Posts

Chosen Solution In a week my ear buds have gone from around the 6-7 hours of playback i’ve been used to to lasting around an hour at best. Is this likely to be dying batteries? If so how easy are they to replace, and if not what could be causing this? Some issues could be The batteries are faultythe software is not updated on the buds.Sony could be at fault as this seems to be a somewhat common issue....

Chosen Solution The left middle socket tail light won’t work. The brake light and turn signal in the same socket work perfectly. You have a short somewhere in your wire to the light bulb. Your Manual will have a diagram for all the wiring. Find the wire going to that bulb and fix it. Don’t forget to check your fuses as well it could be as simple as that.

Chosen Solution when i play games like bf1, r6s the processor fan some times stop and the temp. of the processor reach 100 and stay about one minute then the fan work , that dont happen with games that need low requirements my set up intel core i5 4440 ram 8 gb windows 10 64 bit gtx 750 ti Just to check what cpu fan are you using? intel stock fan or 3rd party fan…....

Chosen Solution Why does the red light blink 5 times and still doesn’t have a picture @bug4 Samsung does not really use blink codes (even so they show there is absolutely no documentation about those) We would need to make sure that your TV is a LN46A530 and what you have checked. This can be a power board issue as well as a backlight/T-con board issue. You would have to remove the from your TV and take a look at the boards etc....

Chosen Solution Hi All, I changed the earspeaker of my iPhone 6, because the sound was very low and can’t hear the others. After the earspeaker replacement, the sound became noisy and crackling. Do you have any ideas, what is the problem? Maybe the new earspeaker is wrong? Thank you for your reply! Most likely some debris or something other that is impeding proper conduction on the connector Sorry for the late reply, I could do the assembly just now....

Chosen Solution Hello everyone, I recently acquired an Xbox one s, never opened, at least it seems to have never been opened (the original sticker was present). The console does not turn on, so I decided to open it. And while dismantling everything, I discover this: As you can see, it seems that there are traces of corrosion. I tested the 6 pins of the power and there is a bridge....

Chosen Solution Ok so needed new transmission clutch and u joints changed them all myself and put back together now truck won’t start new battery new starter can her single click when go to start but won’t start can’t figure it out is there way to install wrong I went off YouTube videos but now sure what to do and don’t want to have to take to shop trying to get started...

Chosen Solution I want to re-purpose my broken iMac 27 (late-2011) display and make it an external monitor. I found a video on YouTube of a guy who did this, but I need to find the right LCD controller board kit for the monitor, and I don’t know what to search for and know I’m choosing the right one. Can someone point me in the right direction? Patrik it really does not matter where it comes out of etc....

Chosen Solution What can I check on a 52” Plazma LG TV that turns on but then it turns right off? hey @poolartduster1, i would first try to see if there are any signs of a blink code on your set. that could point to a place to start. if not applicable, you can unplug any periphial thats connected to your power supply, i.e main board, driver boards….to see if your tv will post and stay on this way....

Chosen Solution I have no idea what is wrong after replacing the power board and main board. Where does the board that the power button connects to plug in to? If it is the power board directly, great. If it goes somewhere else (like main board) this will work too but it becomes harder to pinpoint the problem. Anyway, what I do on this issue is, as much as possible, try to unplug all boards from the main except the “power button board" (and to make sure that the standby/on LED is plugged in too)....

Chosen Solution My new UE MegaBoom is just a week old and the battery went off. Actually the battery was 40 % but could not turn on. When I connect the charger theres no light coming out from the on button. However the speaker is working while on charge. When I remove the charger the power goes off. How can I solve this issue?? If you just got it you still have a warranty....

Chosen Solution Hi there, on my old Macbook Pro (Mid 2007, A1226) with a broken videocard/internal display I’m unable to access the recovery mode (Command + r) with an external screen, but resetting the PRAM or entering the boot menue with alt is possible. If I keep pressing Command + r to access the recovery mode I’m just thrown to the login screen. Why I want to enter the recovery mode?...

Chosen Solution Can I use i7 3770s to upgrade iMac 21,5" Late 2013 instead of i7 4770S First there was no 3770s 2013 21.5 iMac. There was a 2012 system which was just a 3.4GHz I7-3770 as you can see here iMac13,2 and here’s the 2013 systems iMac14,3 which does have a I7-4770S. So where does that leave us? Not sure why you are down grading your system CPU. If we compare the performance of these two CPU’s the I7-4770S is the better CPU and the 2013 system also offers the better GPU

Chosen Solution HELP! I have quite a similar problem. I upgraded my MBP 13" mid 2012 with a Samsung 250gb 860 EVO 2.5" SSD. I’ve done tons of research before I proceeded changing my MBP drive with an SSD. However, my macbook is acting wierd with the SSD but not with the HDD. my problem is: when I turn on my macbook, halfway through the bootup loading screen it shows a “Prohibitory sign” ( which means a valid start-up disk has not yet been found), after a few minutes the screen shuts off then turns on and displays the loading screen and continues to complete the bootup....

Chosen Solution The Apple developers forum confirms that the new Auto Unlock with Apple Watch feature offered in MacOS Sierra works only with an 802.11ac, not with an 802.11n. So if you want this feature to work, you will have to replace your <2012 n with an ac board. The question then is the part number that corresponds to the 802.11ac that works in a <2012 MBM. Update (01/22/2017) Yes. Mac Mini....

Chosen Solution I dropped my iPhone in water. Of course, now I know I should not have tried to turn it on, but then, as soon as I picked it up, I tried to turn it on, the screen flashed white, and turned off completely. I put it in rice, and Damp Rid for 24 hours, but it still didn’t come on. So I plugged it in, after a few minutes I hear it make the sound when you plug it in to charge, and it made the sound of getting a text....

Chosen Solution Ok so my ZTE avid plus its acting stupid I try to put my password and it says wrong password before I can finish and when I get inside my phone I try to use my keyboard and I make a mistake I try to erase it but it doesn’t let me and when I press something it does something else this has been going on for bout # weeks now....

Chosen Solution When you refurbish apple LCDs, what kind of glue do you use to re-apply the plastic frame around the glass? I’ve been using superglue up until now, and it works okay. But sometimes it can make a mess, or it will show through as white spots on the edge of the frame. I want to start doing these the correct way, so what glue should I use? Also, does anyone have any experience using backlight sealant?...

Chosen Solution Every body know the electronic component in the picture. It like a light but not. https://photos.app.goo.gl/U9fOiaK1aRkB0x… @hoangnhatng it is a bit hard to see. It is not a capacitor but looks more like a mercury switch or similar. Can you tell us more about where you removed it from and if there is any movement within the glass when you roll it to the side. If so it is a switch....

Chosen Solution what size screws connect the propeller guard to the drone? I need to find a few replacements. need 3 of these and hoping to pay under $2 including shipping If you are still looking for this problem I have found that the 1.0 phillips bit from the jk 6089 toolset (if that even matters) works