Chosen Solution I swapped the battery and that worked fine. The screen appears fine but now the touch screen isn’t responding any more. I’ve reseated the cables (I removed to install the new battery) numerous times to no avail. Finally I gave up & tried the “Factory Reset” still no response. Any ideas? Thanks in advance! Was the touch screen working before you replaced the battery. If not then replace the digitizer....
Chosen Solution I don’t know why but the screen has dead zones, I can’t write or select in the keyboard (x, e, I zone) it Hasn’t Scratch or marks In The Screen Probably the glue of OGS is end his life so screen is going off i have this problem to.
Chosen Solution I’m trying to remove the screen from my S3 to remove the battery but when I used my curved blade, a gap isn’t created between the display and the chassis. Can anyone help me on how to remove the display? I am following the guide as close as I can. Have you tried using some sort of heat before prying the screen off?
Chosen Solution The tuning line that goes around the rollers inside the receiver came off. Hi, Here’ s the section from the service manual for the receiver, that shows the procedure to string the dial cord.
Chosen Solution Hi, I have had a series 4 GPS since about March 2020 It’s been working fine, but about mid August , it stopped connecting to the internet. I thought maybe unpairing and repairing it would fix it. I unpaired it and factory reset it, and went through that process. Once I finished doing that and got to the pairing screen, and I started to pair it again. On restore from backup, it would say preparing, and then load for about 2-5 mins, before I got a screen saying something along the lines of “Unpairing Apple Watch, this could take a few minutes....
Chosen Solution pretty much the title. my screen is cracked, but that wasnt an issue until a tiny shard came off on the bottom right corner and now my screen is completely unresponsive. do i just need to get a new screen entirely? @natu_xatuu, When a cracked screen (that has worked) stops working, it has to be replaced. Luckily, the process isn’t all that hard, and iFixit has a guide on how to do it....
Chosen Solution What is a good replacement for ram? You guys are currently out of stock of the 8gb ram. You’ll need 1333 MHz PC3-10600 DDR3 SDRAM This RAM is becoming harder to find as its just not being used in the current generation of systems. Here’s one source 16.0GB (2x 8.0 GB SO-DIMM) OWC Memory Upgrade
Chosen Solution Machine: - 27 inch Mid 2010 / iMac11,3 / A1312 / EMC 2390 / MC784LL/A 2.93GHz i7, Radeon 5750 …I have replaced failed cards in these before, but the price of the one I had been going with before (Radeon 6770M) has been continually increasing, leading me to suspect that it’s a discontinued model now getting scarce. What other options are out there that are compatible with the 2010 iMac listed?...
Chosen Solution I sent my phone out for repair but they are saying the LCD assembly got damaged as well, is that possible for a small dent on the volume button to cause that damage? is the volume button near any support or construction of the phone? Maybe they meant that the button cannot seat properly but I am not too sure. Sorry I do not understand what you are asking Could you expand please...
Chosen Solution Hi I have a Whirlpool side by side refrigerator. All of a sudden the water stop to dispense and ice make would not make ice. I tried removing the filter below the fridge and water comes out of the dispenser. I suspect that the filter may have gone bad, however when I replace the filter with the new one, the water won’t dispensed too. I tried removing the filter and water came out....
Chosen Solution I got this a few days ago, and these were already broken. Don’t know what they’re called but them being broken is causing Black lines in the screen while the rest works fine. They’re attached to the screen but I have no clue how to fix them or if I can. None of these cables are okay besides 1, theres 6 in total. Please help Hi @salmab It is very difficult to fix them and is not really a DIY repair....
Chosen Solution Hey all, recently I’ve noticed that my MacBook Air 2017 is running very sluggishly and I was wondering what I can do to fix that? Activity Monitor shows no unusual processes running just the usual processes which have never caused any issues. I have restarted my computer and even reset it a few weeks ago and it still runs slow. I am running MacOS Mojave 10.14.6 Thanks in advance, cody...
Chosen Solution While riding the motorbike, the engine will shut off and it will not start back up. When I try to start it back up, it makes a constant continuous chugging noise but the engine will not turn over. If the bike is carbureted and has been sitting for an extended period of time there is a chance that the float valve is sticking in the closed position. This will prevent fuel from filling up on the carburetor bowl, and starve the engine of gas....
Chosen Solution I’m guessing from your posts that English isn’t your first language and that may mean you have missed some websites that might have answers to your question. There are various Kickstarter campaigns that are aiming to produce either complete straps or adapters to allow conventional straps to be used. It might be worth checking them out. I hope they can help.
Chosen Solution trying to find the right rear diff specs for a 1976 F150 HB There should be a warranty plate on the drivers door below the latch with the option codes it is riveted on it? I am guessing a 3.50 or 3.55 in the rear & a 3.73 in the front.
Chosen Solution What part and tools will I need to change out the charging port for my IPad Pr 12.9 2nd generation? This will be my first attempt to DIY a repair. I am hoping to find a how to video as well. The charge port is soldered onto the board and is not a repair you should DIY as you can easily mess the board up and cause more damage and requires thousands of dollars in tooling....
Chosen Solution First off, the device is a Mini Lifejacket 3, not 2. iFixit just doesn’t have the Lifejakcet 3 as an option when choosing a device. One of the speakers inside of the device had one of the wires disconnect due to a poor soldering job, which during my analysis, the second wire also popped clean off with little effort. The device houses two 4 Ohm 3 Watt speakers and after searching online to find a replacement, the ones that came up are in various sizes and won’t fit it seems like....
Chosen Solution Where can I buy the charger of this camera Hi, According to the user manual the charger is model # BC-CSN/BC-CSNB b. Search for BC-CSN/BC-CSNB b. to get results for suppliers.
Chosen Solution I recently broke out my Vox amPlug Bass headphone jack so it came off and I can´t figure out where the red cable should go. I know where the black one should be, because I took it off by myself to practice soldering as I haven´t done much yet. So my question is as I asked before: where the red cable should go? Is the place where the arrow is pointing right or not?...
Chosen Solution Recently, April 26 of this year (2019) to be exact. My tablet screen cracked from the inside to the point of the screen being almost entirely broken. The screen still responds to touch, however, I am unable to see anything at all. I called today and I was told that due to not purchasing the extended warranty right when I bought it. it couldn’t be fixed without it. So I ask if there’s a way to purchase they extended warranty and I was told I couldn’t....
