Chosen Solution I’m doing a motherboard swap between 2 new 3DS XLs (US and Japan) and as I have done shell swappings on previous 3DS and DSs I was used to the old ZIFs so i opened the tab to get the wires out, but after the fact, I read on another question here that I’m not supposed to open the tabs on those, as they dont seem to be able to snap back....
Chosen Solution I recently removed my wifi/Bluetooth antenna in my iPhone 5s. While prying it out of the phone, the gold circle on the bottom left edge of the antenna broke. Here is a photo of the part. http://www.fixez.com/media/catalog/produ… It is a very fragile, thin piece of the part and seems as if it is only gold coating. If this part is broken, will it interfere with the circuitry? Will it cause the antenna to not work altogether?...
Chosen Solution I’m looking to water cool my xbox one all digital can anyone tell me the best water block for its cpu? I don’t recommend water-cooling your Xbox as it can be a risk and it can be hard. The stock cooler already in it should be ok. If it’s overheating, try to clean it out, or re-apply the thermal paste. As far as I know, you will have to custom make your mount....
Chosen Solution Picture of the bolt Thanks! @xterno50 ,Roberto , 5 node security head/Security (Temper-Proof) Torx Plus. Depending on the size and how tight it is, you could try a #1,2,3 square(Robertson) screw driver or purhaps tight fitting slot screw driver as seen in video below. If not coming easily stop before stripping and perhaps borrow or purchase the correct bit or driver. Video below may help. Good luck. I hope this helped you out, if so let me know by pressing the helpful button....
Chosen Solution I am about to replace the HD in my PowerBook due to the factory one dying. I am currently shopping online and am coming across lots of different types. Does anyone know what type of HD I need? (for example ATA, SATA, etc…) My system is a PowerBook G4 Aluminum 17" 1.67GHz (High-Res). Thank you. The drive in that PB G4 is a 5400 rpm Ultra ATA/100 (ATA-6) as per mactracker....
Chosen Solution Where can I buy motherboard… Searched iFixit iPhone SE… :( Found that iPhone 5s motherboard not good for iPhone SE… I need to buy it asap You can always search on for example ebay.com for broken phones (where the screen is broken but the logic board is still OK), buy them and then take the working motherboard out of them and transfer it to your phone. Did that when I searched for a Xperia Z2 motherboard....
Chosen Solution Hi! I spilled tea on my mac air, and dried it for 50 hours. Then i turned it on with the power in, and everything seemed to be working fine, exept when i take out the power it shuts down. I think the battery is damaged. What can i do? Also my space is stuck, and some of the letters are hard to push. My mac is only four months old, and i dont have insurance....
Chosen Solution My Fairphone mircophone stopped working. I checked on the Fairphone repair section which recommended taking out the microphone module and replacing it, which I did. Now, when I start the Fairphone I get the “Team Win Recovery Project” and I don’t know what to do next. No answer from here. Hmm. I Googled the Team Win Recovery Project, eventually found an image file (.img) of the same version and that had to be copied onto the phone’s microSD card....
Chosen Solution The till is a sharp ER-A420 in a small hotel last night it just stopped working it registered one item but would not let me register another one the only buttons that work are the journal and receipt switched it off over night but still displaying same item as last night can you help me please @paul66 you may have to reset your register. Try this Press and hold the “Journal Feed” and “Receipt Feed” keys as you turn on the cash register....
Chosen Solution Can the slot where my charger goes be replaced easily? The phone works fine, just can’t charge it any longer without removing the battery and charging in another similar phone or battery charger. Not sure if the pin slot can be replaced cheaply and easily to see if the phone is worth keeping. Also, trying to get the pictures off of it and noticed a micro sd card slot on the side....
Chosen Solution The wifi button is stuck, so it turns on and off continuously. I tried to search for the solutions. People mostly recommend to change the button, as this is a common problem. Are there any other ways to solve this? And where can I get this button? Are there some repair centers by my location? (Russia, Kazan) Would GoPro officials count this as warranty case? Market gave 1 year warranty, now it’s 14 monts since I bought it....
