Posts

Chosen Solution I have a customer who brought her water damaged iPhone 6 in for cleaning. The phone is completely dry after setting on pads over night. I have connected a battery and new screen however, the digitizer is not functioning. The main goal is to recover her data since she has photos of her father that passed away. I have tried to think of alternatives to recover her data. My biggest problem is that the phone is locked with a pass code....

Chosen Solution Hi, a while ago I discovered my broken iPhone 11 in a drawer. I didn’t repair it because I bought a new one right away and somehow forgot about it. Now I figured this is the perfect opportunity to learn how to repair phones, so I ordered a new housing and replaced everything. To my surprise, the phone turned on and everything works perfectly, except for the cell signal....

Chosen Solution I have the Razer Mamba and I can see in his program that I can change the mouse acceleration, what does that means? Hello, I found this on wikipedia: " The mouse acceleration, in the majority of mouse software, refers to the setting allowing the user to modify the cursor acceleration: the change in speed of the cursor over time while the mouse movement is constant. For simple software, when the mouse starts to move, the software will count the number of “counts” received from the mouse and will move the cursor across the screen by that number of pixels (or multiplied by a rate factor, typically less than 1)....

Chosen Solution does anyone know how to remove these there phillips number 1 screws from what i been told there phillips head number 1 an i tryed the screw no luck an now the screws are stripped the screws that hold the power supply in the ones with the tabs i used a T9 and and a Ph1 an and a Ph0 im trying to change the fan an these the screws drivers i used an no luck an i screwed i could use help...

Chosen Solution My blackberry won’t charge in the electric socket. If it’s charged in the electric socket, it will have a red light for a while and then have a battery symbol with red cross on that symbol on the screen. Someone in the internet said I must install the new OS software from Blackberry Desktop Manager in the PC (I use Windows 7 Home Premium) and it must be wired to PC without its battery....

Chosen Solution i cant find my dx-2 sharper image charger where can i find/buy one Hi, Here’s a link to an image in the user manual that shows the drone being charged by a computer from the USB port. If you want a charger just for the drone here’s a link to just one supplier. It is only shown to give an idea of the cost. There are others that may suit you better....

Chosen Solution Hi Guys, My Monitor’s screen (Dell U2417H), is broken from the top right side, I looked for screen replacement everywhere that I knew, online (amazon, eBay, Walmart, ifixit, …), Also, I called to Dell Canada Service and I asked for on-site repair or screen replacement part, BUT I didn’t find screen replacement anywhere. I decided to buy a new monitor but my concern is If this incident happened again what’s the solution?...

Chosen Solution I have input from antenna but no output. Will not transmit, been told output transister(s) are gone. If I knew where they are I could replace them. how do I know if they are npn or pnp? Any help please, thanks! nicholashuntley the NPN vs PNP can best be determined by knowing what transistor you are dealing with. In the attached manual you will find the board layout and schematic with the transistors having a reference designated letter “Q”....

Chosen Solution Hello, I tried in several ways to repair this iphone 4s. I cannot charge it, I tried to connect it to several sockets, with several cables, to the PC, but nothing shows up on the phone and it doesn’t charge. The only thing that happens is when the phone is off, if I connect the cable (to PC or wall socket), it turns on. Also, if I keep it off I can charge it....

Chosen Solution How do I fix my Note 5 from saying this. Recently my Note 5 went in water and I dried it using rice, the phone wouldn’t turn on so I bought the Battery on iFixit here and I put the new battery in with no issues but then when I tried to charge the phone it said that the Battery Temp was too low. I went back in the phones and nothing was damaged so I’m confused now....

Chosen Solution I followed the disassembly instructions on this page and managed to open the headset, but I haven´t replaced the battery yet. When testing the voltage with a multimeter, it says 3.2volts, and the headset indicated that the battery level is low. However, when connecting the USB charger, I have the same problem that the red charging LED indicator does not turn on, and when measuring the voltage while charging, the battery still says 3....

Chosen Solution I want to tighten my back break. I think i saw the right video of how to do it but the bolt might be too old and cant turn.. its a 2006 yamaha vino with 6,489 miles. Brady Reitzel here is how to adjust the brake use a proper box wrench to loosen the nut. Spray some lubricating oil on the threads first and let it sit. If you cannot remove it you will most likely replace the brake cable and need a nut splitter or similar tool to get rid of that nut....

Chosen Solution I need a source for a door motor drive belt for Toshiba sd6100ku. Toshiba says it’s obsolete. @gnvcflyr since this is strictly a drive belt and will not interfere with any video or audio issue any drive belt that is approximately 30mm in diameter would work. I’d try something like this Don’t let obsolescence on Toshiba’s part become a stumbling block for your repair. I did find a solution....

Chosen Solution We did a screen replacement on an Ipad Air 2 that was returned 3 days later with customer stating that the touch ID suddenly stopped working. I know for a fact that this is the original because I helped the tech transfer it from the old screen and tested it to make make sure that the touch id was indeed functioning. I also know that this is the same home button that was brought back in with the device....

Chosen Solution Hello I cracked my phone and the touchscreen features suddenly stopped working about two hors after that. The image displays fine and everything else seems to be working fine is there any way I could maybe fix this at home as a lot of places are closed around me. You’ll have to replace the screen as the digitizer is damaged. It looks like ifixit only has the LCD kit which I highly advise against because that phone uses the more efficient OLED panel and the connectors are not designed to handle the extra current LCD panels will draw....

Chosen Solution Always my iPhone 6splus turning off what is solution please?,the battery is full charged I would suggest having your battery replaced. As your phone ages so does its battery power capacity. I would imagine your phone was produced a few years ago. Similar to a car battery, I stick to a 1.5-2 yr change-out cycle.

Chosen Solution I have a 48" sanyo tv flat screen and the volume will not go up or donw i have to get really close to it for the volume to work like the remote is touching the bottom of the TV for the volume to go up and down and it should not be doing that. Mrburgh , First thing to try is another set of good quality replacement batteries and wipe the remote and TV sensor with a soft cloth to clean of any dust....

Chosen Solution I have two red lights flashing …paper feed and ink light…the printer doesnt move the the ink holder or feeds paper when pressing buttons…can you help If it’s not a paper jam then it’s an “unknown printer error” - which actually means waste ink pads are full and need replacing. There is software available that will reset the counters - though you’ll also have to deal with the ink pads to prevent ink from leaking in the future....

Chosen Solution I’ve tested multiple hardrives with known working partitions. i’ve swapped out the hardrive cable with a new functional cable. tested the hardrive on separate macs, and they work fine. I’ve performed a Pram reset and reset the SMC to no avail. It passed multiple extended hardware tests. It has no peripherals connected and isolated further by removing the non essential components, Airport/diskbay. And i legitamitly have ran out of ideas....

Chosen Solution I have taking my ps4 apart to see why it wasn’t reading disk and now when I boot it up it sounds like the rollers are trying to bring something in and tells me unrecognized disk while no disk is inserted. Sounds like either the laser is dirty or the disc sensors are. Open it up and make sure that isn’t the case. Hope this helps!