Posts

Chosen Solution I’ve looked around online and I’ve found several posts of users having this same problem, but I haven’t been able to find any solutions or even suggestions. I had a cracked LCD, replaced it with a new LCD assembly(whole front piece with glass\lcd\side button flex cable, etc. I made sure to move the vibraflex cable over from the old assembly to the new one, reassembled, and everything works fine, except there’s no vibration at all....

Chosen Solution Hey folks. I had accidentally spilt water onto my MacBook Air and had immediately closed it. After 24 hours of drying it I have found the system is able to be charged and everything to be working. I had then closed it for an additional 24 hours and realised that the screen would continuously flicker from full brightness to 1% brightness (can’t see anything at all). This brightness would last for Iess then 10 seconds before blacking out, it would require me to press something on the keyboard for the screen to activate....

Chosen Solution Okay so spilt water on my macbook while it was closed very little water, immediatly clean it off and turn it off and plugged it in while facing down. I tried to turn it on this morning and it wont power so i googled and i did what i wasnt supposed to do… Did i fry my system can i still fix my macbook or recover whats on there?...

Chosen Solution I have recently asked a few questions about my laptop that i just bought and it came with an android operating system. I am wondering what app to download so it will play disks or in my situation ..i can install windows cause i bought a windows disk but because it runs on android os it wont pick it up. It originally came with windows 8 @mdacey Download VLC....

Chosen Solution Hi everyone, I just purchased a used wii at a goodwill store, came with everything except controller. So my question is, I want to purchase a wii remote. What works with original wii, including remote and if you know anything about original wii let me know please. Thanks. I’m new new to wii.

Chosen Solution The new battery installed without problem. Charge, as received, was 65%. Thirty hours later, charge was 2%. I turned off phone and put it on the charger. Less than an hour later the charge said 100%. This does not seem possible. Or, is this a normal happening for a first charge after replacing the battery? Depending on the charger, usually 5-8 hours on a new battery is the standard charge time....

Chosen Solution What is the RAM chip model number? In the disassembly the metal sheild are not removed and the chip model number is still unknows. Thanks! not sure model number but think it is a 4GB LPDDR3 mobile DRAM module…and should be interchangeable from various mfrs parts. ?? best of luck.

Chosen Solution This is the top half left corner of logic board it has corroded but I am not sure what needs replacing I removed some corrosion with tweezers but it looks like it is too late for some parts Catastrophic This is it zoomed out the corroded part is the top left corner I tried searching up the hidden hub of schematics but I can’t understand them at all Before I removed most of the corrosion with bare tweezers it was looking like the gunk you find under your toenails...

Chosen Solution I heard it was a Torx. Upon further research I discovered there are different types of Torx. The screws securing the back of the Pebble Classic down do in fact have the pin in the middle of each screw from what I can tell. Can someone point me in the direction of the cheapest possible online source to purchase the correct screwdriver to open up my Pebble? I RMA-ed it and the replacement is on its way - but they’re letting me keep my current one so I’m going to try to fix the screen tearing using the method I saw on YouTube with the shim adding pressure to help ensure a solid connection for the display cable....

Chosen Solution hi… my right side of my trackpad doesnt function properly? it doesnt have the same “click” sound as it did yesterday or as the left side currently does. it also doesnt feel the same. any advice? this is most likely a swelled battery, if it happens so suddenly, just take apart and remove and replace battery. could try removing battery and testing the touch pad so you know if that was the cause....

Chosen Solution Hi all, I was going to change another lcd as always, but today i forget to shutdown the iphone and also i forget to unplug the battery with a plastic item. When I was unpluging the battery connector I touched somewhere and I saw a spark, after this I tried to connect again the iphone and it just dead. Do you know what I possible need to change for solving this short circuit?...

Chosen Solution In any game I play that involves aiming I press L2 to aim my character moves forward reset your controller the tiny hole at the back of the controller with a pin I got a controller that was doing that issue and I found a permanent fix to this problem. If resetting the controller does not work, the problem is related to the joystick (joystick drift). Sometimes it will just need a clean to the potentiometer and other times, you will need to change it but they are very cheap and easy to change (no soldering require)....

Chosen Solution I have now a bad Digitizer FPC connector on motherboard that has AT&T carrier, What Motherboard replacement do I need to get? I want to have a AT&T Carrier gain not just WiFi! Thank you in advance! @bombo2017 that will be a Gh82-06803a motherboard

Chosen Solution Hello everyone, I was wondering if any of you can help me. So I have the NEW Nintendo 3DS XL and I have noticed over time that the hinges are loose to the point where like you can actually wobble it when its open. It doesn’t affect my gameplay but it be really nice if someone were to help me. I have looked every where online, but I find nothing....

Chosen Solution I have a WM-4 Walkman, it doesn’t have the stop button, it needed a new belt, which I was able to replace with another portable player that I had laying around, it turns on and everything works, but when I play a tape the music sounds distorted and warbles, what can be done? and where can I get a new stop button? can it be 3d print? Hi, Perhaps the replacement belt was of the wrong diameter or thickness....

Chosen Solution I have recently got my IPhone 6 plus screen replaced not that long ago. Whenever I came back to the store they asked me to put my thumb on the thumbprint to unlock it. Note that whenever I broke my broken screen to them my thumbprint was still working and was able to be used. The cracks were near the top of the screen. Whenever I put my thumb onto the phone it was not working....

Chosen Solution So I bought a iPhone 6 Plus with a busted up screen and missing home button, got it pretty cheap. I repair iPhones so I’m always looking to buy broken ones to resale. I installed a new screen and homebutton on the iPhone and new front facing camera. My Touch ID never worked and I didn’t expect it to because I knew it was a after market homebutton. Well like 10 makes minutes ago I installed the new iOS 11 and after the update completed it asked me to set up my Touch ID and I was surprised when it was actually scanning my finger print!...

Chosen Solution I’ve recently changed my iPhone 11 screen. The screen comes on perfect but the touch screen does not work I’ve tried to reconnected but got no luck. What could be wrong? First did you disconnect the battery before you changed the screen? If so get a magnifying glass and check the connections for any damage or bent pins. Then clean the connectors with a qtip and alcohol and a soft brush....

Chosen Solution I once tried to replace the LCD on this device without a frame built in - and some how the red tape that I used made the LCD not work anymore - (I was trying to tape it to the original frame and was gentle with the part/flex). Of course, I brain-farted and tried to take the LCD out of the frame - thus breaking it (dang OLED panels!...

Chosen Solution My lg keeps turning off, have changed batteries in remote and unplugged for a couple of days, even did a reset and still shuts off by it’s self Try unplugging everything and plugging it all back in.