Posts

Chosen Solution Hello, im writing in here because i have a problem with my Macbook air from mid 2011. I bought the mac a few months ago with a defect touchpad that wouldn’t move the cursor or right click (it’s able to click normally though), thinking that it would be easy to fix, just by replacing the touchpad. Now a few months later i’ve tried: Changing the touchpad (same result. I used the exact same touchpad model) Changing the touchpad cable Resetting all kinds of stuff Calling apple support and following their instruction And messing with the touchpad settings But nothing seems to work, currently im using a wireless logitech mouse to control the cursor which works perfectly fine....

Chosen Solution Hello, I own a 2017 13’’ MacBook pro (two thunderbolts no touch bar) bought in Jan/2018 and I absolutely hate the keyboard. Hate the sound it makes, I hate how little displacement of the keys. Sometimes I even go back to working on my MPB 2011 just to remember how good Apple’s keyboards were. However, I have noticed that the newer MacBook pro’s (2020-onwards) keyboard is noticeably better. I was wondering if any knows if it’s possible to install a 2020 MacBook pro keyboard system on a MacBook Pro 2017....

Chosen Solution TL,DR — Machine kernel panics and will not boot to any mode of recovery including external boot disks and drives. ——- I am a repair tech in a mom and pop shop. Due to recent employee changes, I now have to work on Mac repairs. A customer couldn’t remember their old Apple ID and wanted to switch their MacBook Pro to their new one and abandon their old ID....

Chosen Solution I have a Whirlpool washer/dryer combo in which the washer has stopped working. This happened earlier today. I checked and the dryer still runs. I have unplugged the unit from the wall for a minute and also opened/closed the lid multiple times within a few seconds and that hasn’t reset it or anything. I am not sure where in the cycle the washer stopped because I didn’t pay attention to the knob before trying to figure out what was wrong with it, but the washer is full of water....

Chosen Solution washer fills but does not drain and it still completes the cycle It could be a couple things. The most likely is the pump that’s pumps the water out has failed!

Chosen Solution No specific guide, just looking through other QAs and videos. But can someone clarify something… I’m following the MacBook Pro 13" Retina Display Early 2015 Logic Board Replacement Logic board replacement guide… but they removed the heatsink. I do NOT need to do this if I just want to replace the keyboard right? Is there anything else in the guide I should not need to do for keyboard replace?...

Chosen Solution I have 2 exhaust pipes and each is stamped with information regarding emissions. The pipes probably came from a bike from the 1990’s or early 2000’s. There is a lot of info stamped on the pipes and one line says installation of this exhaust system on motorcycles models not specified may violate federal law and it list the exhaust system for the following motorcycle HONMAM 1500. What kind of motorcycle is this for?...

Chosen Solution Hi guys, I have a mid 2009 MacBook Pro and my lvds cable is faulty so I’m needing to replace it however, on the lvds connector that’s soldered to the logic board, there is a gold plate, mine has fallen off. Does anybody know if this gold plate plays a part in the display operating or what is its purpose? Thank you! `` `` The plate is part of the EMI screening to prevent signal leakage as well as intrusion from other sources....

Chosen Solution Found this while reassembling anyone know what it goes to? It is a syringe screw cap. Possibly came from a heatsink/liquid solder or flux syringe. Not part of your PlayStation.

Chosen Solution Hi Guys, Have a YTL bluetooth speaker thats not charging, so am going to replace the type b micro usb connector but can not find it. It seems to only have two contact points that go through the PCD and near the pins it has two black plastic humps that go into the PCD also. Does anyone know what spec it is? trying to find it on Digikey but am having no luck scrolling through the 1000’s of connector they have....

Chosen Solution I can’t get my WiFi to connect to the baby camera, what should I do? Not Connected to Specific Wi-Fi Network Make sure that your phone/device is connected to the Wi-Fi Network that is specific to your Wi-Fi Baby Camera (called “myBabyCam-xxxx”). The “xxxx” part of the Wi-Fi will be specific to every individual Wi-Fi Baby Camera and is located on the label on the back of the Wi-Fi Baby Camera as well as on the back of the quick installation guide....

Chosen Solution When I put my air heater on the first level of hot the fan doesn’t spin but the heating coil turns on.On the second level of hot the fan spins and its all good but the problem is that i don’t want it always being on the second level.This problem started lately and for the past couple of years it was all good.The haters model is:Rowenta-Mod. S06215F0 https://drive.google.com/file/d/1LdzRhU0…...

Chosen Solution I want my ps4 pro to have a new look but I don’t want too use the shell/housing it came with just in case I ruin it You may have to purchase a broken one off of ebay and use the shell from it. Try here: ps4 pro We’re can I get a replacement for the top cover off the PS4 pro console I want a brand new top cover for my PS4 pro...

Chosen Solution Hello. My tablet Gakaxy Tab E SM T561 works fine while I’m using it. After 6 to 7 hours of use or within 2 to 3 days it will suddenly stop responding to my touch. Turning it on or off doesn’t solve the problem. The only thing that seems to work is that if I leave it untouched for a couple of days it would start working normally again and go back to same issue again and the cycle repeats itself....

Chosen Solution please help If the machine has not been used in a long time, the lever and/or feed dog mechanism might be frozen. It will take patience and time to oil with something like Tri Flow (might need to set for a while to penetrate), then use the warm setting on a hair dryer at low speed to heat up the area as you move the lever up and down....

Chosen Solution This weekend I was in South Florida. It wasn’t particularly hot or humid, but suddenly I noticed that the thumb rest - on the panel on the back of the camera, next to the red cord button, had come unglued. I found the piece on the ground, and it was stick enough to put back on. However, it isn’t stable. How can I repair this?

Chosen Solution The sound keeps cutting out on on my vizio tv There could be a number of reasons for this, but a few questions first: When the sound cuts out, does it return on its own or do you need to shutdown and restart the TV? Do all other functions work on the set as expected even when the sound fails? When does the sound cut out? Right away or only after the set is on for a while?...

Chosen Solution Hi there, i was reading these posts and i have a similar problem. There are permanent thin horizontal lines running over my entire screen. On top and bottom the lines are worse. They are not entirely black but transparent. The lines appear on every input source but some sources have more lines than others. Lines seem to be less visible on the tv menu and on the tv test image there are no lines at all....

Chosen Solution 16GB 3GS Replaced Digitizer now third party apps try to launch but immeadeatly crash. All Apple apps/phone/text/email work fine. I have done this repair many times, this issue has me baffled? Any ideas? I have found an app resync from iTunes fixed the issue for me. I removed all of the apps from the phone and reinstalled them from the app store.

Chosen Solution I own a local repair shop and this dreaded issue is back! The ipad mini 1,2 had this issue of the ipad touch screen acting crazy on its own as if someone was opening and closing apps. A simple solution solved that issue with Kapton tape. This solution was applied to the ipad mini 3 screen but does not solve the crazy/acting on its own touch screen issue. Does anyone know a solution to this issue....