Chosen Solution Every disc I put in after a minute of loading in the end it just says no disc. I have tried everything from cleaning it to blowing in the tray and nothing willl work. Is there anything else I can do for it?? From my limited experience with DVD players, this problem is most typically a problem with the spindle drive motor - which spins the DVD and allows the laser light beam to read the information off the disc....
Chosen Solution HI Just got time to replace my new trackpad part. but just want to make sure if this is the same pad as my old one? attached photos I took from my Air, Please help me to check the year and part is right fo fit. thanks Henry Here’s the correct part MacBook Air 11" (Mid 2013-Early 2015) Trackpad Apple P/N 923-0429
Chosen Solution I want to convert a Thunderbolt Display I acquired very cheaply into a ‘dumb’ Cinema Display. I don’t care about the ports on the back, camera, or speakers. What I’m thinking, is internally converting the LED panel into Mini DP and drilling a hole in the back to route the cable out to a Mac Pro 5,1. Is it possible? I read online that the logic board runs mini DP into the LED and I just need an extension cable but I can’t find any images to support that claim....
Chosen Solution Hello, Saturday morning I was grabbing my Steam Gaming PC keyboard and the cord snagged something and the corner of the keyboard impacted my TV. Can I repair it? With the display off, there is no sign of damage, but when it’s on and I press the trails of light it looks like a crack. I am visually impaired and this old TV is way too small for me and my Gaming PC won’t even let me use it as a display (turns off just before Windows 10 finishes loading)....
Chosen Solution After a small fall the touch of my 5C not working, the glass or screen are not broken. I need your help. Thanks. Hello mbolanos , If possible I would open the phone up and check your LCD/Digitizer connection. Before you reconnect the LCD I would disconnect and reconnect the battery to prevent any lines running through the LCD. If that does not resolve the issue then the fall may have damaged your digitizer(touch sreen)....
Chosen Solution I have put in 4 diffrent screens and they all do the same thing they turn on look great but touch only half works and works half of the time can someone help what else could it be or what am I doing wrong I don’t think that I would get 4 bad screens Make sure all the connections to the motherboard are securely in place, there may be times when some of the cables are partly connected and some are not, leading it to not function properly....
Chosen Solution After the install finishes it flashes and doesn’t stop until I turn it off then back on then it says no bootable device please insert and press any key when usb drive with windows 7 on it is in please help Is the USB bootable? (Not just iso/dmg just dumped on)? Maybe also check the version, in case the Macbook is 32 bit and your installer is 64.
Chosen Solution Hello everyone, this will be my first post here. Model Number: RCA LED46C45RQ I salvaged an RCA 46” TV that has an indicator light, but doesn’t turn on when the power button is pressed. When I go to plug it in, the power supply draws power and I can hear the typical electrical arc hiss when the AC prongs bridge; so clearly it doesn draw some power. The Red LED lights, but the LEDs do not come on at all when plugged in, or when the power button is pressed....
Chosen Solution Recently, I dropped a few drops of water around the power key of my laptop. It did not show any issues then, but after shutting it down, it did not boot up. It shows as charging if plugged in though. Taking it to folks at geekbench resulted in a temporary solution where hard rebooting with battery removed (and power attached) leads to the laptop turning on. Now the laptop needs to hard booted that way or else it wont boot up....
Chosen Solution Hi all! https://streamable.com/0q6nt My washer is making this weird scary noise during spin cycle. Anyone know of what I can do? Or should I call a tech? Thanks! Reasons a washer will make noise during spin mode: Main tub bearing faulty Main drive pulley Motor coupling worn Bad clutch Worn out drive belt Clogged or damaged drain pump Transmission is worn out Shock absorber (front loader washers) Springs or dampening straps (top load washers) Agitator directional cogs aka “agitator dogs” (top load washers) Here’s a comprehensive tutorial on diagnostics and fixes for noise during the spin cycle: https://removeandreplace....
Chosen Solution I have a Kenmore stackable washer/dryer. When I put it on any setting, the light for said setting will come on, but when I push the “start” button, it makes one clicking sound and then that light just blinks. HELP Hi, Disconnect the power from the combo unit and use an Ohmmeter to check if the washer’s lid switch has continuity when it is operated. Here’s a link to shows the part Unfortunately its’ location is not shown in the parts diagram Scroll down the parts diagrams on the left side of the page to find the Control (6) parts diagram and click on it....
Chosen Solution My washer won’t run, when I push the start button it beeps and flashes SEE Well frankly there is no error code of SEE on this machine. Take another look and see if if could be something else. Meanwhile unplug it for 5 minutes to allow it to reset then see if it still gives you an error. ner come across that error code,but there is a possibility that it is either your display or that it’s a new error code....
Chosen Solution hi, my phone iPhone 6 plus had a glucose water (tang) shower, following is the transcript of how all went through. phone was still working; i tried switching it off… the screen kinf of flickered for couple of seconds, after that the apple white screen kept blinking for couple of minutes since then its dead. tried drying up with the hot air dryer. phone become hot like a hot plate....
Chosen Solution Hello and thanks! I have 2 - iPhone 8’s - the first one has a hardware issue where all you hear is static, on a receiving phone, when you call from this iPhone 8. [STATIC] And the other has a smashed front screen assembly. [SMASHED] My goal is to combine the phones to make one good iPhone 8. I have completely removed both front LCD assemblies successfully. I understand I need to move the home button from [SMASHED] LCD to the good LCD [STATIC] so that Touch ID will still work as desired before I put the un-smashed LCD on the known working iPhone [SMASHED] Are there any other parts of the LCD Display assembly that are married to the original hardware and need to be moved?...
Chosen Solution I was looking at upgrading my graphics card to something a little better for gaming. I was looking at the Raedon R9 series preferably the 290 or 390. The problem is i have no idea how this works so I don’t even know if these will physically fit in my computer. So can I upgrade to either of these (or another graphics card on par with these)? Sadly, you cannot upgrade the graphics card in an iMac....
Chosen Solution I have a furby boom with a battery compartment that got damaged by battery leakage. I am trying to make him functional with minimum disassembly. My plan was to disconnect the power cables from the battery connectors (the rusted metal will be removed) and use a rechargeable battery instead (lithium?). I was trying to figure out which specs I am looking at in terms of voltage and output amperage?...
Chosen Solution I ring one of my friends on my Samdung S III and I can hear them very well however they struggle to catch a word I say to them.. I take a lot of calls and I call a lot of people but im struggling to tell them something without them saying “what?” Or “speak up, I can barely hear you!”. Please help me… Your microphone port is probably plugged with lint....
Chosen Solution engine knocks when starting . Once engine starts, there is no knocking. I was wondering if it was a loose starter or motor mounts. Help please. Mike Could be so many things. First take it to an Auto-Zone and get a free computer read out.
Chosen Solution It turns back and then the taskbar flickers I am able to shut it down and reset it, lock it, sign out but nothing else There’re many methods that you can try with booting up to black screen issue. Press and hold the power button on your Surface for 30 seconds. Press and hold the volume-up button and the power button on your Surface at the same time for at least 15 seconds, and then release both....
Chosen Solution The iPad 2 can detect when the smart cover is closed. Before release, there was much speculation that it would include up to 3 IR proximity sensors. Are there any proximity sensors in the iPad 2? Is it possible to use the touch screen to detect when the cover is closed? The iPad doesn’t have any, it’s magnetic switch triggered by the smart cover, not a proximity sensor like on the iPhone....
