Solution Truck want start or crank Hi @kam2714 Just confirming that you checked that the battery/battery connections are OK e.g. lights work, horn etc? Here’s an image of the starting wiring diagram from the 2005-2005 Durango service manual, that will help you to find out why it’s not starting. (click on image to enlarge, then click on the image again to enlarge it further)
Chosen Solution So I have these two drives: a 1GB IBM DPES 31080S. It’s marked with the Apple logo and it was the (perfectly working) internal drive of a 7500/100. I use it now as an external drive. SCSI ID is correctly set on both drive and case. It’s formatted as Standard since I’d like to use it on an older LC III and install an OS 7.1 or 7.5. Fact is, it won’t auto mount on the 7500, and it won’t even get recognized on the LC III, thus preventing any installation....
Chosen Solution Hello dear comunity, I’m from Europe and I made an exchange las Spring semester when I adquired a second hand Sprint Iphone 5 16 Gb (not robbed or stolen). The fact is that I wasn’t able to find out how can I unlock it here in europe and it’s a pitty because I changed the front panell (it was broken) and now it’s like new but still locked. I think you are the only ones who can answer me or give some tips to fix it....
Chosen Solution Long story short, I had a very similar incident as described here: My iMacs Display Screen Fell down! I had used tape in all 4 corners of the display to temporally attach it to the iMac case, but due to the heat in my home office (no AC) the adhesive must have failed. One morning I woke up and found the top two corners of tape have become removed and my display was just being held on by one of the cable connectors....
Chosen Solution My son 32in flate screen tv. Volume was working and then the next day. It quit you can hear it a little but you can not turn it up are down. On the satellite remote it was working and like I said it quite you can change the channel but no luck on the volume. On his tv you can’t even get it to turn up. Do please what can I do with out having to buy a new one...
Chosen Solution My washer doesn’t drain completely. I anticipate that the drainage system may be clogged with a sock or something. How do I get to the item to remove it? Jamar, If your Kenmore 110 Series Washing Machine is not draining after a wash cycle, see the Kenmore 110 Series Washing Machine Won’t Drain problem page for possible causes and solutions. remove the water pump. Here is the guide for it....
Chosen Solution Kenmore top-loader 110.20022014, likely made about 2010. Has been working well for years. Goes through Wash cycle OK and spins. Now fills to Rinse and then immediately empties without agitation, then spins. My well water psi is 20-40. I unplugged the washer and cleaned the washer entry screens… problem not fixed. I’ve read about a diagnostic and recalibration procedure but have not tried that yet. I am hoping it is not the electronic board replaceable for $250+....
Chosen Solution My washer makes a loud banging noise in the spin cycle. Also it is throwing rubber like stuff. Cause 1 Rear Drum with Bearing The rear drum has a bearing or bearings in it to keep the inner tub spinning smoothly. If the tub bearing system is defective the washer can become very noisy. On some machines bearings are sold separately from the rear drum, however we recommend replacing both the outer drum and bearing as an assembly if the manufacturer offers the components together because removing and pressing in the new bearing can be exceptionally difficult....
Chosen Solution After spilling water onto my mac’s keyboard, i instantly tried drying the top of the keyboard, straight after i tried to see if anything was damaged, to my surprise, everything was working fine, but as i went to a video of such, there was no sound so i thought it might have just been a bug, i tried the siri on my laptop, but yet again, no sound came out....
Chosen Solution Hi My hd has smart errors so needs replacing. Its a late 2009 iMac i7. Do you recommend upgrading to SSD ? where can I find list of compatible drives? Thanks Here’s a list of the drive options for your machine: Make sure that your machine is the late 2009 first! https://eshop.macsales.com/upgrades/imac…
Chosen Solution When y push the clean button it said error 14 and don’t work. Error 14 means Roomba is not detecting the bin. Try wiping the metal connectors on the bin and on the vacuum. Hope that works! Have a great day!
