Chosen Solution It seems like there is a bad connection - starts whether its on max or not and then slowly dies out. It is not plugged so I am at a loss. I had this problem once, all you have to do is plug it in and press the power button on and off a couple times. Then unplug it and it should be fine. Hope this helps. Anonymous :)
Chosen Solution I have been trying to repair the touch screen on my iPad mini. We got the old screen off and the new on. The home button works, but despite trying to attach the new screen a couple times, the touch screen doesn’t work. What do we need to try to get it to work again? The iPad mini is a very fussy device to repair. 1. Make sure you have a high quality screen or you will have issues....
Chosen Solution I spilled soup to the left side of my macbook pro 13 inch 2015. I did not see any liquid inside the ports, so I did not do anything. Then two days after, the touchpad and keyboard do not work (the forcetouch trackpad still has feedback but does nothing). So, I did some research and found that this problem is usually caused by the trackpad’s cable. I have 2 questions regarding this issue: I’m about to buy a replacement cable from iFixit, but I just want to make sure that the problem is actually caused by the cable not the soup that I spilled....
Chosen Solution Hi, I have a really strange problem. In may 2016 I got an iPhone 6 for repair. I used either a screen my supplier claims to be original, or a A+ refurbished screen with used, but original LCD and digitizer. Now, january 2017, I’ve got the phone for repair again. I’ve tried 15 screens of this kind from different batches: A+ (original LCD and digitizer) New, original (according to the supplier) screens Tianma Shenchao Swaped screen with other iPhone 6 I’ve even tried a screen I know is from around the time for the last repair....
Chosen Solution Hello, so the deal is: Someone i know got their screen replaced by a private person. Screen works fine, but front facing mic dosnt work. I thought he had damaged the mic, so i tried a new one. But without any luck. It still wont catch the sound, it just makes this pretty blurry noise. I have checked that the dust mesh is clean and open. So can this be any motherboard related?...
Chosen Solution Cannot port over my iPhones and iPads to Verizon. Need to replace icee antenna for universal ones This cannot be done. There are 2 versions of the iPhone 5s, and the internals are different. You cannot simply replace an antenna. Version 1 is GSM only, which means you can only use Tmobile, AT&T, Cricket, Straight Talk, etc. Version 2 contains a CDMA chip, which is required by Sprint, Verizon, Boost Mobile, etc....
Chosen Solution WHen I connect using micro USB cable to the charger, its not getting charged. I can only charge the phone using the charging port at the bottom. Also when connecting phone to the USB its not even detecting. How can I fix or repair that. Hi Sandeep, Try this: Remove the battery in order to avoid short circuits during procedure. Take a needle and pick out all dust and dirt that is in the USB socket of your device....
Chosen Solution Just checking how to replace the S5 Active’s USB port flap. The regular S5 looks pretty easy but the S5 Active doesn’t have a screw close to the flap. Thank you! I’ve had the cover/flap on by Gorillia tape since i posted up here and hs worked pretty well. The S5 Active covers are ridiculously expensive compared to the regular S5 so I haven’t taken it on yet but might soon....
Chosen Solution Hi, I need help with a vintage ge refrigerator that freezes everything. It’s a 1050 GE. I think it needs a thermostat. Update (02/06/2020) 1950 GE refrigerator needs thermostat. Where can I find one?
Chosen Solution I have a GE top loading washer, model #WJSR4160G2WW, recently it has stopped agitating and spinning, it fills as normal, and then makes sounds like it might want to agitate or spin, but it doesn’t, and then it will drain as much as it can without spinning water out of the clothes, and they come out soaking wet. We have replaced the door assembly, and checked the belt, it is fine and intact....
Chosen Solution ok so my s8 had a cracked scree kid dropped it down the toilet and bingo phones dead so my question is if i order another s8 with a cracked digitizer can i use the digitizer which is not cracked from the water damaged s8 as a replacement In theory yes, in practice i wouldn’t unless i can ensure no corrosion damage to connection terminals. Depending on your cost might be worth it to test....
Chosen Solution Can the water inlet valve be bad if I have plenty water through the dispenser but no water in the ice trays? The fill tube going into the icemaker can freeze, causing no water to get to the icemaker. The icemaker must be removed to verify this. If this is the case, the refrigerator dispenser will still work
Chosen Solution In short, my pixel 3 met with shallow salt water for 5 minutes. upon exit it was still on! But then turned itself off. Now it will not power on. I’m told the motherboard was likely impacted. I’m not ultra concerned about the phone fully working again. I am totally concerned about losing my photos…. Is there a way to get the photos off of this phone??? It would require advanced micro soldering and equipment....
Chosen Solution i disassembled my iphone about 4 times already and reassembled it perfectly. however after the 4th time, my iphone’s wifi is extremely weak. i use to pick up 3 bars anywhere in my house. now when i move about 30 feet from my router, the wifi cuts off. now im trying to take my phone apart again, but now my motherboard (logicboard) is completely stuck. i took apart all the screws like usual and it still wont budge at all....
Chosen Solution Hello fellow Fixers! This question has been on my mind for years now I have yet to find an answer so I have come here to gather like minded people to find a solution. What I am running into is screens coming loose from the frame of the screen its self (not the frame or casing of the iPhone). A lot of my parts have been coming back from costumers with the screen coming up or loose....
Chosen Solution i tried replacing my screen and i lost a part, i’ve tried searching for a new one but i cant find it anywhere. it is internal and it is a tiny metal clip that connects onto the flex ribbion that connects to the home button EDIT: added picture Get it on eBay
Chosen Solution Why don’t you check on eBay. You will want to know the exact model number for your phone. This will help you narrow down the options so you can find the right screen. The aristo 2and3 screen are the same and they are interchangeable. I believe the digitizer is the same also but I know for fact the screens are the same. I personally put a A2 in a A3....
Chosen Solution @danj hey dan, So I want to buy mid-2010 white unibody MacBook and I want to upgrade it a lot. So I mainly want to upgrade to SSD and I wanna upgrade my RAM, I don’t even know if anything else is upgradable. So my first question is, for a 2010 MacBook, can I upgrade the Core 2 Duo an Core i7 chip? And is it possible to upgrade the graphics card?...
Chosen Solution It’s been 1 week .. whenever I put my mobile for charging..my mobile get restart multiple times. abhishek sonawane start with a new battery. After that re-evaluate. It is possible that this is based on the charging board but you will need a NEW battery first. This video will help you with that.
Chosen Solution With no plastic enclosure at the display hinge, where are the Wi-Fi antennas in the late-2016 MacBook Pro? It looks like the antennas are either in the upper right corner looking from the bottom with the trackpad closest to you, or they squeeze through the hinge with the display connectors. I’m going to guess that they’re in the display assembly at the top.
