Chosen Solution I spilled a small amount of liquid on my laptop 2 months ago. I wiped it immediately. I looked inside and saw no water damage. The button that indicates water damage isn’t red. I wiped isopropyl alcohol with q tips on my logic board. My laptop still doesn’t work. I don’t know what’s the problem. I don’t see any corrosion. Could it be a battery problem? I powered it too see it would it work....
Chosen Solution Does the Nexus 6p have a Optical, Capacitive or Ultrasonic fingerprint scanner and who manufactures them? The type of Nexus fingerprint scanner is Capacitive. Most of the smartphone on market are Capacitive. The Optical may used in iPhone 8. If you need some phone replacement, you can go to Etrade Supply for help.
Chosen Solution My computer glass cracked and I can’t find a replacement one You mean the screen? https://www.amazon.com/Replacement-1920x...https://www.asus-accessories.com/all-in-...https://www.ebay.com/p/7003412613
Chosen Solution Does anybody know where I can source a replacement logic board for an Apple TV 3rd Generation? I’ve taken a look at the Apple TV 3rd Generation Logic Board Replacement guide by Vincent but there’s no reference on where a replacement board can be found. Our AppleTV has the same issue. Last time it was on it was working and the cable was working. I did restore the software, and the unit turns on and off, but the TV displays a “No Video input” error....
Chosen Solution Hello! I accidentally dropped my phone into water, I tried to switch on the phone after trying to remove water by heating it with a dryer. The phone was working but I could see only huawei logo after that the screen was blank. But now when I try to switch on my phone, it is not working. I came to know from a person that if i replace the motherboard, maybe the phone would start working....
Chosen Solution I have a 55 inch TCL 55Ç803 Roku TV that I found at someone’s curbside for trash. The remote and power cord was included. The unit is very clean and no physical damage, so I optimistically brought out home for testing. The TV powers on, lights up (but no image) and is dark with no lines etc. I can turn volume up and hear the familiar clicking of a the roku device imbedded, but no screen to navigate....
Chosen Solution how to remove front cover on sony bravia tv this is an old question and just answer it for completion sake. The front cover does not come off separately. It is not like a front bezel on the smaller monitors. You will have to open your TV from the back and remove the panel and some of the boards in order to get to the front of the case....
Chosen Solution the shutter mirror got stuck. What to do about this? @splashmit you can find a really good writeup about the issues with the stuck mirror on the Nikon D model cameras on here When you do your repair, take plenty of pictures and create a guide for the rest of us. It’ll help the next person that has the same issue with their camera. Create a new Guide - iFixit
Chosen Solution Can you fix the dvd navigation and eject button? Thanks. I have seen this happen once on a cassette tape deck. There was absolutely nothing you could do to make the deck eject the cassette. Try resetting the power to the unit by disconnecting the vehicle’s negative battery cable for a few minutes to an hour or do the computer reset process. When you reconnect the battery and turn the car on, it may eject the disc or the nav unit may begin to work properly again....
Chosen Solution When plugged in the nutribullet does not rotate. I opened it fully thinking the motor winding would have burnt but to my surprise the Base Gear is sticking to its base cup. I tried to remove it but it is so firm it is not coming out. Tried bit of heating the whole thing but it does not. Any clue Have you removed the four screws? Magic Bullet NutriBullet Base Replacement
Chosen Solution Good afternoon. After replacing the battery (Iphone 5s 16gb) has stopped working Touch ID. The displays are not displayed any mechanical damage. Applying the finger to the sensor, not what happens. On the screen is reflected by the scanning finger. The service does not know why. Tried to reinstall software to factory settings , did not help. Please help with this problem. Does your home button work without the TouchID functionality?...
Chosen Solution I have and old 2010 Macbook Pro 15 that has done an amazing job to keep going for 9 years. I mostly use it as a media server and a few emails these days. I recently took it for a clean and had the thermal paste reapplied. That appears to have done it a world of good as temperatures are reading about 5-10 degrees lower. Unfortunately on putting it back together the repair shop have been unable to get the trackpad to work again....
Chosen Solution Hi, I recently was stuck in a boot loop with error 4013 and saw online that it could be the proximity sensor. I opened up my iPhone XS, unplugged the sensor, and my iPhone could finally boot up. However, now my touch screen isn’t responding, and I’ve tried unplugging and replugging the other sensors. Do I need to replace the screen? Unfortunately it sounds like the digitizer may have been damaged if none of the other connectors or sensors return function to the device when unplugged/plugged....
Chosen Solution From yesterday my trackpad has been behaving weirdly, the mouse pointer is stuck and does not function. Are there any instructions on how to debug or replace the trackpad? Looking for some guidance on it. Update (02/24/2019) The battery covers the trackpad sadly so you need to take it out to even get to the adjustment screw or to replace it. Here’s the guide you’ll need to follow: Battery and Trackpad....
Chosen Solution After replacing the battery on a 13" MBP, my trackpad and keyboard are no longer functions at all. Power button works, but I have no caps lock light on the keyboard on boot or when gets to login screen.I’ve checked I/O cable and all seems to be fine seated correctly.I’ve also noticed the trackpad does’t seem to have any type of click when pressing it, when I know it did before the batttery was replaced....
Chosen Solution How do I reset my camera. I’ve replaced the batteries, but it still gives me this error: TURN POWER OFF AND ON. @sway2019 a lot of times this is actually caused by something that is interfering with the lens extension mechanism. If your camera detect that there are issues with the lens it will have the same response. Check on here for some more information and potential fixes. Personally I have had not much luck with those and replaced the lenses on cameras....
Chosen Solution Can I upgrade my 5th Generation 30gb ipod to 120gb using iflash SDXC adapter. @elviria yes it can be done. Watch the ExFAT format that is a default for some of the cards. Your iPod will not like that. Anyhow, if you do a good online search you will find many places that are walking you through that process. iFixit is more of a hardware repair forum than a modder’s one....
Chosen Solution i have an iphone 6 the vibrator was working befor replacing the screen i still haven’t closed the screen into the chassis when i switch to the vibrate option it makes a very very low noise what going on? is the screen supposed to be intact in order for the vibrator to make noise? It’ll still vibrate with screen closed. Try checking if you disassembled the vibrate motor and reassembling....
Chosen Solution I have a Maytag front loader MHW5630HW washer. The cycle time for Normal/Regular wash was 51 minutes now it is at 1 hour and 41 minutes. Unplugged it for 10 minutes still at 1 hour and 41 minutes. If started it will wash but cycle will take close to 2 hours to complete. Changing cycles does change time. Water pressure looks and sounds good. Any suggestions to reset it?...
Chosen Solution My dad accidentally forgot his phone in his pocket and washed the phone. Pretty much whole phone died so he repaired it and now the rear camera and flashlight maybe even the rear microphone. First things first I would decontaminate the logic board. Get some 91% isopropyl alcohol and put the logic board in it for a few minute and lightly scrub with a toothbrush. Clean all of the connectors and everything like that....
