Posts

Chosen Solution So I messed up and got some water on my phone, and Samsung will not fix it because I tripped the KNOX counter (really stupid of me since I didn’t even keep it rooted for more than a few minutes) I went to the samsung store and they “said” I needed to replace my motherboard and LCD for an amazing price of $725. The lcd screen is fully receptive to the S-Pen, but will not work when I touch the lower portion of the screen with my fingers ( the rest seem to be fine) I checked for Liquid damage from the simtray indicator and that seems to be fine....

Chosen Solution I need a replacement glass for the front It shattered. How or where do I get one? Sorry for the late reply, I believe that this is what you’re looking for. https://www.amazon.com/Replacement-Scree…

Chosen Solution So, I read the guide for replacing the speaker assembly, however have not found any replacement speakers for the pixel 4a, so I am wondering if any of y’all know where I can find them, since my Pixel 4a speakers are damaged. Hi, Here’s a link to one supplier The cost is about $US26.00 + shipping

Chosen Solution My question is simple, I’m just wondering where is the water damage indicator on Galaxy Nexus devices. I’ve already red the teardown guide but I didn’t find it. Thanks. It seems there is a water indicator on the rear inner frame. Its a small sticker with blue X’s. There’s also one on the battery - pink X’s. It seems that the X’s disappear when you get it wet?...

Chosen Solution Model #: le48fhdf3300ztaa standby light turns on but no sound nor picture where can i get a service manual or some help with this unit. thank u Have you called TCL support? Mine has been restarting a lot and unable to detect any wireless network. I called TCL and they are going to replace it.

Chosen Solution Whenever the bottom right of my screen is supposed to display a black background/application/image, there is this weird faintly glowy green splotch. However, when other, lighter colors are displayed (really everything except dark grey), there is no issue. Should I be concerned/should I do something to keep this issue from getting worse? It’s not a matrix-y green, it’s really more of a really faint glowstick green. @ani2876 could be a backlight bleed issue or similar....

Chosen Solution When I load the dart after shooting for a while, when I reload one pops out. When I push it in, it pops out again! Sometimes it’s all of them. Is it a problem with the spring? I have the same issue. What I do to resolve it (also for accuracy purposes) shoot one dart at the top section at a time. This might help you til you get an answer to fix it....

Chosen Solution The washer starts to agitate as soon as you start a cycle without letting the washer fill up with water. Is there some sort of reset button or procedure? First thing to try is to unplug it from the wall for 10 minutes to allow it to reset. Plug it back in and see if it throws any error codes and let us know.

Chosen Solution manually pressing the set top box solves the problem temporarily, again after starting again the message flashes again in a box in the center of the tv Hi, What is the model number of the set top box? When a set top box is connected to a TV, the set top box is in control and if you try to use the TV remote control to alter the TV settings (except input and the TV power on/off) you will get the message on the TV screen All changes need to be done using the set top box remote, but they will only affect the set top box not the TV, e....

Chosen Solution Hi, My 2017 MacBook Pro without Touch Bar (A1708) has a problem. I can’t use anything because I have 2 thunderbolt ports and they don’t work, only one I can use for charging. Within the information about system I can’t see thunderbolts and every time I power on my MacBook I get a report ‘‘USB ports was disabled’’ I tried SMC restart and don’t work. Do you know how I can repair them both?...

Chosen Solution Fixing a friends Pixel 2 XL, had a cracked screen with no touch so I replaced the screen with an original graded screen and the touch still doesn’t work. Tried a factory reset but still nothing, does anybody have any ideas? First,many screens sold as original or oem are fake. They are genetics and the sellers on eBay or amazon lie. This doesn’t mean it won’t work. Did you disconnect the battery prior to repair?...

Chosen Solution My daughter dropped her ds on the floor and now it will turn on and then immediately off. I tried charging the battery and even replacing it with another good battery from another DS we have, but still the same problem. The right most light turns green when powered on for about 1 second but then shuts off Unfortunately it could be a variety of problems. Fortunately they all have workable solutions....

Chosen Solution i will turn on my flat screen tv and it will show black then I will turn it off then back on it’s black then I unplugged the tv then turn it on then few minutes later it’s on @shermeeker1267 without knowing the exact make and model of your TV we can only guess. This could be anything from a bad power board to a bad main board. Errors like this “ I unplugged the tv then turn it on then few minutes later it’s on” are usually not resolved if it is caused by bad capacitors....

Chosen Solution This is what it does when I turn it on. I have factory reset it and nothing helped. What should I replace or is it not worth the time and money? Model 40S305 it could be a problem with one of the led arrays (strips), like a shorted led. If its not that, its gonna be a bad component in the led driver circuit on the power board. you can buy a new power board for $35 the led arrays will run you about $30 https://www....

Chosen Solution recently bought tv, almost 3 months old unfortunately past its 30 day return k so the issue im having is : ill be watching a movie or YouTube, gaming, etc , and the screen will go black , sometimes i can get a few hours of viewing or sometimes 3 mins the audio keeps playing, i can switch channels and hear them just cant see them. i have tried unplugging the tv and leaving it unplugged week , switching hdmi ports, tying it on other tv, computers etc....

Chosen Solution My AcuRite 02032 outdoor sensor has started to use batteries about every month. Hi, Are you using Alkaline or Lithium AA batteries in the sensor as specified in the user manual (see p.22) or the cheaper Carbon Zinc variety? The issue is with the temperature sensor board…it wears out over time. It will drain batteries in a few days. Fortunately, Acurite sells a replacement board “AcuRite Iris (5-in-1) Temperature and Humidity Sensor Replacement” it is a cheap fix ~$13 + shipping....

Chosen Solution I have a 2000 Yamaha VStar 650. I can’t get it to turn over. We have tested everything electrically and found a few things so we replaced the ECU, spark coils, spark plugs, combo relay, inspected stator, tested stator according to manual. Compression was great. Output from the stator was in spec. The trigger wire from coil to ECU has continuity and no grounds. We are getting weak spark in front cylinder and no spark in the rear cylinder....

Chosen Solution I live 2 hours away from an apple store and can’t burn my day going to them. Are there any reports of apple still bricking phones through updates ? No, and with batteries never heard them bricking phones with iOS updates.

Chosen Solution I have a WTW4816 Whirlpool top load washer. I’ve changed the lid switch and cannot get the machine to work. Before I changed the switch, it would not start. I got the switch installed and now it won’t start and the locked light is flashing. I’ve run the diagnostic and the F5E2 lid lock fault error is what comes up. I have no idea why a new switch did not solve the problem....

Chosen Solution My washing machine works great most of the time, but every few times it will leak water everywhere. I’ve removed the outside walls and watched it through several cycles and the problem never replicates while I’m watching. There are no visible hose leaks. I assume it is something like a pump or a valve that is going bad, but not completely out yet. I was hoping someone could direct me to the most likely cause before I randomly started replacing things....