Posts

Chosen Solution I’ve just bought a used Macbook Pro (13”, early 2015, manufactured in 2016). It hasn’t been tampered with as far as I know, but there is a strange clicking noise that’s coming from the body. It’s similar to a HDD click if you know what I’m talking about, but it obviously has an ssd. It seemingly occurs at random times, and not related to speaker volume. By the sound it’s like something mechanical....

Chosen Solution what kind of oil does the craftsman kohler 15.5 ohv riding mower take Here’s the pricey answer: http://www.sears.com/shc/s/p_10153_12605… Here’s just the 4 cycle oil: http://www.sears.com/shc/s/p_10153_12605…

Chosen Solution I have UX32VD. I used to use my iSSD as a second storage partition. Now it died. Until a few hours ago, I was running windows 10 preview. Here follows what I have done and my problem 1 - Removed the HDD and replace by SSD Saumsung EVO 850. 2 - Tryed to do a clean install of windows 10, it ends in an infinit loop and never reaches the installation menu....

Chosen Solution The charger lamp turns on and off fast as if the wire is shaking and it doesn’t charge Are you able to boot into Windows normally? Please try to boot into BIOS and check what is the status of the battery / adapter listed.Please update the BIOS to the latest available version from the manufacture site. If the battery is not charging, it’s either a… Bad battery Bad charging circuit (faulty motherboard) Bad AC adapter (You can check with an alternate adapter) You should reach out to the manufacturer for support/warranty service, or consider returning the laptop for replacement....

Chosen Solution Please help me.when I start my PC and when I use back space it comes this [ after that second time it shutdown this happens in another keys also like I use Ctrl it types 0 and many please help Have you tried a different known good keyboard to see if the issue may lie with the keyboard itself?

Chosen Solution I recent lost one screen due to a minor accident and oculus does not do repairs nor sell the parts required to do so, so i would like to know where can i go to get the necessary parts to get my cv1 back in working condition. Oculus doesn’t help and likely never will help with this. My best advice is to buy a cheap headset online from someone and take the parts from it or try and find a “ma and pop” shop that just so happens to deal with this stuff....

Chosen Solution Please, I’m from Brazil and I have a small business for supporting laptops. I have a request to support 10 Macbook with logic board bad, therefore I’m looking for a place wherever it is to buy 10 logic board - A1989 EMC 3358 - 8GB memory and 512GB SSD. These should all be under warranty.

Chosen Solution tablet wont start, charge, or go into recovery mode. what can I do? Hi, Did you try using a different known working, compatible charger or perhaps connecting the tablet’s micro USB port to a computer to see if it charges at all, you didn’t say? Did you try pressing the recessed reset button for 5-10 seconds with a straightened out paperclip and then checked if it worked OK?...

Chosen Solution I pushed on screen and now display shows text on top half plus, but graphics on bottom half The Kindle Paperwhite screen uses e-ink which will keep displaying the last image it was changed to even if the device runs out of power or if the display is disconnected from the rest of the device. Power and input from the paperwhite’s processor is only needed to change what is displayed....

Chosen Solution I think the battery on my helicopter is nearing the end of its life. What should I do to fix this problem? Unfortunatly, it looks like this modal of RC Copter is not easily replaceable. From the manufacturers service manual (Gyropter-2013.pdf - Page 8) it says: RECHARGEABLE BATTERY: This helicopter uses an internal Li-Poly rechargeable battery and is not replaceable. If battery no longer stays charged, dispose of battery properly according to local disposal requirements....

Chosen Solution I did a screen replacement on my iPhone 6+, and the cable in the photo: https://imgur.com/tPbQQzr Won’t connect to the phone. What can i do? Hi Tomer, If the connection on your motherboard isn’t mashed or damaged then you should have no problem plugging this cable in. You could be attempting to plug the cable into the wrong socket on the mainboard, a mistake I see trainee’s making when doing iphone 6 repairs and not putting the cables in the right spot....

Chosen Solution several issues. shuts off before clothes are dry but clothes are hot, and takes 2 hrs to dry a load. Cause 1 Air Flow Problem If the vent is clogged or partially clogged, it will restrict the airflow through the dryer, substantially increasing the drying time. To ensure proper dryer performance, you should clean your dryer’s venting system at least once per year. Cause 2 Blower Wheel The blower wheel works with the drive motor to draw air into the dryer drum....

Chosen Solution My phone was dropped and the glass for the camera on the back is cracked. The only piece of glass on the whole back of the phone. I would like to replace it since it is causing a white cloud on the bottom of photos. Is this part a available? Update (08/07/2020) My phone is different than the one in the video, the back comes off around the camera, the camera’s glass cover stays on the phone....

Chosen Solution The ports on the side opposite the charge give out a burning smell, I had connected it to charge and it started smelling and heating up Please make sure you have the correct MagSafe charger and the connector faces are in good order. Review this Apple T/N Apple Portables: Troubleshooting MagSafe adapters You may want make sure you have a real Apple unit. There are quite a few fakes which can damage your system!...

Chosen Solution My Toshiba Tv Blinks On Startup, I Replaced the PSU/Backlight inverter Still Blinks the backlight on startup. I tried to set the backlight to 50 because it was 0 still did not do any thing.i used a flashlight to see what was on the screen. Pasta YT you will have to measure tehe voltage from the power board to the LED’s and check to make sure that your mainboard enables the backlight....

Chosen Solution Here are some pics of the PC can anyone help me indentify the bios reset jumper pins location. Please look at last picture I highlighted the 2 spots. Are these the pins I have to jump or? @reddog77 another dreadful company that does absolutely despises DIY repairs! No help from them. Anyhow, the reset jumper is most commonly marked as JRSTxxxx Looks like it is in your last picture in the 3 o’clock position....

Chosen Solution I recently replaced the battery of my iPhone 5s. After restarting the iPhone I realized that the cellular network was gone and the functionality of the home button was limited. I solved the first problem by resetting the network settings. The second problem, however, is still there. Touch ID is working properly but it does not react to my clicking. I cannot see any visible damage on the cable and I don’t know how it is possible that Touch ID is still working while the other functions are not as there is only one cable....

Chosen Solution Truck turns over and shuts right back off. I have changed fuel injectors plugs and wires oil and oil filter changing the mass flow air sensor tommorow really could use some insight You likely have a bad sensor or one that the plug is loose on. It’s probably the MAF sensor or plug from your description . Next thing to check is to see if it is getting fuel when you have this problem....

Chosen Solution I don’t understand why you have to go through all the trouble shooting for a fairly new tv. (bought this past summer in July) Should be able to trade for a new one or should come fix it. I don’t quite understand your question. Are you looking for a DIY fix or a support number for a technician? For a DIY the model is needed. It’s most likely a connector issue....

Chosen Solution About a few weeks ago, I decided to dual boot for the first time. And, Pop!_OS appeared to be the perfect linux distro.But, one small issue (actually not that small…), my BIOS doesn’t quite work anymore!When I press f2, the screen just blacks out, and my mouse just reverts to its basic lighting option.I have uninstalled Pop!_OS, yet, my BIOS still has the same issue… I have the acer BIOS version 1....