Chosen Solution I’ve got a 13" Mid 2012 MBP with a 2.5 GHz Intel Core i5 and 4 GB 1600 MHz DDR3 of memory that’s just not getting the job done anymore. It’s slow. It spent 3.5 years in a humid, tropical climate as my daily laptop, and has basically been sitting in a desk drawer for the last two years (in a temperate four-season climate) since then as it’s been demoted as my backup laptop....
Chosen Solution i can’t seem to find any on goggle any ideas where i can get one? Ok, so you can try to repair the damage yourself, or if pieces are broken off and missing you will need to replace it. You could also replace the whole pad and buy a new one, if it gets too confusing. Maybe try local technology shops such as radio shack for their opinion or advice....
Chosen Solution I need to replace my Dell Inspiron 7577 battery but I can’t find the it in the internet, does anyone knows where to buy it? (iFixit.com doesn’t have the Dell Inspiron 7577 so I had to choose the 7567) Look up Dell inspiron 7577 batteries online and go to shopping. You have tons to choose from but make sure they are OEM batteries. Please approve this, it would be much appreciated and good luck!...
Chosen Solution At least on eBay, the Nivo Lite is one of the most common machines. One of mine is signaling a red light. Do you mean Nuvo Lite? If that’s the unit you are describing the manufacturer is Nidek Medical. If the unit is signaling red it could mean a failure somewhere in the system. Here is the link for the resources section. Download the Service manual for your model which is the Nuvo Lite....
Chosen Solution I’ve got an iPhone 8 without vibrate function. Replacing the Taptic Engine didn’t work, and the replaced part works perfectly when tested in another device. What else could be the problem? I even replaced the flex cable that connects the logic board to the Taptic Engine, to no avail. Any ideas besides it being a problem with the logic board? Possibly a damaged logic board
Chosen Solution This a short description of the issue, the battery LED blinking orange for 3-6 sec then it stop blinking for 1-3 sec and changing to green for 1 sec and repeating like a loop, If I press the power button the loop stop and the battery LED change to green for 1 sec after that the loop repeat itself. I checked the power adapter, battery, battery connector and the DC power jack they all ok....
Chosen Solution As mentioned in the description everything is in perfect working order but the picture just seems to very very dim or dark. I have taken off the backplate and can see the lights shining through the back so it is being backlit. when I have ceiling lights on in my room you can barely see it. with the lights off it is a little bit more visible. and i am able to navigate the menu....
Chosen Solution We have the same problem. T.V. was on this afternoon and it suddenly went off. I thought my husband shut it off. The cable box stayed on. The red light on the T.V. blinks 10 times. Help please! Bonnie, it is important to know if it blinks when you plug your TV in or if it blinks when you turn the power on. The power LED blinking ten times is indicative of issues with the voltages on Sub 5V, Main 3....
Chosen Solution The Roomba comes off the charger moves a few inches - stops- beeps and sometimes the red triangle flashes. I have checked the battery and it is holding the charge. I have moved the Roomba to difderent locations and pressed start and the same thing happens. I have cleaned IR sensors. What is going on? Also: Where can I get a copy of the service manual for Roomba 700 Series vacuum?...
Chosen Solution Good afternoon, my three year old daughter put some wax on the screen and I had to clean it off. I applied a small amount of pressure and shortly thereafter, this showed up. Anything I can do? Shane Cutler that looks like a TAB error. The bonding of the very thin ribbon cable entering the LCD panel may have come off, corroded or broke. You will have to remove the back cover and make out the TAB, the apply some pressure to the thin ribbon cable at exactly the point where the lines appears....
Chosen Solution Sorry this is going to be long but I just wanted to explain the whole thing to not leave any room for confusion. A couple of days ago I was shaking a water bottle with a vitamin C tablet inside (stupid, I know) near my system and the cap burst open and sprayed my system’s keyboard with tiny drops. I quickly cleaned up everything and thankfully most of the drops were on the keys not underneath except for the space bar which was a little bit stuck so I quickly popped it off and cleaned the area with a cotton swab and put it back on....
Chosen Solution Probably phone got a bit of water through the scratches in the screen, and i’ve got userspace watchdog timeout problem the log files is saying something like that {“bug_type”:“210”,“timestamp”:“2022-12-06 13:25:03.48 +0300”,“os_version”:“iPhone OS 13.3 (17C54)”,“incident_id”:“2CADE8A7-61C4-4F43-B8D4-BAA1BD14762F”} “build” : “iPhone OS 13.3 (17C54)”, “product” : “iPhone11,6”, “kernel” : “Darwin Kernel Version 19.2.0: Mon Nov 4 17:46:11 PST 2019; root:xnu-6153.60.66~39/RELEASE_ARM64_T8020”, “incident” : “2CADE8A7-61C4-4F43-B8D4-BAA1BD14762F”, “crashReporterKey” : “f3212b3e602ab2d373db1407d020ca8d52d6e226”, “date” : “2022-12-06 13:24:54.94 +0300”, “panicString” : “panic(cpu 3 caller 0xfffffff016b99bf8): userspace watchdog timeout: no successful checkins from com....
Chosen Solution Hey all, When turning on the power, the macbook pro screen’s white page has many vertical colored lines and will not display anything else. Eventually the many multicolored lines fade and a much thicker conformed line in the middle of the screen develops and does not disappear. The macbook pro is will not bypass this screen. Thank you. -Eddie have you tried reconnecting the cable
Chosen Solution I have a problem with my Nikon coolpix p500, recently I put my camera by a window and, it ended up getting leaked on right on top, I tried to get all the water out and let it dry, later on I tried to see if all the water got out when I noticed there was water in the lenses, almost like condensation, how do I fix that?...
Chosen Solution I have a Keurig B150 and I keep getting error message water flow interrupted after removing and replacing the cold water tank. remove tank….empty water and refill…..unplug for 5 mins than attach water tank and than plug back in This tip worked for me but I didn’t wait 5 minutes. Thanks BaylorBears1982.
Chosen Solution I want to upgrade the processor and graphics card + add 4gb of ram (In order to play better games with better settings) how do i do this? and what can i upgrade to (Or should i just buy a new one) Follow this tear down on iFixit. iMac Intel 21.5" EMC 2428 Teardown Suggested upgrades are: • Upgrade the graphics card if needed • Upgrade the RAM • Upgrade to either an SSD or a Seagate SSHD hard drive....
Chosen Solution I’ve been doing some research but can’t seem to find a charger that specifically goes to this laptop. I don’t want to run the risk of ordering a product that doesn’t work or having to pay for the expensive one on the Toshiba website. Would it be possible I can be provided with a link to a seller or brand that is compatible? If you just search eBay for “Toshiba Satellite P855-S5312 charger” you should easily find one that is suitable....
Chosen Solution I had done laundry a few days ago but during the night the washer started beeping and flashing F and then 9. There are no clothes in it but the drum is full of water. What should I do? Hi, What is the model number of the washer? It may be that the drain pump is clogged that is why the tub is still full. You may have to bail out the water as best you can and check the pump and hose etc for any blockage....
Chosen Solution how about What is the capacity of 11020952991 Hi @ CPR APPLIANCE REPAIRS, The owner manual doesn’t specify the capacity in cu. ft. It only gives examples of what can be placed in the machine. Here’s an image taken from the manual that may help. (click on image to enlarge for better viewing)
Chosen Solution The screw near the right hinge by the power button, in the bottom of the case backed out. Due to this, excessive stress is being placed on the hinge. i need a replacement screw. What is the thread size? All 10 screws on Bottom Case are of the same size: M2.5*12L
