Posts

Chosen Solution I was watching TV and it turned itself off. Now it is continuously trying to turn back on. My model # is UN32EH4003FXZA. Any help is greatly appreciated. does anything happen when it tries to come on? the screen cut on or does it just immediately cut off? if it stays on long enough, try updating the firmware. if it doesn’t then try the below. unplug it for 30 seconds and let it sit plug it back in after 30 seconds and if it continues to cycle on and off itll need to be serviced!...

Chosen Solution I got this MacBook Air A1466 bought in 2014, from a friend. The laptop is working quite well, maybe it’s a bit slow but it’s ok. I would like to extend the life of this little device and I’m thinking of installing a Linux distro and upgrading some hardware. Apart from the battery (it gets to 70% max) what other parts can I upgrade in your opinion? RAM 4 GB 1600 MHz DDR3Intel Core i5 dual-core250 Gb SSDIntel HD Graphics 5000 1536 MBWifi 802....

Chosen Solution Hi all! So, this is my grandma’s TV, it has gone bad overnight and she wanted to know if I could fix it. It’s at my place now, half disassembled, so if you’d like more info, just ask. When the TV is cold (not being turned on for 24 hours or more) she gets vertical coloured lines appear, but they go away after a couple of minutes. After that the picture is nice and crisp for 10/15 minutes But after that it starts to display every picture/text double, like everthing is in 3D....

Chosen Solution I have a Canon vc-50i that shows distorted video. There are squigly horizontal lines all across the screen. When it first powers up the picture is fine then after a minute or so, the picture begins to jump and vibrate and show horizontal lines. Does it have a wireless or wired connection? If its wired, it could simply be a bad video cable interfering with the video. I was also face this issue in my HD Security Camera which I brought from Orlando, but I fix the issue myself with these hacks....

Chosen Solution My Kenmore 110 Series clothes washer doesn’t spin, agitate, or rinse. It does drain. @gdmlwilliams If your Kenmore 110 Series Washing Machine refuses to spin or agitate during the wash cycle, see the Kenmore 110 Series Washing Machine Doesn’t Spin or Agitate problem page for possible causes and solutions. could be a door lock switch issue as well as a motor connector issue. Either replace the door lock switch or jump it for testing purposes....

Chosen Solution Hello, a while ago I spilled some water and I think some went into the vita without me noticing. A few days ago I went to play on my vita and I noticed my right analog stopped working completely. I tried switching left and right analog sticks and both worked on the left side. So my guess is that the right button board is damaged, but the weird thing is that all other buttons on the right side work perfectly....

Chosen Solution started as just some lines on the display and I was watching it and now it has evolved into this permanent mark that shifts color depending on what’s on the screen at the time I’m guessing as can be seen in the image a group of pictures taken. not sure if its a display cable issues as i was searching I saw a lot about FlexGate issues if this is one please let me know how to proceed on getting a fix....

Chosen Solution My iMac doesn’t boot up completely it plays the startup sound, it takes me to a screen with lines and the apple logo then it takes me to a blue startup screen, it later takes me to a screen with blue boxes and a mouse cursor. First hook it up to an external monitor. If you get the same thing you will know you have a bad GPU card....

Chosen Solution I recently purchased X5C-1,great little drone for a learner like me..I saw a vid using a phone battery to extend flight time.I tried this and although things looked well,phone battery was charged, connection good,when trying to take off the power only lasted seconds before completely dead…Gave it up as a bad job and reconnected back as was,now what appears to be a fully charged original battery is doing the same thing,10 seconds then nothing....

Chosen Solution Hi, Got an iPhone 8 with a broken male and female antenna connector. It’s on the USB charging flex. Need to know the exact name and specs so I can find where to order it from. I’ll prob get it from digikey if I know the exact specs. Please refer to pics I cant find it anywhere on the net and o ZXW that’s why I ask. Hope someone knows....

Chosen Solution I’m curious to know what will happen, if I only replace the NAND flash chip with another chip from another iPhone. Will it work? Or will it crash, not boot or what? Probably go into DFU mode and show some sort of error during restore. (4013, 4014, 9, 40, etc.) If you want to upgrade the NAND, you would need a new chip and a NAND programmer.

Chosen Solution Use to be when I plugged in a 3.5mm device into universal jack, a options box appeared allowing me to choose what device I just plugged in. Once before I checked the box not to ask me again (that was a mistake); and only after refreshing my computer did the box reappear (so I never checked that box again); now the options box is gone again and I don’t know where to change options for the 3....

Chosen Solution Checking indicator lights I Plug the iMac in, LED 1 would light up; press power button then LED 2, 3 and 4 would turn on then all LEDs turn off Would appreciate help This sounds like you have a bad capacitor on the logic board. This will take a bit of effort to nail down. You’ll need to find the schematics and board view drawings to trace out the voltages....

Chosen Solution The iPhone 5 LCD backlight is not working. How do I repair that. When I reboot the phone, the apple will appear but only in black. The screen is dark gray. Some said, it’s the proximity sensor is causing the screen to go dark. I’ve change out the sensor but that doesn’t work. What else can I try. Your answer is much appreciated. FIRST OF ALL, if your iPhone is still under warranty, do not read the following & go to an apple store where your phone (if not damaged) will be repaired/replaced for free....

Chosen Solution Where is the thermostat located on a kia 2005 optima It’s in between the engine and air intake. Second one down, horizontal. The hose looks like it goes into the lower part of the radiator. The thermostat is inside the housing. the thermostat is number 5 in the diagram Good Luck Where is the thermostat located in a 2004 kia optima

Chosen Solution Hi, I had issues where my tablet would not charge, so after you tubing the “supposed” fault, I removed the back cover, and all I done was to disconnect the battery for 15 seconds then reconnect, it then started to charge, however although that solves that issue, now my touchscreen is unresponsive to the touch, it lights up and everything, but that is all, please help? Factory reset may also be an option as the power issue you’ve had could have corrupted the touchscreen driver

Chosen Solution Hi all, yesterday I’ve spilled a glass of water of my Macbook. Switched off, used a hairdryer and then left to rest the whole night. Today I’ve switched it on and everything looks ok, expect for the Trackpad and Keyboard. In particular: no key seems to work in the keyboard, exception made for the power on/off buttonTrackpad does not work and it seems already pressed with no “click feedback” Additional notes: I’m using a bluetooth mouse and an external usb keyboardThe hardware test only reveals a battery issue (but this I already had this battery issue before) Questions: What is the issue likely to be?...

Chosen Solution Unresponsive with blue screen, does not show any numbers or or words? shortpapa23 that sounds like your video processor is either not working or your firmware has failed. You do want to unplug your set and keep it unplugged for a while. then plug it back in and push and hold the power button for a while to see if it does reset. Check on here or the firmware as well as the instruction for how to do it....

Chosen Solution Hello! My question is if I can upgrade the video card of my iMac Intel 21.5" mid-2010 (EMC 2389, i5-680 3.6 GHz, 8 GB RAM) to, for example, a GeForce GTX 765m or any other, since I saw a couple of videos but talking about the 27” model. The problem is that the video card blew, I guess. The iMac started running very slow suddenly, and after a couple of days it stopped turning on (after a few seconds while turning on, it suddenly turns off)....

Chosen Solution Hi everyone. Anybody explain me plz what is VCC main short?? I always think, if i connect the iphone motherboard with DCPS, and phone abosorb current without poweon its vcc main? is it true? I know, i can verify also with multimeter on any capicitor on VCC Main rail. But i would like to clear this concepet for my general knowledge. Any iphone, who doesnt power on and absord current after connect to DCPS is it VCC main short?...