Posts

Chosen Solution I need a repair and parts manual to replace my battery compartment door on my camera because I think a small lip is broken on it and it won’t close with batteries in it. Sadly, I was not able to find any useful repair guides for you specific camera. Though, I was able to find some parts that might be able to fix the camera. These are off of ebay, so your purchases are at your own discretion....

Chosen Solution Where i can find CMOS in the x555ld board To get to the cmos battery, you have to totally take the laptop apart and remove the motherboard. It is under the motherboards plastic housing inside the laptop. If you are not faint of heart then take pictures of each step and save the screws in different containers as if you put in a screw back in a wrong hole you will damage the unit should one go in too far, or a short one could fall out....

Chosen Solution I have an Lg 60LB6560 and the whole screen flashing. It still has picture and sound in background. I pulled out both cables one at a time but still flashing. Does that mean it is not the cable? Thanks Roanne @roanne the flashing most likely comes from a failed LED backlight array. Your model LG seems to have those troubles. Your power supply will only in very rare cases be the reason for this....

Chosen Solution I went to play Xbox online with friends so I grabbed my mic and put it on my adapter wasn’t working so I took it out when I tried to put it back in the controller it would not go in all the way so I forcefully plugged it in but that broke my controller. go to EB games, or Best buy and buy a new adapter. this will be your least expensive option....

Chosen Solution I dropped my phone, and when I picked it up, some parts of the glass had fallen out, and the rest is barely staying in place. And the bottom half of the screen doesn’t work. Will getting the cracked glass changed help? If part of the screen does not light up, chances are the LCD has been damaged as well. You would probably have to do a full display assembly replacement, LCD and digitizer (glass)....

Chosen Solution Hey guys im wondering if anyone has reviewed the Blackberry Priv And what there thoughts are on the device The phone is 3 years out of date, and the manufacturer no longer makes phones. If you can root it and update it to Android 8.x it may be worthwhile, but for repairs, parts, etc, you’re not going to get much support as not very many were made or purchased....

Chosen Solution Hello, I got the Casio Commando phone two weeks ago, it is brand new but suddenly the touch screen stop working in some areas. does that mean that it is broken? what can I do? Hey, It could be due to humidity in the phone. Try putting the phone in some rice to draw some of the moisture out. If that doesnt work then try and replace the touch screen and if all else fails then I would try and get a new phone....

Chosen Solution I just installed the new touch screen panel and since doing that, the phone hasn’t worked properly. The bottom row doesn’t work, and when ever i go to click an app, the app to the left gets clicked. I’ve tried reconnecting the new touch screen multiple times, did a hard reset, and restored my phone. Nothing has worked yet It sounds like you received a defective front panel. I recommend requesting a replacement from the company you purchased the front panel from....

Chosen Solution Hello, I am having trouble with left click button, especially when dragging windows. I think similar problem exists in other trackball mice as well. Hoping to find a DIY solution. Regards, Sachin Hello Sachin,I didn’t myself have had any trouble with the Ergo’s switches, but I did with other mice. The solution to your problem would suggest a problem with the switches. Since I don’t have specific experience with the Ergo switches, I would suggest you search on iFixit “switch Logitech”....

Chosen Solution leveled washer and removed basket and changed suspension bars also reps sensor and check stator for cracks… still ul code comes on spin cycle. @natenate besides the obvious (unbalanced load ;-) there are a few other things that can cause this. Check the suspension kit of the drum to make sure that it is not excessively loose. Most commonly for this model is a failed rotor position sensor or a cracked stator on the motor....

Chosen Solution After 2 years of working perfectly the unit will not connect to a satalite anywhere It is two years old many receivers go bad after that long including hand-held radios. It sounds like it is time to get a new one. Or have the unit taken to a shop the have the receiver section re-tuned/re-aligned if that can even be done.

Chosen Solution Upgraded my MacBook Pro mid 2014 with an ifix it battery and a new transcend ssd. The battery is working good but the ssd is at lower write speed. Transcend 240GB JetDrive 850 NVMe PCIe Gen3 x4 SSD TS240GJDM850 The original Samsung is a x2 lanes and I reach speeds of 500/600mb/s The new ssd is a x4(supported by the MacBook) and should reach speeds of 1000+mb/s. Other people confirmed that they get them for the same MacBook....

Chosen Solution is there a way to get a guide or something I would like to max out my machine and I think my hinge is broken Hi @breaculp , The maximum memory that the laptop supports is 8GB (2 x 4GB) DDR3L-1600 SODIMM memory (DDR3 PC3-12800) You can replace the HDD with a SSD to improve performance (up to 2TB 2.5” sata SSD - 9.5mm adapter required to ensure that the SSD is positioned correctly in the laptop’s HDD drive bay)....

Chosen Solution I’ve been told by the local computer repair place that the USB ports, which have become very loose over time, can’t be replaced. Is this correct? You can do it on your own just visit this link (https://www.youtube.com/watch?v=L6bzWKMK… you have knowledge about motherboards………. but don’t give it to local people because they don’t have proper knowledge about this and they end up spoiling it.

Chosen Solution Same thing was watching TV then a loud pop and TV quit playing. Using firestick. TV model number is LN46D550K1FXZA serial number is Z315CBB802141Y version SQ03 @snakebstr unplug your TV and unplug all inputs. Remove the back cover and check the power board for any obviously damaged looking components. This can be caused by a bad capacitor as well as a blown rectifier. If there is nothing obvious you could use a multimeter and check the voltages to the power board as well as the connector the ribbon cable to the main board....

Chosen Solution Hey! I have the same issue. Dropped it in water (like a dumb $$@) pulled it out immediately, stuck it in rice for 20ish hours, turned it on and BOOM it worked! And then the screen started flickering. It’ll stay normal for just a second and then flicker and then stay off until I click the round button. So, now I need to know if I should put it in rice again, or take it apart and replace the motherboard or WHAT....

Chosen Solution And if so, how? I think this is the Bluetooth since the WiFi works fine, and I couldn’t get the Pro to recognize my bluetooth headset. I’m nervous as !&&* right now. https://www.ebay.com/itm/2016-Apple-MacB… I’m not ready to spend that to replace it, since if I replace the logic board, don’t you lose touchID? Does the touchID button still function as a power button if I replace the logic board, or is there a handshake mechanism?...

Chosen Solution Attached is a picture of the loose piece I got after replacing the iPhone 6s plus’s charging port. I don’t recall when exactly this piece flew out. Now my back camera and flashlight works intermittently, and front camera does not work. It appears to be the antenna bracket in the top left of step 31 in the charge port repair guide which shouldn’t have an effect on the cameras....

Chosen Solution im wondering what screw bit the note fe uses so i can fix my phone Here’s a list of the tools needed to fix it: Samsung Galaxy Note Fan Edition Teardown

Chosen Solution I’m resetting a windows 7 laptop and then I get to a point where the machine says “No valid windows installation disk can be detected” even though the disc is in. Any reasons why this might be happening? It might be the bios settings Set the 1st Boot Device your CD-ROM or USB stick if you have the Windows 7 kit on a stick.Go to Security tab/menu and Set Secure Boot to disabled (this option is available only for some UEFI BIOS)....