Chosen Solution Have a customer phone that shuts off after boot when the lock screen comes up. The display go black and the status led flashes slowly violet? Have anyone seen anything like this? FYI Customer states when he used a damage cable (well..) while charging sparks and smoke came out from cable… I have tried charging the device (with a good cable) and i get a vibrate indication but nothing more....
Chosen Solution I have tried every possible way to instal Windows 7 X64 bit on this system, but it ends up with black screen only, I tried to make pure EFI boot it booted but it got freezes up after Windows is loading files. Windows 8 and 10 boot and install successfully but it has problems with the Nvidia 9600m driver, it gets stuck in boot loop after this driver installation, tried EFI shell tweaks with ReFLT, nothing worked....
Chosen Solution I’ve reheated the iOpener many times and re-applied many times (timing to make sure I’m a little over the 2 minutes suggested). I also used a heatgun until the back was too hot to keep holding my hand on it (and then of course stopped at that point). No matter what I do with the suction cup (I bought the full official repair kit) and spudger+picks, I’m not getting even a little separation....
Chosen Solution Is it possible to unlock my old iPodTouch but without loosing my data? No. But you should have your data backed up on iTunes. I haven’t used it for many years and theres no backup on iTunes. Is it certain that i cannot retrieve my files?
Chosen Solution My PS3 afterglow controller has always worked great but recently the USB drive just stopped connecting. Now whenever I plug in the USB to my system it just continuously blinks. My USB ports are working fine because I can still charge other controllers and the actual USB to the controller connects perfectly fine to my PC just not my PS3. So I have no clue what the issue is and I don’t quite want to get a new controller yet because it seems like this one still works, it just isn’t connecting to my PS3 right now....
Chosen Solution I have a Plantroonics RIG Surround headphones and knob, but for some reason only on my laptop (Lenovo G50-80) I can’t get both speakers working in the headphones (only left side and microphone work) when plugged with the USB cable that is meant for PC, but it work perfectly on my sister’s laptop (I think it’s an old HP 15T, has an i3 5005U), are my USB ports underpowered?...
Chosen Solution I have been using this camera quiet a bit over the past few years. the other day I started having problems with the vibration reduction. The lens kept jumping side to side while focusing on my subject. You could hear something inside the camera making noise while it did it. Focus stabilized when I turned the vibration reduction setting off. That is why I knew it was the vibration stabilizer....
Chosen Solution I have looked on here for a guide but no luck Windows 10 tells me there is another ram slot available so I would like to install another 4 GB of Ram into the computer although when I looked in the computer I only see 1 slot and I am not sure about if it is on the other side or not of the computer for the additional ram slot....
Chosen Solution Dear sir, I have created the web application in PHP and I have TM-T82 thermal receipt printer . I want to open web application in android phone and take print using TM-T82 . Is it possible to get auto print from android phone directly to thermal printer. Hi, This web page may be of interest to you. It is from the SDK for Android link in this page
Chosen Solution Hi iFixit-community I am currently setting up a repair division in my phone shop and I was wondering what equipment is necessary for everyday phone-repair. I have only done small repairs myself like simple screen-replacements or battery replacements on old iPhones and some Android phones. I am aware that of course, you need a good driver kit with precision screwdrivers and all that, but in certain kits and in the Tools Store I’ve also come across things like microsoldering-kits, demagnitizers and other soldering/wiring equipment....
Chosen Solution I have a pretty cracked rear cover on my s10e. I am looking for the best possible way to change it myself. Some of my worries is that the sucktion cup will pull glass bits or not get enugh grip. Could i put tesa tape on the glass and then the suction cup? Any other solutions? Is it too risky to doo myself? Thanks in advance :) I put clear packaging tape to stop glass on iPads....
Chosen Solution I know road bikes need like 100psi, but since this is a mountain bike what should I pump them up to? The recommended psi for the tires on this bike is 40-65 psi. This can be accomplished using a standard manual bike pump or a compressor with a bike attachment. It is important to check the psi of your tires after inflating them. Look on the sidewall of the tire....
Chosen Solution It dropped it and it cracked. I tried to turn it on, but the screen was black with multi-colored lines. I can also her it vibrate when messages come in. Please HELP ! You cracked the lcd, your going to need a new digitizer/lcd. It’s a easy repair and you can pick up the part on ebay for like $160 usd so its pretty cheap repair compared to the price of a new 5s....
Chosen Solution Last 2 days ago I connect charger to charge tablet ( it was 70%) then after an hour checked again and whoa! 30%!!!!!! Check battery usage and noticed although I connected charger cable but battery drained inverse! Unplugged it and try another Asus 7 charger and same problem, Battery goes off after 0% and when I plugged again just flicker screen and nothing happend, I tried cleaning USB port, changing cable and charger and done instruction of nexus Google website ( Press power + volume and bluh bluh bluh) even remove battery and charge it separately with power supply then put it back again, tablet switch on again and andrid comes healthy but again it shows charging!...
Chosen Solution My phone has dropped a few times but still it worked properly until one day when my phone suddenly went off and i tried every method to get it on other than factory reset. Please help me with this problem … According to your sounds, phone is dead now. so you should check below steps Change the battery and check, if you found same issue Check the micro USB port Is there any damages?...
Chosen Solution When the transmission gets up to temperature it shifts through the gears too fast. incorrect fluid levels or leaks, try replacing the fluid or inspect for any leaks or misting, worn or damaged parts inside the gearbox could also cause it. depending on age, mileage and how the cars driven may need inspecting inside.
Chosen Solution The reflector mirror shattered and I need to replace it, but don’t know where to buy this part. As other companies ask a fee just to send it away and then the cost come for the repair. I want to try and cancel the extra cost by doing the repair myself. Can you help? The mirror is a custom part for your camera. Often they are epoxied to a frame and the whole part needs to be replaced....
Chosen Solution I got my phone’s lightning port replaced and now I have terrible cell reception when I’m outside and no signal at all at home Hi Quinn. The iPhone SE 2020 has two network antenna cables that connect to the logic board. One of these antennae is housed in the replacement flex cable that is used to replace a lighting port. It is possible that this cable is damaged, defective, or not properly connected to the logic board during the repair....
Chosen Solution The Samsung 60" LED TV UA60F6400ARXZN TV was bought in the Middle East which is why the number is different from the UK models. Recently when we switch the TV on the screen remains blank (with a dark blue hue in the back ground) but the sound works and all the menu functions seem to work. Just we cannot see any picture. This problem has been coming and going for the last few months but recently there is no picture what so ever and we have tried to turn it on and off a number of times with no success....
Chosen Solution Hi, I have this iPhone 6s plus that has fake charging . I replaced TriStar already with no change. I noticed that when I plug in the cable , and afterwards I plug the battery it starts charging ( but stops drawing amps after a minute). If I have battery in and then I plug cable it is fake charging. I tried brand new battery and it’s doing the same....
