Posts

Chosen Solution After printing a document I can not print another. When I go into active printers I am unable to cancel the document which has just been printed. Have used HP Print and Scan Doctor still the same. I would uninstall all the HP stuff from the system and reinstall the basic driver from them only. I find all the software bundled with these HP all-in-one printers to be very unreliable a prone to lock up their devices causing them to be unresponsive to the computer....

Chosen Solution I bought 6th gen ipad 3 weeks ago and now i want to sell it and buy 7th gen because of that extra gb ov ram, is it worth it? Pleas help with advise Other than a bigger screen, extra GB of ram, and the addition of smart connector, there are no significant improvements between 6th and 7th. I wouldn’t trade up. So in your opinion that extra 1gb is not much big deal?...

Chosen Solution Our fridge suddenly stopped making ice and dispensing water. As usual, I assumed it was the filter (near time to replace). I took the old filter and put a new one in, and nothing: no water dispenser (you CAN hear the valve working) and no ice fill. Many forums refer to the filter as being bad - we tried the new filter, and it does not work; however, the interesting thing is that the water comes out fine if you take the filter out....

Chosen Solution What is the hook drive for? or the socket right below it in the Manta set? Update (11/16/2019) The question entry page required a device before it would allow me to post the question. My question is actually just about the tool itself. What is the Hook Drive for, and also what is the socket right below it in the Manta set for? Hi @thepopp, I think that the hook drive is used for driving in hooks or eye bolts...

Chosen Solution So my phone had a problem that the body and screen weren’t connected,and I didn’t really care because I’m a lazy freak. So you could literally put a finger between them at the top of the phone but that is not the problem. Once I had the phone on my lap when it accidentally fell off to the ground and next thing I saw my phone is in two pieces, like the screen just fell off and since then I had it in two pieces the screen and the phone itself, I tried the mute switch it vibrated....

Chosen Solution i cannot enter the PIN. The touchscreen doesn’t work. Was kann ich tun, damit der touchscreen wieder funktioniert? Ich hatte mein Fairphone einen Tag lang nicht benutzt und jetzt funktioniert es nicht mehr. change your screen and i assure you positively it will work again :) I have sometimes experienced this problem. Sometimes, pressing the power button briefly to put the screen to sleep, waiting a moment, then re-awakening the screen, will have the effect of activating the touch screen....

Chosen Solution I saw someone else has written this question but the problem is, I don’t have have soldering iron as they asked. I do not know what to do and I have bought a brand new housing for it which will be useless if I am not even able to unscrew the first screw. I need help as soon as possible that does not involve any form of like technical tools and I am not very experienced at these things....

Chosen Solution Was this the first Laptop ? I believe this laptops release date was 1989, this laptop was not the first laptop made as the first laptop was released in 1981 if I recall correctly.

Chosen Solution i recently bought two different brands of fm transmitters for my phone and they static so much you cant enjoy.. one was from ebay and the other was a griffin from walmart.. what is a really good one or is the advice for the ones i have??/ I have a Griffin iTrip AutoPilot FM transmitter which I use in my car with my iPhone 3GS. I find that it works very well, I have no problems with reception or static....

Chosen Solution My machine is not producing carbonated beverages, I have had this machine for a long time and have had no problems. My CO2 tank is full and I can not determine any other issues. This problem could be caused by either worn out washers or a broken air tight seal. The main difference is that a whooshing noise will be heard if the air tight seal is broken. Try carbonating a beverage and listen very carefully; if the air tight seal is broken the noise will emit from the adapter....

Chosen Solution I opened my iPad to replace the digitizer. After opening it, I noticed that one black cable directly on the right side of the home button was loose. For a better idea of what I’m talking about, see pics. This cable is loose now and I can’t figure out where it was attached. Also, the iPad does not charge properly anmore. When I plug in the 30pin cable it doesn’t recognize that it’s being charged....

Chosen Solution The charging cradle on my Samsung Gear Live broke. Are replacements available or can it be repaired? Had issues with mine, little plastic snap opposite of button side of device. In the event of your Gear Live’s charging cradle breaking, replacement is your only option. Unfortunately, the charging cradle’s design does not facilitate repair, so that option is unavailable. It’s worth noting that at this exact moment there appears to be no way to replace it....

Chosen Solution Steam shot trigger onbunderside handle made a ‘click’ when using it and seems to have come detached as no resistance when use trigger and no steam shot - can i open the handle, seems its just off its mounting? Here is a disassembly video: https://www.youtube.com/watch?v=5KvCuZtU…. Perhaps the disassembly of your iron will be similar. But ultimately, you should be able open the handle it is just finding the right screws to open it....

Chosen Solution Hi. I accidentally poked the top mic hole instead of the sim tray with the pin. What an idiot! Mic still works fine, but does anyone have any information on the waterproof setup of the mic. Might I have compromised it? Is the waterproof device directly in the hole? Thanks Post a pic, is the waterproof mesh broken? hi thanks again. I tried what you said but I can’t see anything that says ‘pressure’ to test....

Chosen Solution Not only do I keep receiving “unfortunately Android stock has stopped working” I can no longer send pics or videos. Does anyone have a solution? Go into phone settings and scroll down to apps. Tap to select apps. Then scroll down to stock android, and tap to select. Then tap to select notifications. You will see 4 switches on that screen. Turn all 4 switches to the off position....

Chosen Solution Hi, my 2002 Nissan Frontier with ZD30 engine is cranking and not starting. I replaced the crankshaft sensor and still nothing. Looking for the cam sensor to see if it is bad. Please help! I was told that it might be the fuel filter or the clutch

Chosen Solution I replaced the lightning dock connector on an iPhone 5 everything went smoothly but when I reconnected and slotted the screen back into place there were vertical lines going down the screen. Can anyone tell me how to get rid of these lines? What causes them? How can I prevent it from happening in the future? Thank very much in advance It happens to me sometimes. What I do is, I check and see if the connections are placed correctly....

Chosen Solution Hi everyone, I just replaced my screen and everything is working so far, except that when I am recording a video, i have a random noise. (like a “TAK TAK TAK” every second) I uploaded a video : https://streamable.com/2y8ra Calling someone is working and is not affected by the issue (it is another microphone anyway) I tried to move some ribbons, tightened the screws a little bit more but nothing is working....

Chosen Solution Okay so i got my lovely macbook damaged by the rain the other week, and took it to a repair shop who said that it wouldn’t even turn on and is ‘uneconomical’ to repair. However when i got back i put it near a heater for a few hours and now everything on it works fine (apart from a little bit of screen damage but thats livable), the only thing that doesn’t work is the touch bar, i cannot use it and more importantly, it randomly selects buttons by itself every 20 seconds or so....

Chosen Solution water is running back into reservoir hunter, make sure that your needle valve is not occluded. check on here to make sure that the needle as well as the lines are good. My Keurig Elite When you turn on power button it makes a noise but nothing happens(it says Not ready but does not make coffee then cuts oft) does not pump water. There are 2 solenoid in the machine,one of them is not operating....