Posts

Chosen Solution Steps: Press power button. Red LED lights up and stays in a solid state. Screen will respond with a completely black screen (no picture, no UI, no graphics). After 15-20 seconds, TV will automatically power-down. TV will repeat steps #2-4 for a few cycles. Unit eventually turns off completely. I tried: Holding power button (with and without unit plugged in). Holding power button + volume (with unit plugged in)....

Chosen Solution hi After Change LCD Two Camera and flash Not Working only see black screen i need solution Thank alot Does your earspeaker work? If not, it’s possible that you damaged the front camera flex, which can cause a failure of both cameras and flash. Otherwise, try turning it off and on again (I know, basic but sometimes it works!)

Chosen Solution I am following the screen replacement guide for the iPod Touch 5th Gen and cannot for the life of me pry the screen off with the hairdryer and suction cups. I’ve already broken one suction cup, and the last one I own is stretching to the point where I’m certain it will break soon, as well. I’ve taped the screen and used a hair dryer on low and high for varying degrees of time to try and pry the screen off, but it never budges… Am I missing something?...

Chosen Solution So my Nexus Galaxy Volume down button doesnt work. I have isolated it to the motherboard connection, its “disconnected” on one point of the motherboard where the volume up and down connections are. I would rather fix it myself than to send it off to Samsung and have them tinker with it for a month. Is the connection on the motherboard a soldered connection? Heres a photo to help see what Im talking about (http://guide-images....

Chosen Solution Hello! Is it possible to put PCIe/NVMe SSD in Late 2015 21.5” iMac 4K? Mine has a standard 1TB HDD which I’ve replaced with a 2.5” SATA SSD, but now I’m looking for an upgrade to double SSD build (Blade SSD combined with a 2.5 one). Is it possible to do this? I’ve heard non-fusion drive’d i’Macs (those with regular HDD only) don’t have the slot for a blade SSD....

Chosen Solution Hello, I have an iPhone 6 that came into contact with some water. It is now stuck in an apple logo boot loop. I tried to restore it and it will go into DFU/recovery mode and will connect to iTunes and try to restore but will fail with error (9). I tried a new charger port on it but it failed to restore. I also tried a new USB port and cable but same thing....

Chosen Solution I usually use Isopropyl Alcohol to help soften adhesive to remove phone batteries, and usually its ok, but with this iPhone 4s I must have either used way to much or it can seep under the display easily. I did see slits in the housing right where the battery is so im assuming that’s the issue. My question is, is this display permanently damaged like this or can it dry out after awhile?...

Chosen Solution The webcam is no longer recognizable on my mac. Also, the keyboard lights come on when I first start up or open my MacBook but then shut off. No matter how often I push the buttons to brighten or dim the icon image no longer shows on my screen. I went to “System Preferences” > “Keyboard” and there was no option for the keyboard lights. One forum mentioned that the Keyboard light and the Webcam are connected at the same spot on the logic board....

Chosen Solution I have a ROG G751J that I connect to a monitor with a VGA cable, but want to change it to a HDMI port to Display Port cable. When I connect the new cable, there is nothing on the monitor, waiting for a VGA cable to connect. Is my Dell monitor too old?? There are really no monitors that are too old for external use. Serial terminal monitors that have a serial interface, that’s about it....

Chosen Solution I have a “Commodore 64” with a 5 pin video connector, (serial # begins with P0) and a “Commodore 64 Personal Computer” with an 8 pin video connector (Serial # begins with CA). I have both a Commodore 1701 and a 1702 monitor, yet I cannot get the one marked “Personal Computer” to display properly. (The screen appears jumbled) The plain 64 displays on both units, although the color is not always there....

Chosen Solution I have disassembled cleaned and reassembled my Xbox and I am getting an error code 01 while getting the blinking red and green light and getting the tech screen, what is error code 01? Hi Joshua! An explanation of Error 01 can be found here. This question has also been asked before here on ifixit: Why is My Xbox showing Error Code 01? Ben You got loose wire,my problem was I didn’t push DVD drive wire in all the way....

Chosen Solution IF TRIED EVERYTHING in it wont work what should i do Patricia Eagle since you did not give us your exact model number, use the general steps for the RCA Android tablets reset. See if that works to get your tablet started. This does assume that you charged the tablet and that your battery holds a charge. Hold the on-off button down and the volume button UP at the same time....

Chosen Solution My phones charging port wont work Try change port with know good know one …………. Who know change port, he/She can change easily in 30M-1h…

Chosen Solution i have a very old gameboy advance sp that’s been passed around the family for several years. after leaving it charging for several months we found the battery expanded to nearly twice it’s size. good thing we caught it so we could unplug the console and remove the battery. the battery case flew right off! we took off the bottom casing to check for any damage or warping, and so far everything looks okay....

Chosen Solution anyone know that where is the lumia 520 microphone located? is it soldered to the motherboard? can i replace it by myown? can someone give me some information?thanks ! @kaye it is soldered on the board. If you know how to solder and have a rework station you can do it. Here is a decent video that will help you with that.

Chosen Solution I am getting a Fossil Q Explorer Gen 3, and it’s being sold at a low cost because the charging ring has fallen off the back (apparently a common problem with watches that have charging rings). The ring is still intact and fits into the groove. I don’t know how charging rings work exactly, but is it possible to use hot glue to stick it back in? If so, what glue brands are conductive/ water and sweat proof?...

Chosen Solution I have a 2012 6.7L Ford F-450 with the error code U0418. How do I resolve this code? @jeffwashington OBD code U0418 is triggered by Invalid Data Received From Brake System Control Module. Most likely cause is the Brake System Control Module. I’d check with a dealer first to make sure that this is not covered under any kind of warranty.

Chosen Solution I am trying to remove the speaker for a battery replacement, but I don’t see any screws to the left of the speaker. Just taking a wild-a$$ guess here, but did you remove the tape covering the two screws to the left of the speaker? Take a look at Step 24 of the iPhone 11 Lower Speaker Replacement guide.

Chosen Solution The phone does not work definitively what is the solution and what should I do to fix it What should I do waiting for the answer with thanks and appreciation

Chosen Solution I had went to work and my cpu was on but it would go to sleep and when I shook the mouse it would come on but one day I came home and the screen stayed black but you could hear sound the cpu was getting very hot to the touch too I assume that monitor is the problem here. Before going furthermore and troubleshooting confirm if it is just the monitor that does not working....