Posts

Chosen Solution The screen only shows half a display. it looks like a virus Priscilla Archer this is usually caused by a bad LCD not a virus. You could try a reset by turning off the tablet fully (ensure that you battery is charged) Hold down the volume up and power button together for about 12-15 seconds until the first android logo comes up. When this happens, release both buttons. If that does not resolve it, consider replacing the display....

Chosen Solution whene the xbox power on the red lite show aboute 5 sec later the dvd open up and spin the hard driv is good ? is it. reflow wont make any difference the red light indicates a problem on the motherboard due to a fuse blown or a short in the circuit its like a airbag system the xbox 360 slim tests all the circuits on the motherboard and if everything is ok then green if theres a short or blown fuse or blown capacitor then you will get a red light therefore it wont turn on nothing to do with reflow they fixed the over heating problem on this one...

Chosen Solution Hi all, I did a battery replacement on my wife’s XS (previously had done my own). I checked the phone and screen before reassembly and all was working fine. After reassembly I had some weird lines on the display, and figured I had pinched a cable? Anyway, please help: I (mostly) removed the screen without removing the pentalobe screws. The screen no longer works. Can I just buy an iFixit replacement screen or have I done worse damage?...

Chosen Solution I’m trying to see what I can do to boost my 2011 MBP 2.3GHz 4GB Ram. I have a 318GB Hard Drive and still have over 210GB of free space. I want to extend the life of my machine as long as possible. What would be better to upgrade the RAM to 8GB or swap out to a SSD? I’d do the hard drive but with a hybrid type if one exists sizewise....

Chosen Solution My Shark lift away turns on and suction is ok but green light doesn’t turn on and brush doesn’t move when I try to push the vacuum. Everything is in place ok and no blockage. have you checked the belt to see if it broke? We found all ten screws, and finally got it apart. The belt was fine. I stressed it by using outside on dirty outdoor carpet with leaves....

Chosen Solution Hi , I have a problem With my android phone That started After the OS Stucked and Freezed But then i removed the sd card and started working fine But the problem is that When i try to charge it, It charges very very slow, one night of charging gives 3 percent but still connecting to pc And transfers data normally , i tried everything like changing adapter and Cable but still nothing i discovered that when i put my tongue In the pins that connects to the battery they deliver very low Current compared to my other galaxy j5 phone ....

Chosen Solution I have a vizio xvt553sv when you try to power on the t.v. The vizio light on the front just flashes. I’ve tried a power cycle but the television still will not turn on. I’ve replaced a few capacitors on my older tv. One was hard to find, they usually show a burn mark. If you have a multi reader and patients you will find it since there are quite a few of them....

Chosen Solution my Whirpool washer front load WFW8620H keeps spinning at the end cycle until I manually shut it off I’ve noticed that if I choose the wash and dry option it shows 12 hours as estimate ( maybe totally irrelevant ) any idea if its easy to fix or needs a technician and what is the problem? Most likely a failed timer. To get you to the correct part, please check the model number you gave and see if there are two more letters and give us those....

Chosen Solution Hi I have a GDF530PGMWW dishwasher that is leaking water in from the fill hole even when off. It is brand new and I perplexed why this is happening. It is coming out of the hole pictured, its a steady stream. Thanks Sounds like it is still under warranty. I would contact the seller. It does sound like the water inlet valve.

Chosen Solution I’ll be honest about what exactly happened. I spilled water on the left side of the Macbook, over the speaker grill. Seemed okay afterwards but decided to turn it off anyway. I used tissues to get it to what I thought was dry enough, and as it hadn’t switched off after I spilled it, thought it was fine. Once switched off, it wouldn’t charge at all. Eventually after using a hairdryer (Which I realise now isn’t recommended), it started to charge again....

Chosen Solution Hello, I know ABSALUTLEY nothing about TVs. My tv has random colored lines on half of my screen. I got the tv from my friend and it worked perfectly when she had it. I guess when we moved it, it got hit or something in the process. Again, I know nothing about TVs but I do know basics. So if you know what the problem is or how to fix it, please let me know step by step....

Chosen Solution So this is whats been happening all of a sudden overnight… https://streamable.com/ya7ay When I plug in my headphones and open iTunes, the headphone jack doesn’t work (Tried 2 different headphones) I played around with the sound settings - muting sound, microphone etc to no avail. This “static sound” comes from both speakers and comes on when the Mac plays a sound file (notification) iTunes or a website that has media files on it....

Chosen Solution Along with loosening all of the other walls, I removed the left side panel (under the viewfinder) and a little yellow wire ribbon came out with it. I can’t even find the other end of the tear inside the camera. The tear occurs just after a right-angle bend in the cable. Also, I can’t determine how to detach the main golden wire ribbon from the lens (I’m attempting a lens replacement), despite removing several screws on a large, circular silver plate....

Chosen Solution The plastic circle in the front where it spins is coming apart, on the spin cycle it makes a lot of noise , plastic streads tear off! Help how I fix this stop this! The Ours is doing exactly the same thing. Just called Sears Appliance Repair and they are going to come and take a look (for $85!).

Chosen Solution I need to replace the power switch on my blendtec it’s faulty what’s the model number so I can replace it. If you bought your blendtec after 2011, you have a 7 year warranty. If you bought from Costco, you have an 8 year warranty. Blendtec will either repair your base or send you a refurbished base that will continue on in the same warranty as original. Free shipping to return the malfunctioning base....

Chosen Solution My dog chewed through the power cord in my google home mini. Where can I buy a replacement? Best Buy wasn’t sure if any cord would work. It uses any standard “micro usb” charge cable and charge port. Take a look at the end of the cord and I bet you’ll find one that matches that within your house. You can then plug that cord into any standard USB outlet....

Chosen Solution Original Post: EPSON 3010 MOVIE PROJECTOR projector some time shows a green picture a few seconds then is off, I think is overheating Johnny Saltos,most common cause for that is a bad air filter. I’d start by replacing it If the filters new and the Fans are running at the normal speed , then its most likely ur ma inboard that needs replacement! We have had a few of these units come with the mainboard problem!...

Chosen Solution WIFI antenna was broken between the connect point of WIFI antenna and the mother board. Is it possible to fix it? You are very lucky! You should be able to carefully pop off the board connector from the cable then using a fine soldering iron re-attach it. You’ll only get one chance here so you need to be sure you can do this. If not, you should find someone with the tools & skills to do it for you....

Chosen Solution When i plug my phone in, it might charge for a little while but then i get a notification saying “this accessory may not be supported” and then stops charging. super annoying, especially if i am away from my phone and can’t unplug the charger and re plug it in for it to start charging again. do i need to replace my battery? how do you fix this....

Chosen Solution I destroyed my screen. Utterly ruined, So i decided that it would be a relatively easy replacement and descided to take it apart. My screen was so damaged it had ridged on the side, and when i heated up the back so did i the the ridges of the screen, and pried to the screen apart when i intended to take off the back. I have no Ccamera to take to show to what stage im at with the phone, and I only work on analog edlectronics to a novice degree to my knowledge about digital is scant....