Posts

Chosen Solution Where can I get replacement hinges for HP Pavilion 15-cs0051cl??????? I love this laptop, but the hinge on the left is broken and the one on the right isn’t far behind! If you are looking for just the hinges these appear to be HP Spare Part Number L23884-001. You should be able to order these directly from HP if they have them in stock or you could do a search on Ebay to see if you can find them there as well....

Chosen Solution Hello, iMac Retina 5K 27" Late 2015 and iMac 21.5" Late 2012 I’m a graphic designer and photographer. I work primarily on an iMac (Retina 5K, 27", Late 2015). But we have an older iMac in the office that I’d like to use as a secondary monitor a iMac 21.5" Late 2012, so that I can work on two screens. I connected the two with a Thunderbolt to Thunderbolt cable and tried to connect through Target Display Mode by pressing command + F2 (I also tried command + fn + F2), and no dice....

Chosen Solution I have a 2012 Plasma that will go into a lockout with 6 error code flashes, I can reset it using the power button on the tv, it will sometimes work for a week following the reset before doing the same thing, the next time the reset may only before a matter of seconds. I have checked the boards for signs of failures with not obvious problems. The troubleshooting for 6 flashes states that the most probably fault is the sc board, with the next most probable being the “a” board....

Chosen Solution I have 1286 late 2008 15" 2.53 bookPro(serialnumberxxx56D61 GN) that have that problems: No Battery light on main cover at all Magsave light changes when charging or with SMC reset No reation at all at the start(no noise-absolutly nothing) battery is 2 months old,mag save is 85Watt and about 6 month old, -mac only requires 65 watt refer to the first original magsave. Have tryed to remove/swap RAM,key options with start and battery remove,Installed new magsave board(bought here-excellent service by the way :-)) no changes....

Chosen Solution The screen is flickering badly when the lid is in opened in certain positions or moved slightly Hello Betsy…Most likely the flatwire cable that connects to motherboard from screen has a break or breaks in it . Screen replace is done if so . there is a SMALL chance that connector has worked a little loose on motherboard . If you were to follow a teardown/disassemble video you can try re-seating connector ....

Chosen Solution Modern Maid Built in Toaster KBT100 Toaster heats but will not pop up Tom, Try unplugging it and cleaning all the crumbs out of it either through the slot on the bottom if there is a clean-out or through the top by shaking it vigorously. You might want to do it outside or at least over the garbage since there will be a lot of crumbs and it will be hard to control where they land as they fly out....

Chosen Solution My power jack broke so i took my laptop apart to replace it. I put it back together and now everything works except the wifi. I can still use the internet with ethernet. Is the a cable that is specifically for the antenna? انكسر جوالي ولكن لا يزال يعمل ماعدى الواي فاي عندما اريد تشغيله يقول لي لا يمكن تشغيله اريد اصلاح الواي فاي بجوالي لان جوالي سقط وانكسر لكنه لازال يشتغل ماعدى الواي فاي...

Chosen Solution Hello - I have a Hero 4 Silver and there’s something wrong with the top “capture” button… when its not in the case, you can’t push the top button down, but if you barely touch it, it will snap a picture when the camera is in the case, i can’t take any picture - the button doesnt move the button seems stuck but its super sensitive when outside of the case - kinda weird does anyone have any ideas?...

Chosen Solution Hello all, recently I had an issue with lines appearing on my screen and no matter what I did, they wouldn’t go away so I went to check on the issue. Even though I have never ONCE dropped or even bumped my computer, I needed a new screen. I went to get the screen replaced for a hefty chunk of change that made me cry a little at a certified service store and I just picked it back up but now my Touch Bar won’t respond!...

Chosen Solution Broken screen then i replaced with new LCD. Touch ID not working anymore and i still getting errors “Unable to activate Touch ID on this iPhone.” If you replaced the home button along with your screen, you will not be able to use the touch ID function, as they are linked (paired) with the motherboard. When you change it, touch ID will not work. If you still have the original home button, try reinstalling it with the new screen....

Chosen Solution hi, i have a iphone 6 plus, it was bent when i bought it, i changed its back housing, occasionally it shows white lines and touch screen stops reponding, i have to press it to make it working, first i thought it is lcd problem but today when i tried other one, it also have same issues and now touch has stopped permanently and i can’t use it, is there any way to fix it?...

Chosen Solution un46es6100fxza sometimes the screen will come on fuzzy or not at all but the sound works. prior to this for about 4 months the picture would come on but seem to flicker then it started doing what I just described. @fuzzybre a bad T-con board can produce the errors you describe. You do want to go ahead and remove the back of the TV and take a look for any obvious damaged components i....

Chosen Solution My Ubiquiti UniFi Switch US-8-150W (USW8P) suddenly stopped working and became 100% unresponsive. It’s just a month out of warranty, but nothing to do from the official site. Dreading the common PSU problem, I have verified that the PSU is outputting 53V DC and that I can easily draw current from it. On the mainboard, I have verified that the 24V POE voltage is available on the far end of the board, for all 8 ethernet ports....

Chosen Solution iPhone 6 Plus, a replacement device that apple gave to me. The Problem: Random Sleep / Lock Screen after a drop, 0.5m height without screen damage. It like a constanly pressing and releasing the Power Button, sometimes it goes to “slide to turn off” like a ling press. . It happens sometimes a day, its not constant. No contact with water. I realized that when a press the screen near the power button is like Im pressing the power button itself, the device locks/unlocks, or take print screen if Im pressing the Home Button....

Chosen Solution Hi everyone, The backlight of my laptop’s screen stopped working. I can see that the display is still ok. When I power on the laptop (or press the display on/off button on the keyboard while it’s already on) the backlight resurrects for a split second and goes off again. This happened everytime those two conditions were met. What do you think my options in this situation are? If necessary can I still find a matching inverter board and/or the light sources?...

Chosen Solution The tv wasnt used for about a year, i turn it on, and there are stripes down the center of the tv. I will attempt to fix it on my own, from research, i believe it is a bad t-con board. I was just looking for a second opinion on what might be wrong with it, what i need to do to fix it, and where to order the best (but cheapest) part....

Chosen Solution I have an LG wm2016cw, everything but the spin cycle is functional. I’ve tried resetting and that didn’t work. so, I put it in test mode and just ran the spin cycle. Ive tried hand spinning the drum but it doesn’t move or seems to be seized and Im getting a high pitch whine from the electromagnet in the back during test. I couldn’t find anything through Google and would appreciate any help with this....

Chosen Solution Hey, I was doing a Nexus 5X screen replacement and it seems that I have unintentionally ruined the new LCD. A small metal part has become detached from the flex cable. I connected the LCD to check it and the image went completely haywire. Could it be from this small part? What does it do? How can I attach it back? There doesn’t seem to be any glue involved....

Chosen Solution Hello, A few weeks my iPad showed this four code lines. I live in Kuwait & I don’t know of a local professional repair shop to fix it. If possible can you tell me how to fix this or give them to the fixer. I don’t want to loose my data as I don’t have a backup!! Update (08/30/2018) Hello, I forget to tell you at that my iPad doesn’t open !...

Chosen Solution So long story short. My timing belt a couple of years ago broke, resulting in the pistons colliding and damaging the cylinders. I had the pistons re-machined but she failed the state inspection due to weak cylinders. I plan on replacing the piston rings as a first step but was wondering as a last ditch effort can i replace the engine entirely. Therein lies the question. Should i replace it with one of the same make, model, and year....