Chosen Solution I ended up with a Xbox One for free, it works but it didn’t have the shell or case or whatever it’s called. Where can you get one ordered at? This is the only place I was able to find a Xbox One Chassis . I have no idea if it comes with the top part too, but this is at least a starting place. Honestly my best answer would be check on eBay....
Chosen Solution I have tried to discharge the battery but when it is charged again the issue persists. I have not been able to get into normal boot or recovery mode with any method I have tried. Hmmm… sounds familiar to a problem I had with my Samsung Galaxy S4 phone, and the issue was that the micro power button had broken away from the motherboard, so the device still worked normally, but I couldn’t power it on or go into recovery mode....
Chosen Solution Tablet will not turn on. Charging does not help. Unplug device. Hold down power button for 60 seconds and then let go of it. Plug in the power cord. Now hold down the power button a few seconds and it will (should) come on. Worked for my Zenpad 3s 10. I had been playing game and folded the case cover over and headed into a meeting, battery was @85%…3 hours later I returned to find the tablet dead and not appearing to charge/turn on at all....
Chosen Solution The screen locked and nothing is functioning. Turning the phone off does not help. The only thing that seems to work is letting the battery drain to force restart the phone. Is there an easier way around this? Try doing a power cycle. To do this hold the Volume Down button and then the Power key simultaneously for about 15-20 seconds. If this does not work, try holding the Volume Up button instead of the Volume Down button....
Chosen Solution My tablet is stuck on the Samsung logo screens. It keeps looping through those two logo screens, but will not continue past it. Turn off the tablet.Press and hold together Volume Up + Home + Power button.Release held keys when the Samsung Logo appears on the screen.Select “wipe data / factory reset” by using Volume buttons to navigate and Power button to confirm.Next choose “Yes – delete all user data"And “reboot system now”....
Chosen Solution Touch screen not working screen works touch function not working If your touchscreen isn’t responsive or not working how you would expect, try restarting your PC. If you’re still having problems, check for updates: Select Start , then select Settings . In Settings, select Update & security , then WindowsUpdate , and then select the Check for updates button. Regards, Will
Chosen Solution Hi, my 15” MacBook Pro 2018 Touch Bar system has a problem One of the 4 USB C’s has failed! I did an update to Catalina it was not fixed. I have tried I believe correctly resetting NVRAM / SMC but no success… The system passed the diagnostic test. I have tried safe boot again nothing. When I try to plug in something it pops this message (in Mojave I have never received a pop like this)...
Chosen Solution @bdm4350uc this is sometimes caused by the flat cable connecting the TCON to the LCD panel coming loose. The area of missing video can be dark or completely white depending on the panel design. Since you do have some “signal” to the side it is also possible that this is a bad LED driver board (not yet DIY’er replaceable). I would try and get a replacement T-con board (I’d go for as inexpensive as possible)and keep fingers crossed that it’ll work
Chosen Solution My Kenmore washer will not start. I checked the lid switch and it’s working but nothing works when I use the dial. The dryer works fine. I have a Kenmore model number 417.61712510 combo washer dryer. Any ideas please? Cause 1 User Control and Display Board To determine if the user control and display board is defective, try pressing the buttons on the control panel. If some of the buttons work, but others do not work, the control and display board might need to be replaced....
Chosen Solution where can i send this and my forerunner 235 to get fixed…water got in it. Hi @twocyclebiker The impurities in the water causes corrosion and provides circuit paths for the electricity which were not in the watch’s operating design and could damage the components. The corrosion starts immediately and is ongoing until it is completely cleaned away First do not try to charge or to turn on your watch and then remove the battery as soon as possible from the watch to minimize any further damage....
Chosen Solution Hi, Im hoping someone is able to help me. My son was attempting to charge his laptop the other day and it turns out the end of the charging cable was wet, he didn’t notice, plugged it in, and switched it on. He said something blew, there was a spark from the charging port, and now it wont turn on. Is it ruined? And if not is it going to be very expensive to fix?...
Chosen Solution What direction do you turn the screw to change the blade Robert McKinlay from the manual available here Roberts Longneck Plus Jamb Saw 10-56 (2014) - iFixit " Using the Allen® wrench , turn the blade screw clockwise until the blade clamp is tight on the shaft" To take it off, you would need to turn it counterclockwise. Righty tighty lefty loosey
Chosen Solution What does a red dot mean next to one of my text message It means, they are using Samsung Messenger also. 🙃 Sometimes the dot is green and sometimes the dot is blue. I think the red dot is an indication the person you are trying to contact is traveling like in a vehicle. So that you don’t constantly distract them while there driving and alternately when that dot turns green theat they are stationary and now would be a good time to contact them to hrough messages....
Chosen Solution I bought a 2011 Macbook Pro 13” second hand. Went to replace the battery and noticed an empty spot beside the battery. I’ve attached a picture. What is supposed to be there? Hi, You seem to be missing the hard drive. Here is pic of what should be there. When you replace your hard drive, with an SSD, be sure to also replace the hard drive/IR cable with the wider one from the 2012 model....
Chosen Solution So I bought a Xbox one S all digital edition a few months ago and it has been doing this of an on since I bought it, I’d say within a week. It makes a very high pitched grinding noise kind of like a cd or dvd is in there but sounds worse, sometimes it does this when it is on, sometimes this results in my console crashing. However the next time I try to turn it on it doesn’t work and it just makes that grinding noise....
Chosen Solution On the bose 321 system how to rewire the satalight speakers as I am hooking th up to a Yamaha home receiver with speaker wire and don’t know what each prong is on the back of the gs ll system satellites Not sure what version you have, but user manual with diagrams for Series II is here: https://assets.bose.com/content/dam/Bose…
Chosen Solution When my ceiling fan rotates the noise is like type writer hitting sound . What could be the problem? Hi Sethuraman, I just went through this at my son’s house; all of his ceiling fans were noisy in different ways; on two of them the blades were loose and just had to be tightened; the other one wasn’t mounted well to the ceiling and had to be resecured. So yeah, grab a Phillips screwdriver and tighten all the screws that hold the fan blades onto the motor....
Chosen Solution Where can you find the replacement battery??? My battery was shot and would no longer hold a charge. I found a replacement 500mAh lithium polymer battery on eBay that is very close to the physical dimensions of the original 430 mAh Li-Po battery. You just have to shave the little plastic ridges away in the area where the battery sits with a sharp knife for a perfect fit. In order to connect it to the internal electronics of your ClamCase, clip off the battery connector and red/black wires about half way on your original battery....
Chosen Solution No picture, TV sounds like it tries to turn on but doesn’t. Yesterday it turned on after a hard reset but won’t today. 8 blinks of the red LED light. Is it the SS board most likely? @fmplatt530 yes, your SS board is the primary suspect. Check the board itself and see if there are any scorch marks on the board around the screw holes where it connects to the chassis....
Chosen Solution I have a 1991 Toyota pickup 3.0 V6 the problem started when the temperature gauge acted weird going up and down. After, every time when I turn on the ignition switch, the water temperature gauge in the instrument cluster goes up to the maximum even without running the engine. It will still being UP to the max temperature without reason. I have replaced the water temp sensor, the ECU, the instruments gauge cluster and still does not fix the issue....
