Posts

Chosen Solution I’ve torn down several PS4 Slims for the purpose of cleaning and testing. I’m currently working on my first CUH-2215, trying to take careful note of the differences I see. I’m at the point seen in the first picture. I was trying to take note of the thermal pad locations since they sometimes stick to the metal plate instead of the chip. It looked to me like one was unaccounted for (I was wrong), so I flipped it upside down to see if what I thought was an errant pad would reveal itself....

Chosen Solution What setting do I use while taking sport pictures with movement. Example like basketball pictures. @deniselitmer ,Denise Litmer, With out knowing model and # it is hard to accurately answer as we are not sure what options/settings are available to you. I take it that your camera does not have sport mode, sports mode is a quick setting to adapt the camera with these typical settings: Nikon adjustments/settings for sport mode....

Chosen Solution My display was working good but touch was not working properly how can I change the touch but it has avalibility to change only glass not touch I think it has to be changed along with the screen, screen and digitizer together.I have issues replacing just the screen, better get a display with frame

Chosen Solution I need to ask a question in regard to my NP-N145-JP02US i need a new charging chord for it and it would work was wondering how i can get one? may be this https://www.ebay.com/itm/AC-Adapter-For-… Please post which country you are in. We are world community!!!

Chosen Solution Galaxy Grand Prime said battery temp too low but still charged, but then a piece of my battery chipped off and I can not connect to wifi Ryan smith that does not sound like an antenna issue. You do want to post some pictures of what happened to your battery etc. This sounds like some more damage other than the antenna. Use this guide Adding images to an existing question for that....

Chosen Solution I dropped my Infinitec tablet, but it still seems to work, but the problem is that the screen is black and won’t respond. i still get notifications for incoming messages and emails but can’t view them. What can I do to fix this by myself? @neezynae the black screen after it has been dropped would most likely be a bad LCD. Like @jayeff already asked, we would need to know the right model for a more detailed answer....

Chosen Solution why would my rear running lights stay on when the truck is shut off? Hi @kergan29 , Are you sure that it is only the tail lights and not the license plate lights and the front parking lights as well? Here’s an image taken from the 2003 Tundra service manual and it shows that all the above mentioned lights are on the same power feed from the integration relay....

Chosen Solution I have checked my unit with my other docking system and I have the same intermittent sound, how do I fix it the dock to put the 1.3mm into is broken off inside

Chosen Solution Hello I made a cappuccino and I think some water spilled to the clock and is now foggy how do I fix it ? Update (10/08/2022) Can you see the images? not sure if it got uploaded properly Update (10/08/2022) Did these images come ok? Hi Unfortunately there aren’t many options You could leave it in a very dry environment until the moisture drys up Or you could take it apart and see what the issue is from the inside(eg broken seal) Unfortunately there aren’t many guides on taking it apart so if you decide to take it apart I can try and help guide you if you would like Hopefully this helps Any questions please ask Thanks:-)...

Chosen Solution When I try to start my truck for the first time at any time during the day, it will not fire until the 2nd-4th crank. Often when it does finally fire, it barely catches. However, once it does start up, the motor runs perfect…automatic choke kicks in, no sputtering or other indications of issues. I don’t know if this makes sense or not, but it feels as if the fuel has evaporated out of the injectors and so it takes a few cranks to get it to the cylinders and flowing again....

Chosen Solution Accidentaly spilled liquid on the track-pad and while i can still move my cursor it won’t left or right click with either the buttons or the trackpad, wondering if this will fix itself after a few days or if I should take it in and get it fixed You should get it fixed, depending on the liquid spilled it could make the internal left/right click buttons freeze up. You can also fix it yourself, I am not familiar ASUS laptops but most manufacturing companies provide repair manuals....

Chosen Solution Alright can anyone help me out I have a cheapo tcl 65 in tv where the picture cut out. The backlight still comes on and works I have sound I can here it able to click through the menus the picture just cut out. I read online that it’s the t con board so I replaced that and no dice so I figure I’d replace the main board and power supply and that DID work for about 5 min I had it all laid out the screen came back on I was like sweet I fixed it then I hung it back on the wall turned it on it came on for a few seconds flickered and went out again I don’t know if the means I just have a short somewhere or if I fried my new parts I just put in or what I’m kinda at a road block here....

Chosen Solution Hi, I have been working on this for a few days and after trying a lot of guides, I am at a loss. I built a new PC and got rid of my old Laptop. I kept the internal hard drive and have been using a SATA USB connection to access my files until I could transfer them over. Until recently it has stopped responding and I can not figure out why, and a lot of the troubleshooting guides online result in the methods/programs etc not responding....

Chosen Solution I have three of these monitors and two work perfectly. This one displays vertical bands as shown in the image. It seems like it should be easily fixable - some kind of a connector or cable issue. Anyone have any ideas? john this could be cable issue (check the ribbon cables as wall as the thin cables going into the panel and check for small tears etc. Most likely this is a failed panel due to bad LCD source driver IC’s....

Chosen Solution I have 65 inch Samsung 65NU6900 and now it has colored vertical lines in the right side of the screen. Please help me to fix the issue. It might be the board or connection issue. Thanks There are some copper bands the run from the main board to the screen that have small black blocks soldered in the middle. Heat from the tv can cause the blocks to have bad connections....

Chosen Solution I just replaced the camera and lightning/headphone plug. Now the screen comes up perfect, then within a few seconds starts getting vertical lines, then starts acting like I’m touching it and performing actions. I’ve unplugged and replugged the screen connectors several times, and can’t see anything in them even with 4x magnification glasses. Any ideas? When I took apart the phone, the screen had been glued down with white and with black sticky stuff, felt like butyl....

Chosen Solution Samsung C9 pro display has been damaged. Need a new one. How much it will cost. mayank2k753 it’s a Super AMOLED screen. It is not cheap. The replacement cost for the display assembly is around $150 USD. It will depend on where your get it from and where you are located at. Tiền thay màn hình ssc9pro là 2.500.000 vnđ

Chosen Solution When ever I plug my mouse into my computer the mouse doesn’t connect but it also shows a warning on the bottom right corner of my computer saying “Power Surge” on any computer. What do I do? Thank you for your time. Eduardo, Generally that error message appears when there is a short circuit inside a USB device. Due to the cost of repair compared to the price of replacement mice I would recommend for you to replace it....

Chosen Solution Hi all, I transfered all my data from my iPhone 4 to a iPhone 6. Everything went well and the phone is working fine. After that I rebooted the phone and the ‘Welcome screen’ was back. It says the phone is installed correctly, you can use the phone etc. After that I have to choose a WiFi connection. And than the phone works again good. This happens everytime when I reboot the phone....

Chosen Solution What to do if I cnt remember my start-up screens, pin lock? Thats unfortunate… you will have to hard reset your device in order to be able to use your device again. Hard resetting your device will erase all of it’s data, however it is the only way to remove the password. https://www.hardreset.info/devices/motor…