Chosen Solution Hi, I buy “ new “ iMac a1145 and want to keep is as a fully working legacy pc. I cannot found anywhere on web, should I change the thermal paste? There is no procedure to change cooling paste on ppc cpu/gpu. It shouldn’t be done each few years as it is suggested on each new intel based computer? Maybe you can help me also to check if this is required with some software, which check cpu temp and throtteling on Mac OS Leopard (10....
Chosen Solution Does anyone have any actual experience with using an Anglebird SSD drive? https://www.angelbird.com/prod/ssd-wrk-6… It does have TRIM support which the other mainstream drives do not appear to have. I am currently using an 512GB X400 Sandisk SSD as my boot drive on a 2x 2.93 GHz Quad-Core Xeon. Flashed to 5,1 running 10.12.3. Recently added a 4 port USB3 PCI card. http://www.pro-tools-expert.com/home-pag… @danj, @reecee Next I’m looking at just how much of a CPU upgrade to go to (and what I can afford, a bit pricey at $1,785) 12-Core 3....
Chosen Solution Hi, i have an Imac 21.5 / mid 2011 / 2,5 GHz Intel Core i5 / AMD Radeon HD 6750M 512 MB and i am planning to upgrade it. I want to put an ssd Samsung 860 EVO 500GB behind the optical drive, change the cpu with the I7-2600S, the gpu with AMD Radeon HD 6770M and upgrade the ram at 16gb. The first question about the ssd is if i need a thermal sensor although i am going to connect it to an other sata port in the board and keep the hdd in place....
Chosen Solution Hi all, Looking to upgrade my iMac. The wife bought a new one and accidentally deleted the OS High Sierra so it now has the flashing folder with a ?. I was wondering what I would need hardware wise to upgrade it to make it a bit faster for using photoshop for editing pictures. Also, would I be able to upgrade to Catalina? I’m newer to the Mac world so please be gentle :) Thanks in advance!...
Chosen Solution Beatblock twins bluetooth speaker want power on. Charged it awhile, but it still want power on. I have reset, still want power on. Vickey Jones check your charger if you are using one to make sure it works okay. Next check your charging cable to make sure it is in good working condition. After that check the micro USB port and make sure there are no bend, broke, corroded pins or debris in the connector....
Chosen Solution Hello i bought a iphone x with very damage screen. (Only screen and black area) when i changed the screen, internal part seem normal and untouched. I can’t tell if the screen was the original one. When i connect a new screen (without front earpiece flex), the phone was in dfu mode. after restoring it with itune , a message was there iPhone couldn’t be activated because missing activation data....
Chosen Solution I have a GE GFE26JSMAFSS, when the water dispenser is in use, it dispenses water fine, but begins leaking about 30 seconds into use. The water is coming from the ice despenser hole. Ice machine works fine. Any ideas on what the issue wight be? Thanks very much Hi @adamenko Check the ice tray before using the water dispenser to see if there is ice (or the water level if not frozen) and then check it again after using the water dispenser and check if water has filled and is overflowing in the ice tray....
Chosen Solution So about 2 months after I replaced the iPhone 6 plus LCD this happened! http://oi66.tinypic.com/5v92j5.jpg It is static. The touch seems to respond as I can blindly hold the power button and slide to turn off but the image doesn’t change! Anyone encountered this before please help! I actually saw this for the first time today on a 6+, may not be the same issue though as this one would be fine but freak out periodically go all staticy then screen would go blank, I worked out that somehow the phone had overfilled the memory by 2....
Chosen Solution It said “printer failure,” but I don’t know what happened that caused it. It said, Printer Failure There is a problem with the printer or ink system. Turn printer off, then on. If problem persists, contact HP. Then I took pictures: Sure looks fine internally. Have you tried the troubleshooting steps on HP’s support site? My gut tells me there might be paper stuck in the duplexer. I’ve had that same model printer and it seemed like it was getting choked with paper constantly....
